ZX14 Montana
Novice Class
Posts: 44
|
posted December 22, 2011 02:01 PM
What's your bottom line...
Looking for opinions...2012 14R, only mod is going to be exhaust, PCV, maybe an unleash/flash of ECU if needed? What exhaust type; Stainless or Titanium, 4 into 1 or other config.
Money is a small. If you were only doing these few mods, what exhaust would you use, ( I am looking at Brocks performance, and we are talking more for mid rpm to high rpm performance, rather than low to mid rpm performance. Thank you.
  
|
kaw now
Expert Class
Posts: 446
|
posted December 22, 2011 02:07 PM
Wait till someone designs one for the bike and someone has comparison data.
|
jarhead
Expert Class
Posts: 418
|
posted December 23, 2011 12:50 PM
I will tell you that my experience with the Muzzy's ss with oval can is a fantastic street/strip pipe. Great power/dollar, they are really a nice pipe. The Brock's are a fav amongst most of the guys on here, and I have owned a Brock's Sidewinder, they are a nice pipe but tend be a bit more pricey than the Muzzy's.
|
LAB3
Needs a job
Posts: 2977
|
posted December 23, 2011 01:51 PM
I had a Muzzy M14 with the stainless oval can, it made the same power as Brocks SMEG and seem to have a small advantage in lower RPM on my 2007. This new 14R will be different with the head and engine changes. I would wait a few months for Muzzy and all the others to do their R&D work before I purchased a new complete exhaust system. Brocks systems, maps and customer service is hard to beat. But very expensive.
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 23, 2011 02:10 PM
quote:
I had a Muzzy M14 with the stainless oval can, it made the same power as Brocks SMEG and seem to have a small advantage in lower RPM on my 2007. This new 14R will be different with the head and engine changes. I would wait a few months for Muzzy and all the others to do their R&D work before I purchased a new complete exhaust system. Brocks systems, maps and customer service is hard to beat. But very expensive.
That Muzzle makes very good hp on a 14r, and it's loud, but I had the radiator shimmed out almost a 1/2 inch, I probably didn't need to do it that far but it wasn't mine, and for $750 it's a bargain. Smokin said he used 1 washer to shim the Brocks smeg, it's loud, Brocks CT fits perfect but cost is high, not as loud as a smeg. Like LAB says you may want to wait till everything comes out for the 14r
wee
|
ZX14 Montana
Novice Class
Posts: 44
|
posted December 23, 2011 02:46 PM
Absolutely...waiting...thank you all.
|
joseph702
Zone Head
Posts: 598
|
posted December 23, 2011 04:27 PM
whats the 2ct worth used?
|
|
|
HOME
NEW TOPIC