3000psi and falling
Zone Head
Posts: 848
|
posted July 25, 2010 01:58 PM
coupling bearing
Mine started to get rough so im looking for a new one, anyone know of a place that has them? I checked local auto stores with no luck, I know the dealer will want a lot for this.
____________
08 ZX14, 2010 Persimmon Red bodywork.
Flies pulled, 16-42, BMC street, 8" extensions, drag shock, cut pan, Cycle Concepts Drag Pack and springs, muzzy m14 w/ oval can, lowered, Shinco usoft rear, pcv with autotune, leightweight Shori 18ah battery, throttle meister. 500lbs at bandimeres scales with half tank of juice.
  
|
3000psi and falling
Zone Head
Posts: 848
|
posted July 25, 2010 09:57 PM
Its the one in the sprocket hub. the open roller bearing..
____________
08 ZX14, 2010 Persimmon Red bodywork.
Flies pulled, 16-42, BMC street, 8" extensions, drag shock, cut pan, Cycle Concepts Drag Pack and springs, muzzy m14 w/ oval can, lowered, Shinco usoft rear, pcv with autotune, leightweight Shori 18ah battery, throttle meister. 500lbs at bandimeres scales with half tank of juice.
|
Compton
Zone Head
Posts: 969
|
posted July 26, 2010 03:10 AM
measure the ID and OD and go to any bearing shop
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14
|
Shane661
Needs a life
Posts: 11494
|
posted July 26, 2010 03:13 AM
 Edited By: Shane661 on 26 Jul 2010 11:13
http://www.ronayers.com/Search/N/687/PartNumber/601B6006G/Source/KA
Is this it? $13.53 from Ron Ayers...
Check the online Fiche to confirm...
|
Hellmutt
Needs a job
Posts: 2013
|
posted July 26, 2010 04:36 AM
Edited By: Hellmutt on 26 Jul 2010 12:37
http://www.motionindustries.com/
this is another good source for bearings
____________
British flying couch with endtables and an orange thumper
________________________________________________
|
3000psi and falling
Zone Head
Posts: 848
|
posted July 26, 2010 08:52 AM
quote:
http://www.ronayers.com/Search/N/687/PartNumber/601B6006G/Source/KA
Is this it? $13.53 from Ron Ayers...
Check the online Fiche to confirm...
It says 6006c6 on the bearing, Japan, NTN
____________
08 ZX14, 2010 Persimmon Red bodywork.
Flies pulled, 16-42, BMC street, 8" extensions, drag shock, cut pan, Cycle Concepts Drag Pack and springs, muzzy m14 w/ oval can, lowered, Shinco usoft rear, pcv with autotune, leightweight Shori 18ah battery, throttle meister. 500lbs at bandimeres scales with half tank of juice.
|
Shane661
Needs a life
Posts: 11494
|
posted July 26, 2010 08:58 AM
Edited By: Shane661 on 26 Jul 2010 16:59
quote:
quote:
http://www.ronayers.com/Search/N/687/PartNumber/601B6006G/Source/KA
Is this it? $13.53 from Ron Ayers...
Check the online Fiche to confirm...
It says 6006c6 on the bearing, Japan, NTN
Just curious...is it too much work to look it up at Ron Ayers?? I mean, I already did it once...Jesus. I mean, I like helping people...but at some point you need to help yourself. 
|
3000psi and falling
Zone Head
Posts: 848
|
posted July 26, 2010 09:37 AM
I did, I was saying the numbers didnt match up. Geeze man.. I ordered it anyways. Napa could also get it, but wanted 40.00 bucks for it.
Thanks for the Ron Ayers link, they seem to have great prices.
____________
08 ZX14, 2010 Persimmon Red bodywork.
Flies pulled, 16-42, BMC street, 8" extensions, drag shock, cut pan, Cycle Concepts Drag Pack and springs, muzzy m14 w/ oval can, lowered, Shinco usoft rear, pcv with autotune, leightweight Shori 18ah battery, throttle meister. 500lbs at bandimeres scales with half tank of juice.
|
Hellmutt
Needs a job
Posts: 2013
|
posted July 26, 2010 09:43 AM
You'll find that a lot of times that NTN and Timken bearings will not match part# to part#, but will actually be identical bearings.......just another curve the industry throws at the public to keep down on crossreferencing coupon clippers!!
____________
British flying couch with endtables and an orange thumper
________________________________________________
|
Quarter Pounder
Pro
with Cheese
Posts: 1069
|
posted July 26, 2010 02:39 PM
FYI...bearings have the same numbers on them...they are universal across the industry. The letters before or after might be different though and will need to be coded out.
____________
SWB 2008 ZX-14
9.19 @ 151
5.98 @ 123
1.53 60'
|
3000psi and falling
Zone Head
Posts: 848
|
posted July 26, 2010 04:33 PM
Thanks, Ive gone through a bearing 101 over the last day..lol
____________
08 ZX14, 2010 Persimmon Red bodywork.
Flies pulled, 16-42, BMC street, 8" extensions, drag shock, cut pan, Cycle Concepts Drag Pack and springs, muzzy m14 w/ oval can, lowered, Shinco usoft rear, pcv with autotune, leightweight Shori 18ah battery, throttle meister. 500lbs at bandimeres scales with half tank of juice.
|
|
|
|
|
HOME
NEW TOPIC