LeonidasZX14
Pro
Posts: 1277
|
posted May 21, 2010 02:59 PM
8.42 @161 on a stock Busa
Just read over on PB that Teasly ran an 8.42 @ 161 on a 66" stock motor Busa. Now that is impressive and certainly believable. His 60ft was 1.32 with a stock clutch...................DAMN!!!!!
____________
09' ZX14
  
|
smokinZX14
Needs a life
Posts: 10197
|
posted May 21, 2010 03:09 PM
quote:
Just read over on PB that Teasly ran an 8.42 @ 161 on a 66" stock motor Busa. Now that is impressive and certainly believable. His 60ft was 1.32 with a stock clutch...................DAMN!!!!!
Put JT on your zx14 and he will go 8.40s ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Shane661
Needs a life
Posts: 11494
|
posted May 21, 2010 03:09 PM
 Edited By: Shane661 on 21 May 2010 23:12
Hmm...will the BMW answer the call? What was the actual wheelbase on the BMW? 9" over...what is a Busa at when 9" over??
|
smokinZX14
Needs a life
Posts: 10197
|
posted May 21, 2010 03:11 PM
Little Nicks first pass ever on a 64 inch zx14 he ran 8.67 and that was on pump gas ., stock motor .
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
smokinZX14
Needs a life
Posts: 10197
|
posted May 21, 2010 03:12 PM
quote:
Hmm...will the BMW answer the call?
After 5 or 6 clutches ... Sure .. 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
smokinZX14
Needs a life
Posts: 10197
|
posted May 21, 2010 03:15 PM
One thing for sure a Vmax will not do that ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
LeonidasZX14
Pro
Posts: 1277
|
posted May 21, 2010 03:27 PM
He is a stud for sure. I would love to let him make a pass on my bike to see what he could do.
____________
09' ZX14
|
osti33
Needs a job
Posts: 2973
|
posted May 21, 2010 03:29 PM
quote:
I would love to let him make a pass on my bike to see what he could do.
+1
You and everyone else. He is a hell of a rider for sure.
|
Shane661
Needs a life
Posts: 11494
|
posted May 21, 2010 03:32 PM
quote:
He is a stud for sure. I would love to let him make a pass on my bike to see what he could do.
I'm very tempted to let Rickey Grayson run mine! I see him all of the time at MIR.
|
osti33
Needs a job
Posts: 2973
|
posted May 21, 2010 03:34 PM
quote:
quote:
He is a stud for sure. I would love to let him make a pass on my bike to see what he could do.
I'm very tempted to let Rickey Grayson run mine! I see him all of the time at MIR.
Another VERY good rider. That guy can ride the wheels off of just about anything.
|
1badzx12r
Needs a life
Posts: 8321
|
posted May 21, 2010 03:50 PM
quote:
quote:
Hmm...will the BMW answer the call?
After 5 or 6 clutches ... Sure ..
and at 500.00 a clutch set ..
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted May 21, 2010 05:30 PM
Jeremy teasley is a very good rider, just a little on the arrogant side.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
BrooklynNYZX12
Zone Head
Posts: 520
|
posted May 21, 2010 05:50 PM
I've seen Eddie Krawiec the V & H Pro Stock Rider rip off low 8.80's on 2 different 06 ZX14's one right after the other,they were both 61" if memeory serves me correct. No practice runs,just hopped on and layed the #'s down. This was @ E-Town when the 14's 1st came out.
____________
Orient Express Top Street Bike Winner 8-4-07
|
1badzx12r
Needs a life
Posts: 8321
|
posted May 21, 2010 06:15 PM
Edited By: 1badzx12r on 22 May 2010 02:15
quote:
, just a little on the arrogant side.
surprized.. thats most drag racers or racers ..
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
CraigChrist
Pro
BAWLS
Posts: 1043
|
posted May 21, 2010 06:46 PM
you should come to my track then... we're all so slow that there's no need to be arrogant :P
____________
60ft-------1.42
1/8th------5.97
mph-------119
|
CraigChrist
Pro
BAWLS
Posts: 1043
|
posted May 21, 2010 06:48 PM
BTW, what do they consider stock motored... with an 8.42, he must have been spraying the fucking house down.
____________
60ft-------1.42
1/8th------5.97
mph-------119
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted May 21, 2010 07:19 PM
quote:
BTW, what do they consider stock motored... with an 8.42, he must have been spraying the fucking house down.
No need for spray when you weigh 110 lbs 8.40's for jt on either a Busa or 14 are very easy. that's why I never commented in the bmw thread because both the 14 and Busa can do that. only thing is the bmw does it with less cc's and weight
|
06redzx14
Pro
Posts: 1022
|
posted May 21, 2010 07:32 PM
Don't leave out that the bike only weighed 465
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot
|
06redzx14
Pro
Posts: 1022
|
posted May 21, 2010 07:35 PM
485 sorry
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot
|
CraigChrist
Pro
BAWLS
Posts: 1043
|
posted May 21, 2010 08:00 PM
Does it really matter if it has less CC's if the horsepower to weigh ratio is better? I mean shit, 200hp is 200hp.
____________
60ft-------1.42
1/8th------5.97
mph-------119
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted May 21, 2010 11:48 PM
Shane, hurry up and let Gadson run your bike already!
|
LeonidasZX14
Pro
Posts: 1277
|
posted May 22, 2010 03:52 AM
quote:
BTW, what do they consider stock motored... with an 8.42, he must have been spraying the fucking house down.
Stock motor no spray running MR12. The mph is too low for him spraying the house down.
____________
09' ZX14
|
CraigChrist
Pro
BAWLS
Posts: 1043
|
posted May 22, 2010 04:47 AM
the only way that I can see anyone running 161 mph on mr12 is if they have other than a stock engine, AND disney land air. You have to be putting down over 200hp to run those numbers on a busa, and that shit isn't happening without either going into the engine or spraying. hell, you guys run on what seem to be the fastest tracks in the country and are the exception to the rule when it comes to times run on stock motored zx14's and you're not laying down those types of numbers. I'm sorry, but 5 hundredths better 60ft and 20 lbs less doesnt add up for the time and mph.
BTW, does anyone know what times Nightmare was putting down with his 14 on spray? because he's barely bigger than JT and putting down the same 60fts.
Call me a naysayer... but I would like to think I'm just not as gullible as most.
____________
60ft-------1.42
1/8th------5.97
mph-------119
|
Shane661
Needs a life
Posts: 11494
|
posted May 22, 2010 05:12 AM
Edited By: Shane661 on 22 May 2010 13:14
Believable #'s, with such a small jockey, and the relatively light weight. 
I believe that Brock's 08 Busa went an 8.59@159.xx before, on MR9, at 64", on a 1.39. I have the ticket somewhere....
Seems like the MR12 is working well.
Shane
|
Shane661
Needs a life
Posts: 11494
|
posted May 22, 2010 05:23 AM
Edited By: Shane661 on 22 May 2010 13:24
quote:
Shane, hurry up and let Gadson run your bike already!
Rickey Grayson is the grudge racer I was referring to. I'm not sure if he would be able to equal the #'s of these long bikes....I'm not sure if I am leaving my wheelbase where it is.
I know my bike is a lot lighter than 485 lbs., though.
|
|
|
HOME
NEW TOPIC