zxrider11
Novice Class
Posts: 81
|
posted January 17, 2012 04:40 PM
Help - PCIII question for my ZX14
Looking for some help here:
I have a 2008 ZX14, and found a used PCIII USB for sale - part # 224-410 that I want to buy.
I am getting a custom map made by a local tuner for my Akrapovic Evolution exhaust.
Does anyone know if this PC will work?
Called Dynojet Tech Support and they said that # 224 is designated for 2006-2007 ZX14's and it may work, but it is not the designated PC for the 2008. The designated 2008 PC is # 234.
Any help appreciated.
____________
2008 ZX14 Atomic Silver
2012 KTM 690 Enduro R
  
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 17, 2012 04:42 PM
 Edited By: Wheelie on 18 Jan 2012 00:43
http://www.brocksperformance.com/Dynojet-Power-Commander-III-USB+I922539+C223.aspx
$199
wee
|
Seno
Pro
BANNED FOR LIFE!
Posts: 1230
|
posted January 19, 2012 05:35 AM
Well according to Dynojet you need part number 234-411, PCV gives you a few more options, especially for a tuner... If you want the most out of your bike consider the PCV. Also the Akra is a good exhaust but realistically you're not going to gain more than 4-5 with a tune over the baseline Akra map on the powercommander site. Might as well save the $$$ and put it into something performance related like sprockets which is the best bang for the buck. Good luck!
Here is the link
http://www.powercommander.com/powercommander/powercommanders.aspx?mk=27&mdl=283&yr=2008&pc=17-012&mk-n=Kawasaki&mdl-n=ZX-14R&pc-ver=PCV&add-mdlyrid=17-012&add-mdlyrid2=17-012&fullstr=17-012
____________
2012 Black 14R -> Completely done!
|
fullthrottlekaw
Novice Class
Posts: 77
|
posted January 19, 2012 05:48 AM
i have a 08 zx14 and i purchased a pc3 off psychobike that was for the 06-07 so it was a diff part num still works the same but when you download a map it has to be for the pc3 at least when you download them off there website i couldnt download the 08 maps for my model pc3 works fine with the 06-07 map though
|
zxrider11
Novice Class
Posts: 81
|
posted January 19, 2012 07:43 AM
Thank you everyone for the help.
My tuner feels confident that this will work. He said no need for a PCV because I do not plan to run a 2nd map or air shifter.
I will post up how this all went and provide dyno #'s if everything goes well.
____________
2008 ZX14 Atomic Silver
2012 KTM 690 Enduro R
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted January 19, 2012 09:00 AM
Edited By: bigdtd on 19 Jan 2012 17:02
pclll will work fine good find wheelie
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
zxrider11
Novice Class
Posts: 81
|
posted January 27, 2012 09:20 AM
Update:
The Dynojet PCIII #224 worked on my 2008 ZX14.
Plan to bring the bike to my tuner for full custom map with my new Akrapovic Evolution exhaust.
Will follow up with dyno sheet hp numbers.
Thanks again for the help.
____________
2008 ZX14 Atomic Silver
2012 KTM 690 Enduro R
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted January 27, 2012 10:28 AM
I had the same question when I wrecked my 06 and bought a 08. I was told it would not work, no I sold it and bought the right one from Brock.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
rockhead
Parking Attendant
Posts: 3
|
posted February 04, 2012 01:22 PM
I just purchased a new 224-410 and yoshi pipes for my 2007 and Was creamed by a truck last month before I had a chance to install then. I did take them out of the package and was getting ready for the winter project. So they are not in the package. I now have a new 2011 14. I was told the 224-410 would not work on my 2011, and the yoshi will. Anybod know one way or the other if the PCIII will or will not. I do not see why not, same engine, pretty much. I want to install the pipes and a pc just to tune it to the pipes. Nothing dramatic, just hate the looks of the stock pipes. If does not I am will to let the pc go for really really really cheap price, just to help out a fellow rider. Not free mind you. just hate dealing with ebay or c-list.
|
|
|
HOME
NEW TOPIC