CraigChrist
Pro
BAWLS
Posts: 1043
|
posted March 26, 2010 06:05 PM
Who has a long bike that hooks on the street?
I know for a fact that Myself, TNT, and Dakota9498 can't get any traction on the street. Neither can any of the busas that I ride with that are stretched. So... Let's hear it. Who can run up through the RPM's in 1st through 3rd without blowing the tire off? Smokes claims that his bike does, and I know that madness does some street racing but i'm pretty sure that it's on a prepped street.
____________
60ft-------1.42
1/8th------5.97
mph-------119
  
|
smokinZX14
Needs a life
Posts: 10197
|
posted March 26, 2010 06:13 PM
I can hook but i have to slide the hell out of the clutch .. It also help if i granny shift 1 to 2 .. That was at 62 inches by the way .. They are not fast passes for sure ... Doesn't matter as long as i'm faster that the other guy ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
01smokes
Needs a job
Posts: 2243
|
posted March 26, 2010 06:13 PM
quote:
I know for a fact that Myself, TNT, and Dakota9498 can't get any traction on the street. Neither can any of the busas that I ride with that are stretched. So... Let's hear it. Who can run up through the RPM's in 1st through 3rd without blowing the tire off? Smokes claims that his bike does, and I know that madness does some street racing but i'm pretty sure that it's on a prepped street.
ill get you some video of a un prepped street with me launching and the front tire in the air the bike is 61" -1 gearing slammed in the dirt and its turboed anyone think i can do it???
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
smokinZX14
Needs a life
Posts: 10197
|
posted March 26, 2010 06:15 PM
quote:
quote:
I know for a fact that Myself, TNT, and Dakota9498 can't get any traction on the street. Neither can any of the busas that I ride with that are stretched. So... Let's hear it. Who can run up through the RPM's in 1st through 3rd without blowing the tire off? Smokes claims that his bike does, and I know that madness does some street racing but i'm pretty sure that it's on a prepped street.
ill get you some video of a un prepped street with me launching and the front tire in the air the bike is 61" -1 gearing slammed in the dirt and its turboed anyone think i can do it???
Well 61 inches is pretty short ...I think it could happen ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
dakota9498
Pro
Posts: 1181
|
posted March 26, 2010 06:31 PM
 Edited By: dakota9498 on 27 Mar 2010 02:31
I am running around 67 inches with stock gearing and don't hook with a damn. But I am running a regular shinko 003 and have never played around with air pressure on the street. And I definitely don't do any drag racing on the street here, I just got a ticket for a small (6") power wheelie and it is costing me $446, so that is enough.
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
The Red Rebel
Novice Class
Grip it, Twist it, Lean it....
Posts: 37
|
posted March 26, 2010 06:33 PM
hey...how about buying some track bite...That should work...lol
|
01smokes
Needs a job
Posts: 2243
|
posted March 26, 2010 06:40 PM
watch this video its not from a dig but about a 45 roll the bike hooks im on a 003 u soft as well its at 52 seconds in the video
http://www.youtube.com/watch?v=aBh6Y0bon58
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
01smokes
Needs a job
Posts: 2243
|
posted March 26, 2010 06:41 PM
the full video will be up in a few days this is just a teaser vid
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
CraigChrist
Pro
BAWLS
Posts: 1043
|
posted March 26, 2010 07:14 PM
i'm 16/46 and even with 12 psi in my u-soft If I grab a hand full of throttle in 1st gear from a roll it'll spin until I shift, go about 500rpm, spin again, and then the same in 3rd. I can slide the clutch enough to get it off the line, but as soon as it gets into the upper rpms it just wants to spin. To think that you can hook on the street with 250hp even with the high gearing you're running just boggles my mind. I'm a firm believer that if you're going to run on the street, Stock wheelbase is the way to go.
____________
60ft-------1.42
1/8th------5.97
mph-------119
|
biker
Expert Class
HU$TLER
Posts: 165
|
posted March 26, 2010 07:35 PM
LOL... My first 14 was 10" over and slammed,she went great straight @ 200mph and looked GREAT, but sucked ass for hook up. She would spin the rear @ 75mph when I nailed it everytime. And she turned like a stuffed pig too. Thats why I am leaving my current 14 @ stock length.
My friend had one 7" over and still spun...
____________
SEIZED...REBUILDING HOT ROD TIME
|
LOCK 2121
Expert Class
Posts: 160
|
posted March 26, 2010 11:30 PM
Quit slaming the clutch out , just snap it open , all that spinning wastes 1st gear you need that first 80 miles an hour , let every body elese spin, maybe that shinko crap isn't working after all??
|
LOCK 2121
Expert Class
Posts: 160
|
posted March 26, 2010 11:38 PM
Some times when a ZX14 cough's and stumble's when it clears out a 6" wheele is common !
|
kawboy81
Expert Class
Busa Eater
Posts: 273
|
posted March 27, 2010 09:14 AM
Is anyone doing anything with the chain guard bracket? I was gonna shorten mine up on the extensions but the beaker for the chain guard is in the way. Rubs tire.
____________
07 LE bolt on bike
|
CraigChrist
Pro
BAWLS
Posts: 1043
|
posted March 27, 2010 02:55 PM
Dremel it off
____________
60ft-------1.42
1/8th------5.97
mph-------119
|
LLcooljebb
Expert Class
Upgrade I Must
Posts: 146
|
posted March 27, 2010 08:27 PM
+1
____________
"no time to be void or save up on life
you got to spend it all.."
|
|
|
HOME
NEW TOPIC