Halvefast
Zone Head
Posts: 806
|
posted January 09, 2010 10:52 PM
How high can you go??
Some one has to have explored the heights you can rev a stock bore and stroke ZX14?
Who has raised their limiter, how much can the stk rods take? 12Krpm? higher?
Thanks for any help!
____________
Texas Mile 200.256mph - Oct. 2007 (Update 202.577mph Oct 2008) NOS assisted
ECTA Ohio Mile 195.132mph
TexasMile 2012 199.9 mph all motor!
Streetriders Shootout 2008 series Pro/ET Champ!
Streetriders Shootout 2007 Series Pro/ET Runner-up!
   
|
SixSixoh6
Zone Head
Posts: 660
|
posted January 10, 2010 07:53 AM
curious to know the limits of this engine as well
____________
2006 ZX-14: Murdered out, in the dirt, extended, sprayed, air shifted, geared--GONE
2009 ZX-14 SE--has two wheels and an engine
|
BLK ICE
Pro
we'll leave the light on for u
Posts: 1709
|
posted January 10, 2010 03:11 PM
 Edited By: BLK ICE on 10 Jan 2010 23:12
I read on Brock's site that most modern sportsbike can handle about+500 rpm. But he did not say anything about the zx14 only. A Pro tuner told me that they went +1000 using a dyno jet ignition on a 07 zx14 with less than 200miles on it and it throw out a stock vavle sham.
RR can do it through the zx14 ecu now but I haven't heard any preformance result.
I am very curiuos to know the engine limits (stock vavle springs and double vavle springs), preformance gains, how a 40shot dry shot would effect it, how gearing whould be effected, and can the ZX14 be map to continue to make power beyond the stock limiter in all gears?
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted January 10, 2010 03:35 PM
I'm curious as to what the answer is, but I will leave my shift light at 10,900
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
dakota9498
Pro
Posts: 1181
|
posted January 10, 2010 03:51 PM
The stock cams are going to limit the rpm power can be made. A better filter and exhaust will help move the power up, but you will still be limited.
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
Halvefast
Zone Head
Posts: 806
|
posted January 11, 2010 12:23 PM
I have carpenter springs already, plus adding an ign module,
just wondering if the rods can take it for over a mile long?
Thanks for the replies.
____________
Texas Mile 200.256mph - Oct. 2007 (Update 202.577mph Oct 2008) NOS assisted
ECTA Ohio Mile 195.132mph
TexasMile 2012 199.9 mph all motor!
Streetriders Shootout 2008 series Pro/ET Champ!
Streetriders Shootout 2007 Series Pro/ET Runner-up!
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted January 11, 2010 12:54 PM
I've always wanted to do 12.5k for whatever reason....
|
|
|
HOME
NEW TOPIC