FAST Z14
Expert Class
Posts: 184
|
posted April 10, 2012 12:09 AM
Bazzaz or PC 5 for Zx14R
We have Brock CT single full systems on order for our Zx 14R's, what would you guys recommend Bazzaz or PC 5. I have heard that you can fine tune better through the gears with the Bazzaz is this true?
____________
FOLY HUCK
  
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted April 10, 2012 02:48 AM
Pcv
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Seno
Pro
BANNED FOR LIFE!
Posts: 1230
|
posted April 10, 2012 04:13 AM
+1, PCV
____________
2012 Black 14R -> Completely done!
|
Bazzaz Support
Parking Attendant
Posts: 10
|
posted April 10, 2012 09:14 AM
Keep in mind that Bazzaz connects and tunes off of both upper and lower injectors. Also takes into account throttle position,gear position and vehicle speed
____________
Bazzaz
Rich McGee
909-597-8300 X 107
|
WRECKSHOP
Expert Class
Posts: 359
|
posted April 10, 2012 09:27 AM
When will thye Bazzaz unit's be made available for purchase ?????
|
dakota9498
Pro
Posts: 1181
|
posted April 10, 2012 09:35 AM
quote:
Keep in mind that Bazzaz connects and tunes off of both upper and lower injectors. Also takes into account throttle position,gear position and vehicle speed
Wow, it adds a set of injectors to the ZX-14!! That is awesome! I am definitely going to buy a product from someone that doesn't even know that the ZX-14 that their product is for only has one set of injectors.
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
Lucky14
Pro
Posts: 1439
|
posted April 10, 2012 10:30 AM
quote:
quote:
Keep in mind that Bazzaz connects and tunes off of both upper and lower injectors. Also takes into account throttle position,gear position and vehicle speed
Wow, it adds a set of injectors to the ZX-14!! That is awesome! .....
LOL!!!
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 10, 2012 11:28 AM
quote:
Keep in mind that Bazzaz connects and tunes off of both upper and lower injectors. Also takes into account throttle position,gear position and vehicle speed
That's Bazzaz support, they know what they are talking about. any questions Fastz14
PCV
wee
|
smokinZX14
Needs a life
Posts: 10197
|
posted April 10, 2012 12:38 PM
quote:
quote:
quote:
Keep in mind that Bazzaz connects and tunes off of both upper and lower injectors. Also takes into account throttle position,gear position and vehicle speed
Wow, it adds a set of injectors to the ZX-14!! That is awesome! .....
LOL!!!
LOL times 2 !!!
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Seno
Pro
BANNED FOR LIFE!
Posts: 1230
|
posted April 10, 2012 04:34 PM
Wow, support these days can be scary....
____________
2012 Black 14R -> Completely done!
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted April 10, 2012 04:47 PM
Their support team supports my previous statement...
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
LandSpeed
Parking Attendant
2012 ZX-14R / Blue
Posts: 18
|
posted April 10, 2012 08:48 PM
quote:
Keep in mind that Bazzaz connects and tunes off of both upper and lower injectors. Also takes into account throttle position,gear position and vehicle speed
I am sorry, but I would love to hear an explanation for this... 
____________
2012 ZX-14R - Candy Surf Blue
Brocks Polished AH2 Full System, Guhl's "Brocks" Flash 2, Alisyn 0W-20 w/Petron, Roaring Toyz Lowering Links, HyperPro RSC Damper, Brocks Front Strap Kit & Kickstand.
Running on E85.
|
FAST Z14
Expert Class
Posts: 184
|
posted April 11, 2012 02:30 AM
HeHe American humour, I think Bazzaz support was referring to the new Zx10 with 2 injector rails.
____________
FOLY HUCK
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted April 11, 2012 02:51 AM
Honestly, im hoping thats a joke
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Lucky14
Pro
Posts: 1439
|
posted April 11, 2012 03:47 AM
quote:
HeHe American humour, I think Bazzaz support was referring to the new Zx10 with 2 injector rails.
