smokinZX14
Needs a life
Posts: 10197
|
posted October 29, 2010 08:56 PM
5.58 in the 1/8 mile :)
Had my first ever 5.50 pass on 87 pump gas tonight .. 5.58 @ 125.36 ..
We had an all Bike Night at our local 1/4 mile track tonight .. Temps in the mid to high 70s , 54% humidity , DA 900 and change ... Not the best air but pretty damn good for FL this time of the year ..
Best run of the night
1.35 60 foot
3.63 330
5.58 @ 125.36 1/8 mile
7.29 @ 1000 feet
8.76 @ 156.76 1/4 mile
In the passed i have run 5.60 flat in good air but never busted into 5.50 on motor on pump gas ... We have another Bike Night coming up in late Dec and the air will even be better .. 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
  
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted October 29, 2010 09:17 PM
Very nice Lee. When did you extend your bike?
|
dakota9498
Pro
Posts: 1181
|
posted October 29, 2010 09:36 PM
Damn that's moving, Nice job.
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
smokinZX14
Needs a life
Posts: 10197
|
posted October 29, 2010 09:38 PM
 Edited By: smokinZX14 on 30 Oct 2010 05:40
quote:
Very nice Lee. When did you extend your bike?
About 3 weeks ago .. Since then i have trying to get the gearing right ..Started off with 17/41 but it was bogging .. Switched to 16/41 and that helped but it still has a small bog .Then i switched to 16/42 but still has a bit of a bog.. I'm thinking a 16/43 might be just right ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted October 30, 2010 02:30 AM
Smokin, those are tuff numbers to beat, shweeet!
wee
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted October 30, 2010 03:13 AM
Good numbers! How far did you stretch it?
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted October 30, 2010 03:23 AM
Nice!! Congrats!!!
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted October 30, 2010 04:15 AM
Nice! just think what it would have been with some MR12
|
smokinZX14
Needs a life
Posts: 10197
|
posted October 30, 2010 05:15 AM
quote:
Good numbers! How far did you stretch it?
I have never had a really long bike before , so i went for broke on this one ... It's just a cunt hair under 68 inches ... 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
smokinZX14
Needs a life
Posts: 10197
|
posted October 30, 2010 05:16 AM
quote:
Nice! just think what it would have been with some MR12
Ported head first Bently ... Then a 30 shot ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Lucky14
Pro
Posts: 1439
|
posted October 30, 2010 06:00 AM
Very good! 
Now on to the quest for the holy grail of a 1.2x 60.
Will you snatch it away as Wheelie reaches for it?
Oh, the suspense! 
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
CraigChrist
Pro
BAWLS
Posts: 1043
|
posted October 30, 2010 07:06 AM
Congrats lee, sounds like nooby is finally going to have some competition again.
____________
60ft-------1.42
1/8th------5.97
mph-------119
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted October 30, 2010 07:20 AM
I think nooby still has him by a few hundredths.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted October 30, 2010 08:29 AM
quote:
quote:
Nice! just think what it would have been with some MR12
Ported head first Bently ... Then a 30 shot ..
Cool 5.40's easy!
|
madnessracing
Pro
Vmax and Busa Beater
Posts: 1140
|
posted October 30, 2010 08:49 AM
That's bad ass Lee! I think you can do better cause I remember you saying you once went 1.32 60ft at 62'in! Now I can wait to see your ETs once you get used to the new set up!
____________
Shorty's Performance
Team Madness Racing
|
BLK ICE
Pro
we'll leave the light on for u
Posts: 1709
|
posted October 30, 2010 01:52 PM
Smokin,
Congrats. NICE PASS!
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
|
LeonidasZX14
Pro
Posts: 1277
|
posted October 30, 2010 05:44 PM
Nice job Lee!!!!
____________
09' ZX14
|
bbwatercool
Novice Class
Posts: 64
|
posted October 30, 2010 06:07 PM
quote:
Had my first ever 5.50 pass on 87 pump gas tonight .. 5.58 @ 125.36 ..
We had an all Bike Night at our local 1/4 mile track tonight .. Temps in the mid to high 70s , 54% humidity , DA 900 and change ... Not the best air but pretty damn good for FL this time of the year ..
Best run of the night
1.35 60 foot
3.63 330
5.58 @ 125.36 1/8 mile
7.29 @ 1000 feet
8.76 @ 156.76 1/4 mile
In the passed i have run 5.60 flat in good air but never busted into 5.50 on motor on pump gas ... We have another Bike Night coming up in late Dec and the air will even be better ..
Those are some nice numbers!! your back half mph is really good!!
____________
Cycle Concepts
1625 Lynwood Dr
Lancaster,SC 29720
803.285.8093
Home of the Drag Pak Clutch Pak!!
|
madnessracing
Pro
Vmax and Busa Beater
Posts: 1140
|
posted October 30, 2010 06:57 PM
Lee you should try race gas and see what happens!
____________
Shorty's Performance
Team Madness Racing
|
Black22
Novice Class
Posts: 32
|
posted October 30, 2010 07:29 PM
Has nobody been in the 1.20's (60ft) ?
____________
Amsoil
Shift FX biperformance.ca
Go-Pro Hero Cameras
|
Big_T112
Pro
Posts: 1061
|
posted October 31, 2010 07:02 AM
On my old GS dragbike with slick & wheely bars launching at 8500 rpm on the 2-step.
Smokin IS Smokin!
|
LeonidasZX14
Pro
Posts: 1277
|
posted October 31, 2010 07:37 AM
quote:
Has nobody been in the 1.20's (60ft) ?
1.20's are nearly impossible on a stock motored bike.
____________
09' ZX14
|
quick6
Expert Class
Posts: 257
|
posted October 31, 2010 10:12 AM
quote:
quote:
Has nobody been in the 1.20's (60ft) ?
1.20's are nearly impossible on a stock motored bike.
i wouldnt say that. maybe stock clutch bike, but a stock motor 14 could pull 1.20s with the right clutch set up i believe
____________
2006 zx14, fully dressed and sliding(Charlie Sheen)
|
quick6
Expert Class
Posts: 257
|
posted October 31, 2010 10:15 AM
btw, smoking great run. what do you weigh btw?that 60 is nice . one day i will be good enough to 60 like that.
____________
2006 zx14, fully dressed and sliding(Charlie Sheen)
|
LeonidasZX14
Pro
Posts: 1277
|
posted October 31, 2010 10:41 AM
Jesus Christ!!!!!!!!!!!!!!! 500 HP Turbo bikes 60' low 1.300-1.320 and the NOS Pro Street bikes 60' 1.280-1.300s with sliders. They have PERFECT clutch setups and a shit load of HP. So my comment of NEARLY impossible on a stock motor still stands. Please note the word nearly.
____________
09' ZX14
|
|
|
HOME
NEW TOPIC