blackmamba
Expert Class
Posts: 146
|
posted February 14, 2010 01:10 PM
Ground cable on PC3
Where are you guys bolting the ground cable that comes off the harness on the PC3. Instructions don't mention where to bolt that down to.
Thanks,
Abe
____________
www.packleader.org
  
|
kawasakijockey
Pro
Posts: 1876
|
posted February 14, 2010 01:12 PM
Run it to the battery ground.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost
|
Compton
Zone Head
Posts: 969
|
posted February 14, 2010 01:26 PM
i made up a 12 gauge wire from the ground on the battery to the over flow. cut the over flow so its only being held up by two bolts and used the third as a dedicated ground for it.
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted February 14, 2010 02:15 PM
I mounted my pcIII under the seat, and pulled the engine harness across to the clutch side. In doing that, I was able to connect the ground to the negative terminal on the battery. That's the best way to do it imo. It's a PITA but it's the best way.
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted February 14, 2010 02:21 PM
quote:
I mounted my pcIII under the seat, and pulled the engine harness across to the clutch side. In doing that, I was able to connect the ground to the negative terminal on the battery. That's the best way to do it imo. It's a PITA but it's the best way.
+1
it's not easy getting it ran unde the seat but well worth every min. If you ever want to change maps it's as easy as taking your seat off!
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Compton
Zone Head
Posts: 969
|
posted February 14, 2010 03:12 PM
Or run it up front and just run a usb cable to the back. Makes maps easy too
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14
|
Quarter Pounder
Pro
with Cheese
Posts: 1069
|
posted February 15, 2010 02:45 PM
quote:
I mounted my pcIII under the seat, and pulled the engine harness across to the clutch side. In doing that, I was able to connect the ground to the negative terminal on the battery. That's the best way to do it imo. It's a PITA but it's the best way.
yep, I had mine in the front left cowling, but recently moved it under the seat. Much better access.
____________
SWB 2008 ZX-14
9.19 @ 151
5.98 @ 123
1.53 60'
|
SteveWFL
Moderator
Posts: 27920
|
posted February 15, 2010 03:35 PM
if you like pain, mount it to the water bottle bolt per the directions that came with mine in '06 
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
Newf14
Zone Head
2007 ZX1400
Posts: 563
|
posted February 15, 2010 04:19 PM
I have the ground under the coolant bottle than I spliced in a wire and ran it accross to the negative post on the frame. I also pur my PC3 and speedo healer under my seat as well worth the trouble.
Newf14
|
|
|
HOME
NEW TOPIC