quikgix
Expert Class
Posts: 274
|
posted April 28, 2012 09:49 PM
New best on nitrous
First here are my mods, 07 zx14. Sims Ported head w/APE springs,degreed cams,Comp CNC 47mm TB's,Brocks clutch springs,Brocks SS Sidewinder,68" wb,zx10 wheels,Adams spraybar,Schnitz two knob and MRX01. 1.35- 60'
3.58 -330'
5.29@138mph
8.16@167.9mph
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
  
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted April 28, 2012 10:17 PM
Wow....
|
01smokes
Needs a job
Posts: 2243
|
posted April 28, 2012 11:24 PM
good lord!!! that is fuckin scootin!!!
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
SixSixoh6
Zone Head
Posts: 660
|
posted April 29, 2012 02:26 AM
thats gettin it done-zo
____________
2006 ZX-14: Murdered out, in the dirt, extended, sprayed, air shifted, geared--GONE
2009 ZX-14 SE--has two wheels and an engine
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted April 29, 2012 03:28 AM
How much spray is that?
That's getting it done! Getting close to real street numbers( depending on your weight and wheelbase)
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
edszx14
Expert Class
Posts: 271
|
posted April 29, 2012 04:06 AM
Congratualions, I sure like those numbers. Now you have to change the times in your signature. Good Job.
____________
Ed
|
quikgix
Expert Class
Posts: 274
|
posted April 29, 2012 05:22 AM
quote:
How much spray is that?
That's getting it done! Getting close to real street numbers( depending on your weight and wheelbase)
4 - #20 jets supposed to be 60hp. After tuning we picked up 75hp
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
|
WRECKSHOP
Expert Class
Posts: 359
|
posted April 29, 2012 06:43 AM
You meant Competition CNC ported head, right ?
|
02zx12rbob
Expert Class
Posts: 496
|
posted April 29, 2012 07:01 AM
Great Job !!
|
smokinstorm
Zone Head
Old Drag Racer
Posts: 504
|
posted April 29, 2012 07:10 AM
Congrats. That's a strong time for sure. You're flying on the motor also. Just curious, what's your raceweight and what do you weigh? You're seriously getting the job done.
____________
2009 Monster Edition ZX14
It's all stock I swear. Well...almost.
2005 Turbo Busa
2001 GSXR 1000
Looking for a 1985 GS1150E
|
quikgix
Expert Class
Posts: 274
|
posted April 29, 2012 07:25 AM
Richard Sims ported my cylinder head
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
|
quikgix
Expert Class
Posts: 274
|
posted April 29, 2012 07:28 AM
quote:
Congrats. That's a strong time for sure. You're flying on the motor also. Just curious, what's your raceweight and what do you weigh? You're seriously getting the job done.
635lbs total
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
|
smokinZX14
Needs a life
Posts: 10197
|
posted April 29, 2012 07:49 AM
Well done Sir !!!
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
zx12mark
Pro
Posts: 1654
|
posted April 29, 2012 12:47 PM
man that had to be a thrill flyin thru the traps at that foward rush....
|
dakota9498
Pro
Posts: 1181
|
posted April 30, 2012 07:23 AM
Great job man, I think you will be hitting your goal of 7s this year!! Awesome!
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
blackbullet76
Pro
Posts: 1134
|
posted April 30, 2012 10:08 AM
Imagine that setup on a new 14....in the 7's possibly?
____________
2007 ZX-14 black
Brocks s-meg exhaust
PCIII w/track map
BMC race filter
Flies removed
16 tooth front sprocket
Speedohealer
APE cam chain tensioner
Vortex rearsets
|
01smokes
Needs a job
Posts: 2243
|
posted April 30, 2012 10:12 AM
quote:
Imagine that setup on a new 14....in the 7's possibly?
Buy a new 14 and tell us how it works out for you
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
quikgix
Expert Class
Posts: 274
|
posted April 30, 2012 01:44 PM
My bike put down 261HP with 130ftlbs torque on the jug. The new 14 would make big torque on the juice for sure. I think 7's wouldnt be an issue. Can someone lend me thier new 14R?? Heehee
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
|
zx13r
Expert Class
Capt-America
Posts: 181
|
posted April 30, 2012 02:02 PM
NICE!!!
____________
Sposored By:
Kawasaki Sports Center
ShoTime Graphics.com
|
BLK ICE
Pro
we'll leave the light on for u
Posts: 1709
|
posted April 30, 2012 02:19 PM
quote:
Imagine that setup on a new 14....in the 7's possibly?
At this level, there is no need to buy a 14r for $13,XXX, when bigger pills and a tune are less than $400.
Congrats,Strong Work!
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
|
CraZX14
Expert Class
Posts: 399
|
posted April 30, 2012 03:23 PM
Sims
quote:
Richard Sims ported my cylinder head
Really good guy with a great rep for knowing his Kawis. My 14R is at his shop down the street right now actually waiting for some go fast goodies to be installed. That's fantastic how fast your bike went, man!
____________
2003 L.E. Hayabusa
|
quikgix
Expert Class
Posts: 274
|
posted April 30, 2012 09:06 PM
quote:
quote:
Richard Sims ported my cylinder head
Really good guy with a great rep for knowing his Kawis. My 14R is at his shop down the street right now actually waiting for some go fast goodies to be installed. That's fantastic how fast your bike went, man!
Hows it going Scott?You gonna be at Sacramento for the next Grudgefest? Im gonna add more nitrous at the hit and see what she does.
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
|
CraZX14
Expert Class
Posts: 399
|
posted May 01, 2012 08:03 AM
Sac Raceway
quote:
quote:
quote:
Richard Sims ported my cylinder head
Really good guy with a great rep for knowing his Kawis. My 14R is at his shop down the street right now actually waiting for some go fast goodies to be installed. That's fantastic how fast your bike went, man!
Hows it going Scott?You gonna be at Sacramento for the next Grudgefest? Im gonna add more nitrous at the hit and see what she does.
Hey Anthony - going good, thanks! Funny, I was just looking at Sac Raceway's online event schedule right before I hopped on here this morning and saw that May 12th is the next Grudgefest, and yep, I'll be there. Haven't ridden a swb bike down the track in years so it should be fun. I look forward to watching you rocket closer to a 7-sec pass!
____________
2003 L.E. Hayabusa
|
|
|
HOME
NEW TOPIC