cas15
Expert Class
Posts: 331
|
posted January 26, 2012 07:20 PM
went with ebay to cut the oil pan
So I send my oil pan out to get done in cali the guy takes for eva one month . Then when he finally answers my email he says he sent it out . A week later no oil pan. Finally I get the oil pan the guy sends it back with no return. So dissapointed in this guy now he doesn't answer my emails. Do I really need the return for the oil pan? I really want to put the bike together. Don't let this guy fool u too
   
|
1badzx12r
Needs a life
Posts: 8321
|
posted January 26, 2012 07:39 PM
 Edited By: 1badzx12r on 27 Jan 2012 03:41
was it this guy http://www.ebay.com/itm/KAWASAKI-NINJA-ZX-14-LOWERED-OIL-PAN-/180459198482?hash=item2a0434d812&item=180459198482&pt=Motorcycles_Parts_Accessories&vxp=mtr
he's got 100% feedback
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted January 26, 2012 07:41 PM
Why didn't you just get one from OSR? Didn't you ask us a while back about this oil pan?
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
dakota9498
Pro
Posts: 1181
|
posted January 26, 2012 07:45 PM
quote:
was it this guy http://www.ebay.com/itm/KAWASAKI-NINJA-ZX-14-LOWERED-OIL-PAN-/180459198482?hash=item2a0434d812&item=180459198482&pt=Motorcycles_Parts_Accessories&vxp=mtr
he's got 100% feedback
Same guy that does the revalved shocks, I had a good experience with that, however, I am with eklipse on this, you should have went with OSR for the pan. There is a thread on PB about an engine grenading with one of those pans, it seems that the clearances were not right with the pick up tube and it was starved of oil. OSR makes a proven product and customer service is top notch.
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted January 26, 2012 08:17 PM
Yup, sent mine to OSR and had it back 3 days later!
|
01smokes
Needs a job
Posts: 2243
|
posted January 27, 2012 03:39 AM
OSR did my pan they did awesome work and quick turn around.
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
kawpower
Zone Head
Mr kawasaki 2 you!
Posts: 887
|
posted January 27, 2012 05:51 AM
OSR!!!!!!!!!!
____________
Cecil County 2010 Motorcycle ET Champ. 9 Wins- 4 RUs .06zx14 turboed for 2012 .
|
01smokes
Needs a job
Posts: 2243
|
posted January 27, 2012 06:11 AM
Oh email me I have a extra stock one if You want it.
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
cas15
Expert Class
Posts: 331
|
posted January 27, 2012 06:25 AM
quote:
was it this guy http://www.ebay.com/itm/KAWASAKI-NINJA-ZX-14-LOWERED-OIL-PAN-/180459198482?hash=item2a0434d812&item=180459198482&pt=Motorcycles_Parts_Accessories&vxp=mtr
he's got 100% feedback
yup that's him . Service no good pan looks okay I geuss but I really don't know I it really should look
|
cas15
Expert Class
Posts: 331
|
posted January 27, 2012 06:41 AM
quote:
quote:
was it this guy http://www.ebay.com/itm/KAWASAKI-NINJA-ZX-14-LOWERED-OIL-PAN-/180459198482?hash=item2a0434d812&item=180459198482&pt=Motorcycles_Parts_Accessories&vxp=mtr
he's got 100% feedback
Same guy that does the revalved shocks, I had a good experience with that, however, I am with eklipse on this, you should have went with OSR for the pan. There is a thread on PB about an engine grenading with one of those pans, it seems that the clearances were not right with the pick up tube and it was starved of oil. OSR makes a proven product and customer service is top notch.
do u know the measurments so I could recheck it
|
cas15
Expert Class
Posts: 331
|
posted January 27, 2012 06:43 AM
quote:
Oh email me I have a extra stock one if You want it.
thanks I got the pan back it looks okay the thing is he didn't send me my return back do I really need the return hose
|
cas15
Expert Class
Posts: 331
|
posted January 27, 2012 06:46 AM
quote:
Why didn't you just get one from OSR? Didn't you ask us a while back about this oil pan?
I for got the company was change to osr. I should of check with u guys first lesson learn
|
01smokes
Needs a job
Posts: 2243
|
posted January 27, 2012 06:54 AM
quote:
quote:
Oh email me I have a extra stock one if You want it.
thanks I got the pan back it looks okay the thing is he didn't send me my return back do I really need the return hose
Are you talking about the rubber return hose that goes connected to the bottom of the motor? If so you will not wanna run that anyway. You will get way to much blow by with a cut pan. But I have one of them if you feel you need it.
