Shane661
Needs a life
Posts: 11494
|
posted December 21, 2011 05:27 PM
quote:
Installed Brocks CT, no shimming the radiator, fits like it should,. btw Lucky helped, Thank you very much, I owe you.
wee
Pics? 
  
|
Seno
Pro
BANNED FOR LIFE!
Posts: 1230
|
posted December 21, 2011 05:37 PM
CT is beautiful pipe! Pics??? Na I don't need no stinking pics, I'll just go look at mine in the garage!
BTW The keyhole on the under tail would irk me something awful...
____________
2012 Black 14R -> Completely done!
|
Shane661
Needs a life
Posts: 11494
|
posted December 21, 2011 05:39 PM
quote:
BTW The keyhole on the under tail would irk me something awful...
Ironic...it would not bother me a bit. Then again, I paint my race bodywork with rattle cans. 
Shane
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 21, 2011 05:40 PM
quote:
quote:
Installed Brocks CT, no shimming the radiator, fits like it should,. btw Lucky helped, Thank you very much, I owe you.
wee
Pics?
tomorrow,
wee
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 21, 2011 05:43 PM
The dimensions on the Muzzle vs Brocks CT will surprise ya'll
wee
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 21, 2011 05:50 PM
here you go Richcraft
wee
|
smokinZX14
Needs a life
Posts: 10197
|
posted December 21, 2011 06:01 PM
quote:
here you go Richcraft
wee
wow look at the size of that exhaust port ! ...that make the old zx14 look like a 600cc port ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Shane661
Needs a life
Posts: 11494
|
posted December 21, 2011 06:03 PM
quote:
quote:
here you go Richcraft
wee
wow look at the size of that exhaust port ! ...that make the old zx14 look like a 600cc port ..
That's what I was thinking!
|
smokinZX14
Needs a life
Posts: 10197
|
posted December 21, 2011 06:10 PM
quote:
quote:
quote:
here you go Richcraft
wee
wow look at the size of that exhaust port ! ...that make the old zx14 look like a 600cc port ..
That's what I was thinking!
You can see in the picture the CT flange is still smaller than the port .. I guess that is the 70 thousand Brock was talking about..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
87gtNOS
Zone Head
Posts: 620
|
posted December 21, 2011 06:10 PM
By the size of that exhaust port, is this an indicator that the previous head's ex port could use some opening up??
____________
01 ZX12R
07 ZX14 - YEAH BABY!
03 ZX9R-traded in for the 14!!! June 07!
05 636-traded in for the 9 Sept 05
|
smokinZX14
Needs a life
Posts: 10197
|
posted December 21, 2011 06:18 PM
 Edited By: smokinZX14 on 22 Dec 2011 02:24
I remember when i installed my CT on my 09 i could run my finger in the port and not feel where the flange ended and the port started .. very very good fit with the port ... On Wees port looks like you could feel it where it meets the head .. Maybe it's just the picture but it looks like you can see it ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 21, 2011 06:21 PM
quote:
I remember when i installed my CT on my 09 i could run my finger in the port and not feel where the flange ended and the port started .. very very good fit with the port ... On Wees port like like you could feel it where it meets the head .. Maybe it's just the picture but it looks like you can see it ..
that's where the headpipe stops when inserted, ??
wee
|
smokinZX14
Needs a life
Posts: 10197
|
posted December 21, 2011 06:23 PM
quote:
quote:
I remember when i installed my CT on my 09 i could run my finger in the port and not feel where the flange ended and the port started .. very very good fit with the port ... On Wees port like like you could feel it where it meets the head .. Maybe it's just the picture but it looks like you can see it ..
that's where the headpipe stops when inserted, ??
wee
No behind that point were the pipe slides in place ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Shane661
Needs a life
Posts: 11494
|
posted December 21, 2011 06:24 PM
To know the alignment precisely, the flange needs to be installed and bolted down.
Shane
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 21, 2011 06:25 PM
quote:
quote:
quote:
I remember when i installed my CT on my 09 i could run my finger in the port and not feel where the flange ended and the port started .. very very good fit with the port ... On Wees port like like you could feel it where it meets the head .. Maybe it's just the picture but it looks like you can see it ..
that's where the headpipe stops when inserted, ??
wee
No behind that point were the pipe slides in place ..
you sure that's not part of the pipe sleeve? Lucky can chime in when he gets home, he was poking around in there lol
wee
|
smokinZX14
Needs a life
Posts: 10197
|
posted December 21, 2011 06:28 PM
Edited By: smokinZX14 on 22 Dec 2011 02:31
quote:
To know the alignment precisely, the flange needs to be installed and bolted down.
Shane
When you get your Shane bolt it up tight and stick your finger all the way into the port and drag it out and see if you feel the flange .. On my 09 you could not feel it at all ..
I'll do the same when i get my new Alien 2..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
smokinZX14
Needs a life
Posts: 10197
|
posted December 21, 2011 06:36 PM
quote:
quote:
quote:
quote:
I remember when i installed my CT on my 09 i could run my finger in the port and not feel where the flange ended and the port started .. very very good fit with the port ... On Wees port like like you could feel it where it meets the head .. Maybe it's just the picture but it looks like you can see it ..
that's where the headpipe stops when inserted, ??
wee
No behind that point were the pipe slides in place ..
you sure that's not part of the pipe sleeve? Lucky can chime in when he gets home, he was poking around in there lol
wee
No Wee i'm looking past that point .. Looks to be a shadow around the sides and upper part of the flange ... Could be just the picture making it look that way .. Only way to tell is stick your finger in there and see if you feel it .
