TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted February 03, 2011 06:32 PM
MPS Kill Thether Mounting Help...
Who out there is using an MPS tether kill switch?
I am trying to mount it to my bars and i can not figure it out. I have tried all combinations of moving the front brake, stock start/kill housing, and throttle housing. Nothing seems to be working for me. When i move everything around it looks like i need less than an 1/8th inch more clearance to have it fit so i can mount it on the bars.
Has anyone else ran into this problem? If so how did you take care of the issue?
The switch i have is this one...
http://www.mpsracing.com/products/MPS/hc01.asp
It says it is only 1/2" wide for easy installation. and i am still lost....
Thanks
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
  
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted February 03, 2011 06:39 PM
I had the same problem. I sold it and put a PMR switch on it. Cake
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted February 03, 2011 06:40 PM
lol... thats not what i wanted to hear.....
im looking into that currently.. I will wait and see if anyone else figured out a solution first, then i will go shopping again...ughhh
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted February 03, 2011 07:30 PM
You can cur part of the handle grip off and scoot one side of the stuff down to make it fit. I put mine on my right wrist, but wishes I would done my left wrist. It gets in the way of the throttle.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
BrucerZX14
Expert Class
Posts: 373
|
posted February 03, 2011 07:35 PM
quote:
You can cur part of the handle grip off and scoot one side of the stuff down to make it fit. I put mine on my right wrist, but wishes I would done my left wrist. It gets in the way of the throttle.
I hook mine to a zipper on my jacket. Keeps it away from the throttle.
|
TooHype
Expert Class
Go Hard or Go Home !!
Posts: 427
|
posted February 03, 2011 07:46 PM
quote:
I had the same problem. I sold it and put a PMR switch on it. Cake
+1
____________
Go Hard or Go Home !!....2007 Diablo Black ZX-14, BMC Race Filter, Brock's Alien Head, Brock's Radial Mount Strap, PClll with Custom Map, Flies removed, Muzzy fan, Muzzy lowering links, Muzzy Fender Eliminator, 16/41, Speedohealer, Stretched 6", Lowered 3" IN GOD I TRUST !......If You’re a Hater….KILLYASELF !!
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted February 04, 2011 02:24 AM
quote:
quote:
You can cur part of the handle grip off and scoot one side of the stuff down to make it fit. I put mine on my right wrist, but wishes I would done my left wrist. It gets in the way of the throttle.
I hook mine to a zipper on my jacket. Keeps it away from the throttle.
I have a vanson suit and it won't hook on the zipper. I guess I could put a keychain ring on it so it would...
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
SteddyTeddy
Pro
Posts: 1664
|
posted February 04, 2011 06:31 AM
The PMR switch is sweet and easy. I have one on my bike.
|
|
|
HOME
NEW TOPIC