Viper
Expert Class
Posts: 285
|
posted April 03, 2012 11:36 AM
It may be a while til I have some money lol. Running a lil short right now
____________
2012 ZX14R SE
  
|
CajunBoyz
Zone Head
Posts: 702
|
posted April 03, 2012 12:46 PM
Anyone use the Map switch on just the PC-V??? Allows you to try a different map while TnT? Where do you hook the switch up to on the PC-V?
____________
"Cajun Boyz with Bad Ass Toys"
|
dogg24
Expert Class
Posts: 322
|
posted April 03, 2012 01:13 PM
 Edited By: dogg24 on 3 Apr 2012 21:13
quote:
Anyone use the Map switch on just the PC-V??? Allows you to try a different map while TnT? Where do you hook the switch up to on the PC-V?
There is a spot for the wire to go in on the pcv. If you pull up the link I posted you will see what I'm talking about.
____________
2012 ZX14R SE, Streetmeg, PCV
|
mma-tv
Expert Class
Posts: 147
|
posted April 03, 2012 05:17 PM
Will the PC do much for the new 14 with a pipe? The A/F didn't look too terrible on the dyno runs I saw, hovering right around 13:1. How much gain can be reasonably expected? Or is it going to improve drivability?
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 03, 2012 05:19 PM
quote:
Will the PC do much for the new 14 with a pipe? The A/F didn't look too terrible on the dyno runs I saw, hovering right around 13:1. How much gain can be reasonably expected? Or is it going to improve drivability?
gonna find out in a couple of days.
wee
|
Seno
Pro
BANNED FOR LIFE!
Posts: 1230
|
posted April 03, 2012 05:21 PM
WTF, my order still says pending....
____________
2012 Black 14R -> Completely done!
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 03, 2012 05:25 PM
quote:
WTF, my order still says pending....
hehe
wee
|
Lsantana954
Expert Class
Posts: 356
|
posted April 03, 2012 05:38 PM
quote:
Will the PC do much for the new 14 with a pipe? The A/F didn't look too terrible on the dyno runs I saw, hovering right around 13:1. How much gain can be reasonably expected? Or is it going to improve drivability?
Mine is scheduled to arrive tomorrow, im hoping to have it on the dyno on or by friday, same place i did my initial base line run.
____________
'12 Gully Blue ZX14
-PCV/Guhl ECU/Blue CT Meg/<0 Alyson Oil/+8 Evil Arm/+1 Rear Sprocket
'07 Acura TL-S
'87 Buick Grand National
|
Lucky14
Pro
Posts: 1439
|
posted April 03, 2012 05:52 PM
UPS says mine will be here Thurs.
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
mma-tv
Expert Class
Posts: 147
|
posted April 03, 2012 06:24 PM
Next week? ;-)
|
Lucky14
Pro
Posts: 1439
|
posted April 03, 2012 07:36 PM
quote:
Next week? ;-)
I should have it installed by ....................
Next week ..................
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
justoyz2
Zone Head
Justoyz Racing
Posts: 858
|
posted April 03, 2012 08:36 PM
I am sure you guys are incorrect on the connection is like the 2011 zx10. It connect on each injector..... the guy with the BSTs, CT all black bike which shave like 53 lbs on his bike (can't remember the name) either way you will see in a day or two
____________
2012 zx14R-blue,2012 zx14R-black, 2014 zx14Trbo, 2011 zx10R, 2007 zx10 Turbo.....
|
CajunBoyz
Zone Head
Posts: 702
|
posted April 03, 2012 11:03 PM
Edited By: CajunBoyz on 4 Apr 2012 09:28
quote:
I am sure you guys are incorrect on the connection is like the 2011 zx10. It connect on each injector..... the guy with the BSTs, CT all black bike which shave like 53 lbs on his bike (can't remember the name) either way you will see in a day or two
Not according to the 2012 ZX-14R PC-V instructions, shows one big plug, tap inot gear sensor & CPS, & grd.
