01smokes

Needs a job
Posts: 2243
|
posted April 13, 2010 09:15 PM
quote: can anyone share a flys out e85 map?
Not many people run the E85 yet, your best bet is gonna be have some one build you a custom map for it
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
madnessracing

Pro
Vmax and Busa Beater
Posts: 1140
|
posted April 14, 2010 04:08 PM
quote: can anyone share a flys out e85 map?
what mods do you have and for a small fee I can probably share it with you I spent $250 to get this map!
____________
Shorty's Performance
Team Madness Racing
|
redxtcy

Parking Attendant
Posts: 19
|
posted April 14, 2010 04:46 PM
well i took my muzzy map that i have been using and added 37 to each of the numbers and seems to be working ok im sure its not ideal but i need to save up to get a working wideband.
mods.. basic. cut the cat out, made it a single side and completely gutted my muffler.. lowered. streched 7 over. pc5, 16/45 gearing. and no fly's
thats my best with my small budget
been using a muzzy's m14 map with out flies and that seemed to be working for me.
im a big guy 280lbs. with stock gearing the best i could pull off last year was a 9.87 at 138. with 1.5ish 60'
just got the bike half way together for the track on friday.. running naked at the moment. waiting on parts to get painted. im going to see what happens on friday.
|
THOR_NZ

Parking Attendant
Posts: 27
|
posted June 27, 2011 12:15 AM
E85 Fuel Map forZ 2006 ZX14
quote: Bikeland member Wrongway stopped by with his zx14 to do a little dyno testing today ...His zx14 has nothing but slip ons and a PVC .. First of 4 pulls were done with Pump gas and made an avg of 163 hp and 100 Foot pound TQ .. Air fuel was 13.0 to 12.9 with pump fuel ... We drained the tank and added the E85 , the first pass it made 165 but was very rich at the upper RPMs ( 10.0 @ 10,500 ) .. We leaned it up to look more like the pump gas map ( 12.9 to 12.8 from 8000 RPMs up) ... It made 168 HP and 103 TQ ...
The E85 made 5 HP and 3 TQ more than the pump gas .. TQ was better from 3000 to red line than the pump gas ...
Nothing was done to the bike other than mapping changes to switch from pump gas to E85 ..The New PCV holds two maps , one for pump gas and one for E85 ... If you want to switch back from E85 to pump gas all you have to do is flip the map switch on the PVC ... Simple very simple .. This is a great bag for the buck seeing that E85 is about 2.00 a gallon Vs MR9 at 120.00 for 5 gallons .. The power gain is very close between the two fuels making the E85 a better choice ..You don't need to drain the E85 out after use like the MR9 ..
With the stock exhaust with slipons the power falls off at 9500 and it falls off really bad .. With a header like Brocks Smeg the power holds a flat line till 10600... I'm thinking The E85 would make even more power had the bike had a full exhaust , Maybe another 2 to 3 HP above 9500 ... As soon as i get the time i will test the E85 in my bike Vs pump gas and see what the gains would be with a full system .. I allready have the PCV on my bike and i saved the Map we used on Wrongway bike so i will not have to buy anything to make the change to E85 .. My thinking is the E85 should be worth close to a tenth of a second and maybe 2 MPH over pump gas ...That would be about what i see using MR9 fuel for a lot less cost and work .. Win Win ...
Hi Smokin and Wrongway,and anyone else who can help...
I was reading on your web site /forum about your work with E85 Ethanol.
I have 3 Kawasaki ZX14s which I race in NZ.
I am setting a 2006 ZX14 up to run on E85 Ethanol which no one has done in NZ. The bike has stock engine, secondary butterflies removed, Power Commander, Wide Band Commander, TRE, K&N Filter, Yoshimura headers with 4 in to one. Do you have any E85 Maps for the ZX14 I could get hold of to use as my Base Map for E85?
I am using the 2006 stock pump and injectors as I understand these will just do the job on E85.
Any tips or advise you can help with would be greatfully appreciated as we are " scratching our heads a bit" down here in NZ. re Ethanol in the ZX14.
Also what air:fuel reading should I expect on the Wide Band or analog Fuel/air gauge ?
I know that the fuel is increased significantly but am not sure if we are seeking a Fuel /Air Reading on the WIDE BAND OR Analog Gauge with a reading similar to optimum on gasoline ( 14.7 to 1). even though Ethanol is some where around 9 to 1?? Or should we be seeking a reading on the Fuel Airguage of around 9 ????
Can any one help on this??
Cheers
Alan
Black Thunder Racing NZ
|
wrongway
Pro
Posts: 1078
|
posted June 27, 2011 03:57 AM
if you have a good pump gas map , add 35 to the entire map. shoot for a 12:1 AFR if you are using one set up for gasoline... if it is set for lambda, i think it is .80.
stock pump and injectors will work to around 200 hp with the 06-07 injectors , so if you are spraying nitrous get some 660 or 720 cc injectors. Over 250 HP you will also need a 255 lph pump and a lockup clutch.
hope that helps,
Roy
|
THOR_NZ

Parking Attendant
Posts: 27
|
posted June 27, 2011 11:56 AM
E85
quote: if you have a good pump gas map , add 35 to the entire map. shoot for a 12:1 AFR if you are using one set up for gasoline... if it is set for lambda, i think it is .80.
stock pump and injectors will work to around 200 hp with the 06-07 injectors , so if you are spraying nitrous get some 660 or 720 cc injectors. Over 250 HP you will also need a 255 lph pump and a lockup clutch.
hope that helps,
Roy
Thanks Roy
Awesome info and it answered my query on Air/fuel ratio and Lambda.
Any suggestions on where to get the 660 or 720cc nozzles?? And what I might expect to pay for these?
I think there are a lot of people with a "phobia" about running E85 Ethanol and it is so easy for them to say don't go that way!
You have obviously done quite a lot of work on this. - Well done and thank you for sharing the information and results.
Cheers
Alan
Black Thunder Racing NZ
|
Rich