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 21, 2011 06:36 PM
quote:
quote:
quote:
quote:
quote:
I remember when i installed my CT on my 09 i could run my finger in the port and not feel where the flange ended and the port started .. very very good fit with the port ... On Wees port like like you could feel it where it meets the head .. Maybe it's just the picture but it looks like you can see it ..
that's where the headpipe stops when inserted, ??
wee
No behind that point were the pipe slides in place ..
you sure that's not part of the pipe sleeve? Lucky can chime in when he gets home, he was poking around in there lol
wee
No Wee i'm looking past that point .. Looks to be a shadow around the sides and upper part of the flange ... Could be just the picture making it look that way .. Only way to tell is stick your finger in there and see if you feel it .
Lucky will tell you shortly
wee
|
BLK ICE
Pro
we'll leave the light on for u
Posts: 1709
|
posted December 21, 2011 06:52 PM
quote:
here you go Richcraft
wee
Looks as if the zx14R is going to love a BIG shot of nitrous!
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
|
06redzx14
Pro
Posts: 1022
|
posted December 21, 2011 07:16 PM
Looks as if the zx14R is going to love a BIG shot of nitrous!
I'm thinking with a light weight rider, valve springs, and nos it'll go 7s stock motor
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot
|
SnuffyZX
Novice Class
Posts: 94
|
posted December 21, 2011 07:17 PM
Hey Wee
Which CT system did you install? Single or Dual CT's? Is the system updated for a 2012 or does the 06-11 fit without the radiator shimming? I have the Dual CT System that was on my 07 collecting dust down stairs and I'm happy to hear that you didnt have to shim the radiator.
Thanks
Snuffy
____________
2012 S.E. Golden Blazed Green 14R
Brocks CT Dual Exhaust
Brocks Ohlins Damper
Ohlins Rear Shock
MRA Touring Screen
DDM HID's
COX Radiator Guard
Power Bronze Tire Hugger
Clear Alternatives Intergrated Tailight
2007 Candy Plasma Blue (Retired)
|
Lucky14
Pro
Posts: 1439
|
posted December 21, 2011 08:02 PM
Edited By: Lucky14 on 22 Dec 2011 04:03
quote:
I remember when i installed my CT on my 09 i could run my finger in the port and not feel where the flange ended and the port started .. very very good fit with the port ... On Wees port looks like you could feel it where it meets the head .. Maybe it's just the picture but it looks like you can see it ..
It's just the pic. The inside ID of the flange is bigger than the exhaust gasket, so that's all that matters. The pipe that fits into the flange is maybe 3 or 4 thousands smaller than the flange, just a guess based on my fingertip micrometer.
quote:
To know the alignment precisely, the flange needs to be installed and bolted down.
Shane
Correct. I was holding the flange with a screwdriver and by holding it in place at the top of the port, the flange was slightly out at the bottom of the port.
My CT is still in the box so maybe I can get more detailed measurements when I install it.
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
BLK ICE
Pro
we'll leave the light on for u
Posts: 1709
|
posted December 21, 2011 08:36 PM
quote:
Looks as if the zx14R is going to love a BIG shot of nitrous!
I'm thinking with a light weight rider, valve springs, and nos it'll go 7s stock motor
2006-2007 stock motor and bodywork will go 7s...shhhhh
zx14r is going to go 7.6-7.5!
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
|
smokinZX14
Needs a life
Posts: 10197
|
posted December 21, 2011 09:45 PM
quote:
quote:
I remember when i installed my CT on my 09 i could run my finger in the port and not feel where the flange ended and the port started .. very very good fit with the port ... On Wees port looks like you could feel it where it meets the head .. Maybe it's just the picture but it looks like you can see it ..
It's just the pic. The inside ID of the flange is bigger than the exhaust gasket, so that's all that matters. The pipe that fits into the flange is maybe 3 or 4 thousands smaller than the flange, just a guess based on my fingertip micrometer.
quote:
To know the alignment precisely, the flange needs to be installed and bolted down.
Shane
Correct. I was holding the flange with a screwdriver and by holding it in place at the top of the port, the flange was slightly out at the bottom of the port.
My CT is still in the box so maybe I can get more detailed measurements when I install it.
Thanks Lucky .. Great info ..Now that you said that i noticed the screw driver holding the flange in place ...Pictures sometimes don't allway tell the hole story ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Brock
Sponsor
Posts: 560
|
posted December 21, 2011 10:21 PM
Edited By: Brock on 22 Dec 2011 06:28
quote:
here you go Richcraft
wee
Wee,
An 'anti reversion ridge' is intentional. I wish there was more of a mismatch to tell you the truth.
Lee - no. The Alien Head flange inserts inside of the headpipe. .070 smaller than the inlet of the new stock headpipe.
Brock
Www.BrocksPerformance.com
|
|
|
HOME
NEW TOPIC