posted May 27, 2010 03:07 PM
gilberjj.well mr cocky keep explaining to me all your knowledge dumb ass.Keep explaining to me your wisdom and why this cant happen? Man your still stupid.Guess you wont have anything to say now.Im tired of schooling you on everything you post.THINK before you type and you wont look so stupid in from of the entire thread.
quote:gilberjj.well mr cocky keep explaining to me all your knowledge dumb ass.Keep explaining to me your wisdom and why this cant happen? Man your still stupid.Guess you wont have anything to say now.Im tired of schooling you on everything you post.THINK before you type and you wont look so stupid in from of the entire thread.
that would be "you're still stupid"
Like I said earlier, go bother Lyle for a bit. I've read your comments, and quite honestly I don't care.
posted May 27, 2010 03:29 PM
Chuck Norris managed to break a set of r1 wheels just picking it up, you better becareful.
____________
2006 Kawasaki ZX14, Muzzy Full Titanium Exhaust w/ Carbon Can, PCIII, BMC Street Filter
posted May 27, 2010 08:08 PM
Then come back and teach zx14fan about proper sentence structure, capitalization, and punctuation.
____________
60ft-------1.42
1/8th------5.97
mph-------119
posted May 28, 2010 01:25 AM
Given all of your ridiculous comments, that's all that you do. Maybe if you spent a little more time working on and riding the bike instead of reading about it, you wouldn't be so damn scared of everything that isn't done in a magazine or instruction manual.
____________
60ft-------1.42
1/8th------5.97
mph-------119
posted May 28, 2010 02:19 AM
Zx14fan, since your" schooling" people here, how much hp did your spark plug test pick up???
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
posted May 28, 2010 11:02 AM
From searching on goallballs.com (all ball bearings website), I found that the front and rear bearings are different. I also found that the 07 r1 shares its front bearings with the 06 le, so I believe that means it's a 22mm axle. So here's the big money question now.
Do I make a 3mm sleeve to make it the same size as the zx14 axle?
Do I modify the bearings to fit the larger zx14 axle?
Do I modify the zx14 axle to fit into the r1 wheels?
Totally custom axle? $$$$$$
posted May 28, 2010 11:23 AM
Easiest would be changing the bearings, and making the proper spacers.
The horizontal rotor spacing/width is a very big issue. You can only space the rotors out wider (not narrower), and you can't do much due to the centering rings on the wheel.
posted May 28, 2010 01:17 PM
eklipse636 Im going to post a one test with 5 different kinds of plugs.My dyno man here up north thought it might be worth a try to see what could happen.The results are not done till next week because the last set of plugs have not come in yet. my dyno man was a little suprised by one set of plugs though not a huge gain it was worth noting.Im not going to post what he found except the stock plugs since a few like you, gilberjj and smokin who I had some respect for at one time were to cocky and couldnt answer my question you ran your mouth.You can do the dyno work yourself.There is a difference as I thought though not a huge gain, for you drag guys its enough to make a small gain.
posted May 28, 2010 08:05 PM
I would be happiest if you hung yourself from the shower rod... In the end, that would be the biggest gain that we would be able to see from your tests anyway.
____________
60ft-------1.42
1/8th------5.97
mph-------119
posted May 29, 2010 04:12 PM
Craig bawless dont hate cause you ran that huge mouth of yours and could not answer the plug thread lol.You didnt know something thats ok dont hate.I did my work now i know and you dont. sucks dont it.
posted May 29, 2010 05:44 PM
Zx14fan, is your wife doing these test for you since she obviously has the brains in your house?
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
posted May 29, 2010 07:38 PM
I actually didn't have the pleasure of being around for the spark plug thread. Damn deployment!
BTW, anytime you want to enlist and see if you can make it through our program you're more than welcome to see who's bawless...
____________
60ft-------1.42
1/8th------5.97
mph-------119
posted May 29, 2010 10:06 PM
Bawless You have no idea how hard I work out or the amount of miles I cycle in a week.I will trade pics of your mudd runs for what i do in A week right now??With the 26.2 miles I will run sunday morning,your in my back yard when it comes to training and I respect that so just drop it for once.
posted May 29, 2010 11:18 PM
I haven't been responding because you're cluttering my thread. Take it to the smackhouse. There you can squawk like a chicken and I don't have to read it.
posted May 30, 2010 04:00 AM
Gilberjj, he would never last in the smakhouse. They would eat him for breakfast...
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
posted June 08, 2010 04:16 PM
Edited By: gilberjj on 9 Jun 2010 00:17
I give up. I'm putting a turbo on the bike, and I think I'll have a hard enough time keeping the front end down without taking off my fright train stock wheels. I threw the wheels up on ebay if anyone is interested.
If someone is interested in seeing this thing through I will hook them up.
HOME
NEW TOPIC
posted May 27, 2010 03:07 PM
Edited By: 
