Wheelie
Needs a life
Old Man
Posts: 6902
|
posted October 17, 2010 05:37 AM
BeeMW @ DRW
BeeMW was at the track, 149 mph, a couple of 150's, and a 154 mph, 9.60? I think, no way the guy could rev the bike and launch, the clutch would grab just like the Booza, needs a clutch mod unless you are Bently lol btw rider looked 140 lbs, with a clutch mod it should run pretty good and do more mph
wee
  
|
LAB3
Needs a job
Posts: 2977
|
posted October 17, 2010 05:42 AM
It's still a very small bike for "The Little People" 6'3" and a old back.............don't care if it ran 160 stock in 1/4 would not purchase one. Parts and Tech who knows what to do to one while in warranty..lol. needs a second matching head light :-)
Louis
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 17, 2010 05:44 AM
S 1000 RR Clutch Mod Kit
SKU: 270591
A Brock's Performance Clutch Mod is required for the BMW S 1000 RR to be launched smoothly from a dead stop! Brock’s Performance Clutch Mod disables the factory slipper clutch. This allows the rider to perform a smooth launch as opposed to the grab-n-jerk associated with trying to launch a stock machine from a dead stop. This kit includes shim spacers to slightly increase clutch pressure without causing chatter or a lack of top end speed. Brock Davidson Enterprises, Inc.
PRICE: $99.95
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
LAB3
Needs a job
Posts: 2977
|
posted October 17, 2010 05:59 AM
Hey Robert how is that Expensive Hays( I think) "Trick" clutch working out for you??????????? Wheelie has a miute for you........... funny post about 12 hour wait and 1 minute of racin.......... still Fishin at Shane's thread I see.
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 17, 2010 06:46 AM
i sold it
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
LAB3
Needs a job
Posts: 2977
|
posted October 17, 2010 06:50 AM
WHY????????????
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 17, 2010 06:57 AM
i couldn't get it to work for me
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted October 17, 2010 07:18 AM
quote:
BeeMW was at the track, 149 mph, a couple of 150's, and a 154 mph, 9.60? I think, no way the guy could rev the bike and launch, the clutch would grab just like the Booza, needs a clutch mod unless you are Bently lol btw rider looked 140 lbs, with a clutch mod it should run pretty good and do more mph
wee
Don't know about the bmw never rode one. but no clutch mod needed on the Busa!
|
LAB3
Needs a job
Posts: 2977
|
posted October 17, 2010 07:34 AM
quote:
i couldn't get it to work for me
What? And you are givin Shane a hard time about swapping parts around with no results??? I bet I would have NOT been able to figure it out either. Just sayin.........
Bored this mornin 1BAD???????? :-) stirin it up some. :-)
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 17, 2010 07:38 AM
 Edited By: 1badzx12r on 17 Oct 2010 15:48
quote:
quote:
What? And you are givin Shane a hard time about swapping parts around with no results???
I'VE got a result .. it didn't work for me .. it may work for you
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
LeonidasZX14
Pro
Posts: 1277
|
posted October 17, 2010 07:41 AM
I won't go into too many details but there was one at our local track on Friday night. The guy showed up with his BMW in a plexiglass trailer with some sort of black light or neons in it. They set up a table and started handing out Brock posters and had a BST wheel on display. I don't think that people get it, because boy oh boy were all the locals laughing hysterically. After listening to them tell me how much more power the BMW made than my bike I had to go show them what my little 14 could do and BTW I represented!
____________
09' ZX14
|
Lucky14
Pro
Posts: 1439
|
posted October 17, 2010 07:57 AM
quote:
I won't go into too many details..........
How about details of what times did the BMW run?
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 17, 2010 08:08 AM
Edited By: 1badzx12r on 17 Oct 2010 16:09
quote:
quote:
I won't go into too many details..........
How about details of what times did the BMW run?
"Detail" isn't that when you get ur bike cleaned
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted October 17, 2010 09:08 AM
quote:
I won't go into too many details but there was one at our local track on Friday night. The guy showed up with his BMW in a plexiglass trailer with some sort of black light or neons in it. They set up a table and started handing out Brock posters and had a BST wheel on display. I don't think that people get it, because boy oh boy were all the locals laughing hysterically. After listening to them tell me how much more power the BMW made than my bike I had to go show them what my little 14 could do and BTW I represented!
So did they run this bike or just display it.
|
LeonidasZX14
Pro
Posts: 1277
|
posted October 17, 2010 09:10 AM
quote:
quote:
I won't go into too many details but there was one at our local track on Friday night. The guy showed up with his BMW in a plexiglass trailer with some sort of black light or neons in it. They set up a table and started handing out Brock posters and had a BST wheel on display. I don't think that people get it, because boy oh boy were all the locals laughing hysterically. After listening to them tell me how much more power the BMW made than my bike I had to go show them what my little 14 could do and BTW I represented!
So did they run this bike or just display it.
They had one for show and ran the other.
____________
09' ZX14
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted October 17, 2010 09:21 AM
No times?
|
|
|
HOME
NEW TOPIC