cbx1260cc
Novice Class
Posts: 52
|
posted April 21, 2010 03:42 AM
Seat mods
I've bought a used seat and have an old Corbin backrest.
Here's the plan.
Take the used seat and backrest to a local upholsterer and have a custom seat made that incorporates the backrest like the stock Corbin lady and gunfighter with backrest but for hopefully much less $$$. To do that though I need to have some ideas as to how a Corbin pan looks on the UNDERSIDE to figure how to incorporate the backrest.
Can someone who has a Corbin seat with backrest send me a few pix? Need some with the seat on the bike and backrest in place showing passenger area and then back of seat then additional ones with seat removed and underside showing backrest mounts etc.
Realise this is asking quite a bit but would appreciate the help from anyone who might be able to help.
Please send any advice/pictures to me at ricardosawyer@bellsouth.net
Sincere thanks in advance,
Ricardo
  
|
Hellmutt
Needs a job
Posts: 2013
|
posted April 22, 2010 02:51 AM
Sorry cbx......I've never experimented with anything like this, but there is Engineering Brain Power-o-plenty here -- I'm sure somebody could come up with something safe and sweet
____________
British flying couch with endtables and an orange thumper
________________________________________________
|
Lucky14
Pro
Posts: 1439
|
posted April 22, 2010 04:26 AM
No Corbin here, but maybe this will get you started (from Corbin's site).
Also, there are many other pics at corbin.com.
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
INTIMIDA2OR
Needs a life
RED rider!
Posts: 13081
|
posted April 22, 2010 11:26 PM
____________
'06 Passion Red ZX-14
*Lee*
|
|
|
HOME
NEW TOPIC