http://www.powercommander.com/downloads/17-005/install/pcv/eng17-005.pdf
____________
"Cajun Boyz with Bad Ass Toys"
|
smokinZX14
Needs a life
Posts: 10197
|
posted April 04, 2012 05:42 AM
quote:
I am sure you guys are incorrect on the connection is like the 2011 zx10. It connect on each injector..... the guy with the BSTs, CT all black bike which shave like 53 lbs on his bike (can't remember the name) either way you will see in a day or two
That was Shane and he used a zx10 P/C ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Shane661
Needs a life
Posts: 11494
|
posted April 04, 2012 11:49 AM
The 14r unit does not piggyback onto the injectors.
|
cls
Expert Class
Posts: 410
|
posted April 04, 2012 11:57 AM
Holy crap! I just ordered mine from Brock's yesterday w/his street map already downloaded on it. It rolled up to the house today. Nice!
|
CraZX14
Expert Class
Posts: 399
|
posted April 04, 2012 12:02 PM
quote:
Holy crap! I just ordered mine from Brock's yesterday w/his street map already downloaded on it. It rolled up to the house today. Nice!
Way cool! Looks like your evening is "mapped out", Shane.... 
____________
2003 L.E. Hayabusa
|
cls
Expert Class
Posts: 410
|
posted April 04, 2012 01:14 PM
I wish Shane would come connect it.
|
smokinZX14
Needs a life
Posts: 10197
|
posted April 04, 2012 01:36 PM
Didn't get mine .. It was in a mercury spill at UPS in Jacksonville FL .. I may never get that one .... SUCKS !!!!!!!
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
pazx14rider
Zone Head
Posts: 953
|
posted April 04, 2012 01:50 PM
Ordered mine be here tomorrow...flys out race map installed
|
Lsantana954
Expert Class
Posts: 356
|
posted April 04, 2012 03:58 PM
got mines in today. will be installing it after work then off to the dyno in the morning.
____________
'12 Gully Blue ZX14
-PCV/Guhl ECU/Blue CT Meg/<0 Alyson Oil/+8 Evil Arm/+1 Rear Sprocket
'07 Acura TL-S
'87 Buick Grand National
|
Lucky14
Pro
Posts: 1439
|
posted April 04, 2012 04:08 PM
quote:
It has 1 large plug that connects behind the throttle bodies and a small 2 wire plug that connects to the crank sensor , 1 wire that splices into gear indicator and a ground. hooks up in minutes unless u have extremely huge hands
OK, I must have huge hands? 
I can see the plugs, but is there a trick to getting to them? Long tweezers? What????
Did you take off the upper fairing and the water bottle like the instructions say?
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
smokinZX14
Needs a life
Posts: 10197
|
posted April 04, 2012 04:15 PM
quote:
quote:
It has 1 large plug that connects behind the throttle bodies and a small 2 wire plug that connects to the crank sensor , 1 wire that splices into gear indicator and a ground. hooks up in minutes unless u have extremely huge hands
OK, I must have huge hands?
I can see the plugs, but is there a trick to getting to them? Long tweezers? What????
Did you take off the upper fairing and the water bottle like the instructions say?
For the big plug use a thin screw driver and stick it in the small SQ hole at the top of the plug . That tab is what hooks the plug together . Press down and at the same time pull the wiring harness toward you .. You may have to give a good little tug to pull it apart ... For the small plug for the crank pick up ... There is also a locking tab .. You will have to get you fingers up there and press the tab and with the other hand pull the wire untill in come lose .. They are both tricky little buggers ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
smokinZX14
Needs a life
Posts: 10197
|
posted April 04, 2012 04:19 PM
I always pull off the lower body work and the coolant bottle to get extra room to work .. I also take off the one bracket that holds the main wiring loom just to get extra room to work ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Lucky14
Pro
Posts: 1439
|
posted April 04, 2012 04:33 PM
THANKS, Smokin!!!
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
|
|
HOME
NEW TOPIC