KAWITOM
Expert Class
My 12R gone but not forgotten
Posts: 218
|
posted December 16, 2011 06:40 PM
Heading to the dyno tomorrow
Turn your back for a second and look what happens, LOL had to shim out the radiator a little no problem. Guess it's not new anymore, got over cutting the fairing.
____________
2012 ZX-14R SE
2002 VULCAN MEAN STREAK (11.41 @ 114 best 1/4)
I BLEED GREEN
  
|
smokinZX14
Needs a life
Posts: 10197
|
posted December 16, 2011 06:44 PM
Just remember the long arm and extra chain will cost you a bit of HP .. Just turn on that blue bottle and it's all good 
Bike looks Great !!!!!!!!
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
KAWITOM
Expert Class
My 12R gone but not forgotten
Posts: 218
|
posted December 16, 2011 06:49 PM
Thanks lee, I will say one thing that pipe is LOUD, didn't pay attention that the baffle was optional, one will be here Monday, the fit on this pipe was nice everything slid together nicely hardly any cutting on the fairing, its almost like somebody at Kawi knew that sidewinders would make it on to these bikes, how much hp you think I will can't be that much.
____________
2012 ZX-14R SE
2002 VULCAN MEAN STREAK (11.41 @ 114 best 1/4)
I BLEED GREEN
|
smokinZX14
Needs a life
Posts: 10197
|
posted December 16, 2011 06:56 PM
quote:
Thanks lee, I will say one thing that pipe is LOUD, didn't pay attention that the baffle was optional, one will be here Monday, the fit on this pipe was nice everything slid together nicely hardly any cutting on the fairing, its almost like somebody at Kawi knew that sidewinders would make it on to these bikes, how much hp you think I will can't be that much.
Maybe 2 hp ... Lube the snot out of the chain... Take a rag and pour a little Mobil one Syn oil on it and wipe the chain down with it ... It's a little messy when you hit 11k on the dyno but it will help offset the loss ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 16, 2011 06:56 PM
watching this one, hey KAWITOM, wired up my airshifter, works fine, thanks for the color codes on the ecu.
wee
|
codyc_13
Expert Class
Posts: 342
|
posted December 16, 2011 06:57 PM
Might wanna put your brake back on..... Haha, can't wait to see what it puts out.
____________
06 zx14, 65", lowered, muzzy pipe, pcIII, air shifter, Litz revalve, Adams cut seat, OSR cut pan 87 pump gas.
8.97 at 149mph
|
smokinZX14
Needs a life
Posts: 10197
|
posted December 16, 2011 06:57 PM
quote:
watching this one, hey KAWITOM, wired up my airshifter, works fine, thanks for the color codes on the ecu.
wee
I need a air shifter .. My foot is getting lazy ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 16, 2011 07:01 PM
quote:
quote:
watching this one, hey KAWITOM, wired up my airshifter, works fine, thanks for the color codes on the ecu.
wee
I need a air shifter .. My foot is getting lazy ...
Grainger, Ace Hardware, Hot Rod shop, and a couple of more stops you will have one lol
wee
|
KAWITOM
Expert Class
My 12R gone but not forgotten
Posts: 218
|
posted December 16, 2011 07:03 PM
No problem Wheelie glad I could help, Cody I want it to go faster not slow down! LOL
____________
2012 ZX-14R SE
2002 VULCAN MEAN STREAK (11.41 @ 114 best 1/4)
I BLEED GREEN
|
smokinZX14
Needs a life
Posts: 10197
|
posted December 16, 2011 07:06 PM
quote:
quote:
quote:
watching this one, hey KAWITOM, wired up my airshifter, works fine, thanks for the color codes on the ecu.
wee
I need a air shifter .. My foot is getting lazy ...
Grainger, Ace Hardware, Hot Rod shop, and a couple of more stops you will have one lol
wee
I know , i'm just done with running around buying this and that and putting it all together .. I just want to bolt it on and go riding .. Just send me yours .. You will not need it to out run 1bad anyway ..lol..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
KAWITOM
Expert Class
My 12R gone but not forgotten
Posts: 218
|
posted December 16, 2011 07:14 PM
That is my next project (air shifter) than the only thing left is the power commander when becomes available
____________
2012 ZX-14R SE
2002 VULCAN MEAN STREAK (11.41 @ 114 best 1/4)
I BLEED GREEN
|
KAWITOM
Expert Class
My 12R gone but not forgotten
Posts: 218
|
posted December 16, 2011 07:17 PM
By the way the exhaust weighs 10 lbs if anybody is interested, and if you race an NHRA there is contingency money, not that it is probably much of anything.
____________
2012 ZX-14R SE
2002 VULCAN MEAN STREAK (11.41 @ 114 best 1/4)
I BLEED GREEN
|
BLK ICE
Pro
we'll leave the light on for u
Posts: 1709
|
posted December 16, 2011 07:54 PM
Guys with older bikes usually run over new bikes because the old bikes have better chassis set-ups.
