STULER
Novice Class
Back Road Racer
Posts: 31
|
posted August 05, 2011 01:27 AM
Installing a clutch kit
When installing a clutch kit, is doing it on a bike with a hydraulic clutch different from a cable clutch? if so, what steps are different when installing it?
____________
Ride like there's no tomorrow, because for all you know, there may not be one.
  
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted August 05, 2011 04:00 AM
Removing the clutch cover. Remember to not press the clutch handle while the cover is off.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
ninjaboy311
Zone Head
Posts: 940
|
posted August 05, 2011 09:28 AM
Keep track of the washer and needle bearings that go on the shaft when going back together with it.
____________
Naarden Speedlinks Sponsored Rider
Schnitz Racing Sponsored Rider
8.74 @ 152 on stock motor and MR9 (Muzzy Powered), 205 lbs suited
|
joel787
Zone Head
Posts: 590
|
posted August 05, 2011 09:55 AM
Tight the springs by hand those torque specs in the manual are bullshit
____________
http://www.proe-pr.com/cnc.html
|
|
|
HOME
NEW TOPIC