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
dakota9498
Pro
Posts: 1181
|
posted January 27, 2012 07:40 AM
quote:
quote:
quote:
was it this guy http://www.ebay.com/itm/KAWASAKI-NINJA-ZX-14-LOWERED-OIL-PAN-/180459198482?hash=item2a0434d812&item=180459198482&pt=Motorcycles_Parts_Accessories&vxp=mtr
he's got 100% feedback
Same guy that does the revalved shocks, I had a good experience with that, however, I am with eklipse on this, you should have went with OSR for the pan. There is a thread on PB about an engine grenading with one of those pans, it seems that the clearances were not right with the pick up tube and it was starved of oil. OSR makes a proven product and customer service is top notch.
do u know the measurments so I could recheck it
It isn't a set measurement, it depends on how much taken out of the pan.
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
cas15
Expert Class
Posts: 331
|
posted January 27, 2012 07:54 AM
quote:
quote:
quote:
Oh email me I have a extra stock one if You want it.
thanks I got the pan back it looks okay the thing is he didn't send me my return back do I really need the return hose
Are you talking about the rubber return hose that goes connected to the bottom of the motor? If so you will not wanna run that anyway. You will get way to much blow by with a cut pan. But I have one of them if you feel you need it.
thanks so I don't need it better safe than sorry thanks
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted January 27, 2012 08:06 AM
quote:
quote:
quote:
Oh email me I have a extra stock one if You want it.
thanks I got the pan back it looks okay the thing is he didn't send me my return back do I really need the return hose
Are you talking about the rubber return hose that goes connected to the bottom of the motor? If so you will not wanna run that anyway. You will get way to much blow by with a cut pan. But I have one of them if you feel you need it.
Give shannon at OSR a call. If it were me, I would call him and see about sending the pan and pickup to him just to make sure it's right. Someone posted about their motor starving of oil with one of these pans.
I understand you don't want to put anymore money in it, but a couple extra $ at this point is better than a blown motor
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
cas15
Expert Class
Posts: 331
|
posted January 27, 2012 08:18 AM
quote:
quote:
quote:
quote:
was it this guy http://www.ebay.com/itm/KAWASAKI-NINJA-ZX-14-LOWERED-OIL-PAN-/180459198482?hash=item2a0434d812&item=180459198482&pt=Motorcycles_Parts_Accessories&vxp=mtr
he's got 100% feedback
Same guy that does the revalved shocks, I had a good experience with that, however, I am with eklipse on this, you should have went with OSR for the pan. There is a thread on PB about an engine grenading with one of those pans, it seems that the clearances were not right with the pick up tube and it was starved of oil. OSR makes a proven product and customer service is top notch.
do u know the measurments so I could recheck it
It isn't a set measurement, it depends on how much taken out of the pan.
oh okay thanks for the info
|
madnessracing
Pro
Vmax and Busa Beater
Posts: 1140
|
posted January 27, 2012 08:20 AM
I do oil pans too and I put the bolt on the side of the oil pan for the same price, Next time give get a hold of me ;-)
____________
Shorty's Performance
Team Madness Racing
|
cas15
Expert Class
Posts: 331
|
posted January 27, 2012 08:21 AM
quote:
quote:
quote:
quote:
Oh email me I have a extra stock one if You want it.
thanks I got the pan back it looks okay the thing is he didn't send me my return back do I really need the return hose
Are you talking about the rubber return hose that goes connected to the bottom of the motor? If so you will not wanna run that anyway. You will get way to much blow by with a cut pan. But I have one of them if you feel you need it.
Give shannon at OSR a call. If it were me, I would call him and see about sending the pan and pickup to him just to make sure it's right. Someone posted about their motor starving of oil with one of these pans.
I understand you don't want to put anymore money in it, but a couple extra $ at this point is better than a blown motor
u have a good point will do better safe than sorry thanks
|
smokinstorm
Zone Head
Old Drag Racer
Posts: 504
|
posted January 27, 2012 03:10 PM
OSR FTW on cut oil pans. Quick turnaround. He'll go to bat for you when and if the person installing the oil pan decides not to read the instructions he sends with it also. Please cut or remove the little rubber tube. Please.
____________
2009 Monster Edition ZX14
It's all stock I swear. Well...almost.
2005 Turbo Busa
2001 GSXR 1000
Looking for a 1985 GS1150E
|
dcjens
Pro
Wet side of Washington
Posts: 1059
|
posted January 27, 2012 05:31 PM
another OSR customer here, ebay is good for some things but not this one. save yourself some grief and go with BL vendors and members often as possible.
____________
Black 06
|
Seno
Pro
BANNED FOR LIFE!
Posts: 1230
|
posted January 28, 2012 02:44 AM
Well first part of the guys EBay name is appropriate... SLOWjavelin
____________
2012 Black 14R -> Completely done!
|
02zx12rbob
Expert Class
Posts: 496
|
posted January 29, 2012 09:10 AM
Waiting on my pan from OSR, should be here tommorow. Not positive, but I don't believe that tube is used after cut/modified.
|
|
|
HOME
NEW TOPIC