Newf14
Zone Head
2007 ZX1400
Posts: 563
|
posted December 12, 2009 06:40 AM
OSR Cut ZX14 Pans
I recieved my cut pan yesterday, I am very pleased with there coustomer service and the finished product is top notch. If anyone wants a cut pan this is the way to go, I now have another fine product from another fine company.
Newf14
  
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted December 12, 2009 06:52 AM
How much is that pan? Does it look like clems pan?
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted December 12, 2009 06:52 AM
We need some pics!!
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Shane661
Needs a life
Posts: 11494
|
posted December 12, 2009 07:03 AM
OSR is the Clem's pan...
|
1badvespa1400cc
Zone Head
power junkie
Posts: 691
|
posted December 12, 2009 07:51 AM
Waiting on mine to come back,then i'm sending them two more,I forgot to send them my pickup tube but they were more than helpful to send one back,what great customer service,well appreciated!!!!!!
____________
Just another foeteen!!!!!
|
14nooby
Zone Head
Posts: 987
|
posted December 12, 2009 09:04 AM
Clems shut down. He reopened as OSR and I know this because they sent me a letter stating this change.
|
Newf14
Zone Head
2007 ZX1400
Posts: 563
|
posted December 12, 2009 10:29 AM
quote:
OSR is the Clem's pan...
Yup what he said.
Newf14
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted December 12, 2009 01:16 PM
Oooo ok. Now you say that I remember him saying they were moving buildings, but I didn't catch the name. Great guy to deal with.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
750 turbo
Expert Class
Posts: 252
|
posted December 12, 2009 01:32 PM
Got my new clems pan a couple of weeks ago. Nice job quick service.
|
Lucky14
Pro
Posts: 1439
|
posted December 12, 2009 10:06 PM
IMHO, one of the best "bang for the buck" mods out there:
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
AcadianaZX
Advertiser
Posts: 530
|
posted December 13, 2009 12:36 AM
quote:
How much is that pan? Does it look like clems pan?
Hey Dusty. I just got my Clems pan. Very nice product and stand up service. I can't remember the pricing. You will get big savings if you send them yours. If you want to keep your pan let me know. Since I'm going with a sidewinder I want the Adams pan and I'll try to save you money on my pan, if your interested.
James
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted December 13, 2009 05:20 AM
quote:
quote:
How much is that pan? Does it look like clems pan?
Hey Dusty. I just got my Clems pan. Very nice product and stand up service. I can't remember the pricing. You will get big savings if you send them yours. If you want to keep your pan let me know. Since I'm going with a sidewinder I want the Adams pan and I'll try to save you money on my pan, if your interested.
James
Thanks james, but I just purchased one a couple months ago from clems, just didn't realize it was the same place. I need some oil tho, so I'm going to try and contact one of you guys today.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
AcadianaZX
Advertiser
Posts: 530
|
posted December 13, 2009 07:59 AM
Tressie will be happy to hear from you.
|
68gts2
Zone Head
hobbies ( Beating you !!! )
Posts: 927
|
posted December 16, 2009 05:13 AM
How much oil capisity is lost when the pan is cut down or is a side sump added? Is. It streetable if oil capisity is lost?
____________
Chromed-out,in the dirt 08SE with all the good stuff!!!
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted December 16, 2009 05:22 AM
Yes its streetable. I put exactly 4 qts in mine the last time I changed it, so your loosing the .3qts. When I drained the oil out I had it just on the front stand so the oil would drain to the back of the pan and drain out. Then I immediately put the rear stand back under it. Its not safe just on front stand. I didn't feel like I was getting all the oil out. But to be honest, what else came out didn't amount to much.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
1badvespa1400cc
Zone Head
power junkie
Posts: 691
|
posted December 16, 2009 05:56 AM
Yep good stuff,just got mine in the other day,thank's osr!!!!!!!!!!!!!
____________
Just another foeteen!!!!!
|
Newf14
Zone Head
2007 ZX1400
Posts: 563
|
posted December 16, 2009 05:33 PM
I put 4 quarts in mine as well, actually a lil more the engine was pretty well drained when I filled the OSR pan.
Now only if I could get rid of my stock pan.......I have the low profile plug with the guard removed on it,and about a dozen or so honda plug washers.
Newf14
|
01smokes
Needs a job
Posts: 2243
|
posted December 16, 2009 09:59 PM
do they offer a core charge or do they cut down the pan you send them? I really dont want to have my pan off my bike for 2 weeks so that's why im wondering
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted December 17, 2009 03:55 AM
Give shannon a call. He's a great guy to deal with!
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
ninjaboy311
Zone Head
Posts: 940
|
posted December 17, 2009 04:12 AM
quote:
do they offer a core charge or do they cut down the pan you send them? I really dont want to have my pan off my bike for 2 weeks so that's why im wondering
AcadianZX is selling his Clems pan if you want to buy one.
____________
Naarden Speedlinks Sponsored Rider
Schnitz Racing Sponsored Rider
8.74 @ 152 on stock motor and MR9 (Muzzy Powered), 205 lbs suited
|
AcadianaZX
Advertiser
Posts: 530
|
posted December 17, 2009 06:08 AM
Thanks Patrick. 200.00 for my pan. If someone wants to keep there stock pan and pickup.
01Smokes- Shannon has excellent service. He worked with me even though I took a few months to get him my pan. give him a call 317-523-4049.
|
1badvespa1400cc
Zone Head
power junkie
Posts: 691
|
posted December 17, 2009 07:32 AM
Did you reuse the oil pan gasket?
____________
Just another foeteen!!!!!
|
AcadianaZX
Advertiser
Posts: 530
|
posted December 17, 2009 08:12 AM
I used a new gasket, but the stock gasket did look reusable. I only had 800 miles on the bike at that time.
James
|
Sgoaty
Novice Class
Posts: 42
|
posted December 17, 2009 01:15 PM
Maybe a silly question but why cut down the oil pan?
Thanks
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted December 17, 2009 01:29 PM
When you lower the bike the oil pan is one of the lowest things to the ground. If you come down hard from a wheelie or hit something in the road the plug will knock a hole in the pan.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
|
|
HOME
NEW TOPIC