OK, that may be even worse.
Your original question was "We have Brock CT single full systems on order for our Zx 14R's, what would you guys recommend Bazzaz or PC 5."
1. Does Brock make a CT full system for the ZX-10r?
2. The question clearly states for ZX-14R.
3. The question was posted in the ZX-14.com forum.
What's the truth here? Was the question a setup? How did "Bazzaz Support" know that this thread existed, since he/she has only 1 post?
Hmmmmmmmmmmm..............
"
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
FAST Z14
Expert Class
Posts: 184
|
posted April 11, 2012 03:59 AM
I really don't know who Bazzaz Suport is I just asked a simple question what would you guys recommend, and Bazz answered, I just thought he might have thought the injectors was the same as the Zx 10, if he is really from Bazzaz suport he should jack up his knowledge on the 14, anyway I thought it was funny the way you guys creamed him for his mistake.
____________
FOLY HUCK
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted April 11, 2012 04:52 AM
quote:
I really don't know who Bazzaz Suport is I just asked a simple question what would you guys recommend, and Bazz answered, I just thought he might have thought the injectors was the same as the Zx 10, if he is really from Bazzaz suport he should jack up his knowledge on the 14, anyway I thought it was funny the way you guys creamed him for his mistake.
That wasn't a mistake, that was ignorance.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
mma-tv
Expert Class
Posts: 147
|
posted April 11, 2012 05:19 AM
Generic response to any bz vs pc question, im sure.
|
FAST Z14
Expert Class
Posts: 184
|
posted April 11, 2012 05:46 AM
eklipse636, I agree that was ignorance
____________
FOLY HUCK
|
Bazzaz Support
Parking Attendant
Posts: 10
|
posted April 11, 2012 09:31 AM
Ok, my mistake. Not very often you find that someone can admit when they are wrong. . I do apologize for that.
Good new though we will be getting the new ZX14 to do the R&D on. I will have the latest and greatest info. Mostly important the correct info.
____________
Bazzaz
Rich McGee
909-597-8300 X 107
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 11, 2012 11:34 AM
quote:
Ok, my mistake. Not very often you find that someone can admit when they are wrong. . I do apologize for that.
Good new though we will be getting the new ZX14 to do the R&D on. I will have the latest and greatest info. Mostly important the correct info.
any discount to Bikeland members?
wee
|
Seno
Pro
BANNED FOR LIFE!
Posts: 1230
|
posted April 11, 2012 12:04 PM
The saying "a day late & dollar short" comes to mind, I am guessing many people already went with the PCV due to availability alone. If you have not started your R&D yet how long till you have a "production model" available to the public? 2-3 months?
____________
2012 Black 14R -> Completely done!
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 11, 2012 12:59 PM
quote:
The saying "a day late & dollar short" comes to mind, I am guessing many people already went with the PCV due to availability alone. If you have not started your R&D yet how long till you have a "production model" available to the public? 2-3 months?
"next week"
wee
|
DynojetResearch
Parking Attendant
Posts: 8
|
posted April 12, 2012 09:34 AM
 Edited By: DynojetResearch on 12 Apr 2012 17:35
To answer the original question. The PCV has way more resolution than other fuel controllers. Theirs only give you a trim per gear while the PCV offers a separate map for each gear if desired. You could also have a separate map for each cylinder if desired.
If the ZX14 ever did grow another set of injectors we can adjust that too!!!
____________
Dynojet Tech team
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 12, 2012 11:50 AM
quote:
To answer the original question. The PCV has way more resolution than other fuel controllers. Theirs only give you a trim per gear while the PCV offers a separate map for each gear if desired. You could also have a separate map for each cylinder if desired.
If the ZX14 ever did grow another set of injectors we can adjust that too!!!
bet it takes you 6 months if they do. Then you will not distribute the pcv till you are ready... LOL sound familiar?
wee
|
|
|
HOME
NEW TOPIC