NeverKnow
Novice Class
Posts: 79
|
posted September 05, 2010 07:36 PM
Clutch replacement
when should a clutch be replaced?
How many street miles of riding before the clutch needs to be replaced and how many runs when drag racing before the clutch needs to be replaced. what clutch parts require replacement?
  
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted September 05, 2010 08:13 PM
I wouldn't replace it til it goes out. There's not a certain amount of passes at the track you can get. It's all in riding technique. I've got 350+ passes on my clutch so far, I think I did it in sat. If I get time tomorrow I'm gonna take it apart and see how much damage I did.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
01smokes
Needs a job
Posts: 2243
|
posted September 05, 2010 08:42 PM
steels and fibers get a drag pack its a good clutch and cheap,
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
CraigChrist
Pro
BAWLS
Posts: 1043
|
posted September 06, 2010 05:56 AM
I change mine when I see a drop in mph or when my buddies can hear it trying to drive through them.
____________
60ft-------1.42
1/8th------5.97
mph-------119
|
NeverKnow
Novice Class
Posts: 79
|
posted September 12, 2010 04:24 AM
Thanks for the response. Where can I buy the dragpack?
|
Shane661
Needs a life
Posts: 11494
|
posted September 12, 2010 04:26 AM
You can cook one in 10 passes, or 500 passes. It depends on your technique.
If you have any doubt, remove it and measure the stack height and inspect the steels and fibers.
Usually you can get away with just replacing the fibers.
Shane
|
|
|
HOME
NEW TOPIC