But not this time!
Nice build Kawitom.
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
|
Seno
Pro
BANNED FOR LIFE!
Posts: 1230
|
posted December 16, 2011 08:01 PM
Looks Great!
____________
2012 Black 14R -> Completely done!
|
indynic
Expert Class
Lil Show, Lil Go
Posts: 258
|
posted December 16, 2011 08:17 PM
quote:
quote:
quote:
watching this one, hey KAWITOM, wired up my airshifter, works fine, thanks for the color codes on the ecu.
wee
I need a air shifter .. My foot is getting lazy ...
Grainger, Ace Hardware, Hot Rod shop, and a couple of more stops you will have one lol
wee
Never Grainger!!!
|
CajunBoyz
Zone Head
Posts: 702
|
posted December 17, 2011 03:24 AM
quote:
watching this one, hey KAWITOM, wired up my airshifter, works fine, thanks for the color codes on the ecu.
wee
Wheelie where did you tapp into the coil wires at?? by the ECU harness? or at the coils? Which kill box are you using
____________
"Cajun Boyz with Bad Ass Toys"
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted December 17, 2011 03:47 AM
Looks very good Tom! can't wait to hear your numbers. call me when you have them!
|
justoyz2
Zone Head
Justoyz Racing
Posts: 858
|
posted December 17, 2011 07:52 AM
What happened to the dyno......
____________
2012 zx14R-blue,2012 zx14R-black, 2014 zx14Trbo, 2011 zx10R, 2007 zx10 Turbo.....
|
KAWITOM
Expert Class
My 12R gone but not forgotten
Posts: 218
|
posted December 17, 2011 08:03 AM
On my way in about ten minutes, of course it snowed last night, had to borrow an enclosed trailer, thought it was kind of silly to tow a thirty toy hauler to the other side of town, a tad bit overkill so I borrowed one from work. post up later with a video.
____________
2012 ZX-14R SE
2002 VULCAN MEAN STREAK (11.41 @ 114 best 1/4)
I BLEED GREEN
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 17, 2011 09:16 AM
quote:
quote:
watching this one, hey KAWITOM, wired up my airshifter, works fine, thanks for the color codes on the ecu.
wee
Wheelie where did you tapp into the coil wires at?? by the ECU harness? or at the coils? Which kill box are you using
soldered at the ecu harness, using a mps
wee
|
CajunBoyz
Zone Head
Posts: 702
|
posted December 17, 2011 10:29 AM
Thanks Wheelie....
____________
"Cajun Boyz with Bad Ass Toys"
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 17, 2011 11:26 AM
quote:
quote:
quote:
watching this one, hey KAWITOM, wired up my airshifter, works fine, thanks for the color codes on the ecu.
wee
Wheelie where did you tapp into the coil wires at?? by the ECU harness? or at the coils? Which kill box are you using
soldered at the ecu harness, using a mps
wee
#1 black
#2 black-red tracer
#3 black-orange tracer
#4 black-green tracer
wee
|
KAWITOM
Expert Class
My 12R gone but not forgotten
Posts: 218
|
posted December 17, 2011 02:49 PM
Well had some problems, gonna have to wait til my OEM brake hanger comes back from Adam's Performance they are using it to make a piece to work with their swingarm.
I used a gen 1 brake hanger, but the sensor was too far away from the rim, kept getting a code 24,27 and my speedo wasn't working. On the dyno it must have activated a limp mode or something was red lining at 10,000
Even so still hit 189.5 hp / 112 torq at 10,000 rpm's gonna get everything straight and go back to his shop again. This is at 67 1/2" wheelbase.
____________
2012 ZX-14R SE
2002 VULCAN MEAN STREAK (11.41 @ 114 best 1/4)
I BLEED GREEN
|
KAWITOM
Expert Class
My 12R gone but not forgotten
Posts: 218
|
posted December 17, 2011 03:05 PM
[URL=http://s1091.photobucket.com/albums/i399/kawitom/?action=view¤t=dyno004.mp4] [/URL]
Welcome to Hell's kitchen, my buddies building is big and part of it was an apartment, his dyno is setup in the old kitchen so the nickname fits LOL
____________
2012 ZX-14R SE
2002 VULCAN MEAN STREAK (11.41 @ 114 best 1/4)
I BLEED GREEN
|
KAWITOM
Expert Class
My 12R gone but not forgotten
Posts: 218
|
posted December 17, 2011 03:06 PM
This is supposed to be a video is there something I am doing wrong
____________
2012 ZX-14R SE
2002 VULCAN MEAN STREAK (11.41 @ 114 best 1/4)
I BLEED GREEN
|
|
|
HOME
NEW TOPIC