edszx14
Expert Class
Posts: 271
|
posted August 07, 2011 02:32 PM
NOS mini controller wiring question
Hello. I am trying to wire up a NOS mini controller and don't understand exactly what the yellow (output) wire from the controller and the green wire (tach) from the controller actually get attached to. The instructions just state what the wire function is but not where to attach them.As anyone used this controller and how did you wire it up. I am only wiring up one nitrous solenoid and its driving me nuts. Any help is greatly appreciated.
____________
Ed
  
|
06redzx14
Pro
Posts: 1022
|
posted August 07, 2011 08:03 PM
The green wire is used for window switch when connected to the negative side of a coil. The yellow wire is a grounded output. I used it to switch maps when I was delaying my nos nos I use it to activate my timing retard.
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot
|
edszx14
Expert Class
Posts: 271
|
posted August 08, 2011 03:11 AM
Thanks for the info. Which wire (color and number ) on the ECU connector did you connect the yellow wire to..
Thanks again.
____________
Ed
|
06redzx14
Pro
Posts: 1022
|
posted August 08, 2011 05:36 AM
the yellow wire is to be connected to relays that trigger things like map switching or timing boxes
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot
|
edszx14
Expert Class
Posts: 271
|
posted August 08, 2011 04:47 PM
Cool. Thanks again for your help. It is greatly appreciated.
____________
Ed
|
|
|
HOME
NEW TOPIC