Expert Class
Just havin' fun!!
Posts: 300
|
posted June 27, 2011 03:22 PM
Edited By: Rich on 27 Jun 2011 23:27
I'm glad Roy had this figured out. He said give E85 a try. I said OK. I even got to use some of his E85 to start with. Can't beat that. I have the added HP, plus I don't have to drain it and flush it out when I get home. I can pull the E85 out and put pump gas back in, or I can just ride to work for the next few days on the E85. Run it down till the gauge blinks for a while and fill up. When I fill up at the pump, just switch maps. So easy. $3.XX a gallon is easy on the bank too. If it's available in your area, it is SO easy.
____________
07 Green and Black, How fast is fast?
203 for now. Limited $$ = limited HP.
|
wrongway
Pro
Posts: 1078
|
posted June 27, 2011 03:37 PM
quote:
quote: if you have a good pump gas map , add 35 to the entire map. shoot for a 12:1 AFR if you are using one set up for gasoline... if it is set for lambda, i think it is .80.
stock pump and injectors will work to around 200 hp with the 06-07 injectors , so if you are spraying nitrous get some 660 or 720 cc injectors. Over 250 HP you will also need a 255 lph pump and a lockup clutch.
hope that helps,
Roy
Thanks Roy
Awesome info and it answered my query on Air/fuel ratio and Lambda.
Any suggestions on where to get the 660 or 720cc nozzles?? And what I might expect to pay for these?
I think there are a lot of people with a "phobia" about running E85 Ethanol and it is so easy for them to say don't go that way!
You have obviously done quite a lot of work on this. - Well done and thank you for sharing the information and results.
Cheers
Alan
Black Thunder Racing NZ
schnitz has 725 cc injectors for around $500 dollars, my friends at Fuel Injector Connection made me a set of bosch injectors for $300 bucks...http://fuelinjectorconnection.com/shop/.... I have also seen injectors on ebay for around $300 dollars.
Roy
|
E1000

Novice Class
Posts: 34
|
posted July 01, 2011 03:45 PM
E85 - you can spray big amounts with hd springs on stock motor.
____________
1st GEN ZX14
few bolt ons
|
Johnnycheese
Pro
Posts: 1008
|
posted July 01, 2011 03:52 PM
Not without BIG injectors
____________
Builder and tuner of some of the fastest N.A. and P/A Hayabusas and ZX12 /14 in Texas
|
01smokes

Needs a job
Posts: 2243
|
posted July 01, 2011 05:29 PM
quote: Not without BIG injectors
+1 on that. But it would honestly be easier to run c16 and cheaper when spraying. That's why I'm going back to race gas for this season...
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
wrongway
Pro
Posts: 1078
|
posted July 02, 2011 06:56 AM
quote:
quote: Not without BIG injectors
+1 on that. But it would honestly be easier to run c16 and cheaper when spraying. That's why I'm going back to race gas for this season...
not sure I understand how it is cheaper....
cost to upgrade to 300+ hp e85 setup------ $375 (940cc injectors and a 255kph pump)
cost of 5 gal of c16 ---$80
cost of 5 gal of e85 --$16
seems like it is cheaper to use e85 if you plan on burning more than 6 5gal pails of c16.
Roy
|
Shane661

Needs a life
Posts: 11494
|
posted July 02, 2011 07:01 AM
Edited By: Shane661 on 2 Jul 2011 15:06
Unfortunately E85 is not around the corner for some of us...it is an 70-80 mile round trip for me, at least. Then you have to factor in that you are burning around 40% more fuel.
Then again, if you get some pails that seal well you could always just go and buy a lot of it. Roy, have you kept any for a long time...any issues with moisture??
I think some people like the comfort of a sealed fuel container. Maybe potentially less contamination, quality issues, and/or octane fluctuation?
Shane
|
wrongway
Pro
Posts: 1078
|
posted July 02, 2011 11:07 AM
quote: Unfortunately E85 is not around the corner for some of us...it is an 70-80 mile round trip for me, at least. Then you have to factor in that you are burning around 40% more fuel.
Then again, if you get some pails that seal well you could always just go and buy a lot of it. Roy, have you kept any for a long time...any issues with moisture??
I think some people like the comfort of a sealed fuel container. Maybe potentially less contamination, quality issues, and/or octane fluctuation?
Shane
I have kept e85 for 3 months in a air tight fuel jug ,,,, no problems.. bike ran the same mph .
Roy
|
01smokes

Needs a job
Posts: 2243
|
posted July 02, 2011 02:36 PM
quote:
quote:
quote: Not without BIG injectors
+1 on that. But it would honestly be easier to run c16 and cheaper when spraying. That's why I'm going back to race gas for this season...
not sure I understand how it is cheaper....
cost to upgrade to 300+ hp e85 setup------ $375 (940cc injectors and a 255kph pump)
cost of 5 gal of c16 ---$80
cost of 5 gal of e85 --$16
seems like it is cheaper to use e85 if you plan on burning more than 6 5gal pails of c16.
Roy
5 gallons of c16 will last me like 2 months. So its not really that bad. And the fuel system cost over a grand when I built it on the Turbo 14.
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
Rich

Expert Class
Just havin' fun!!
Posts: 300
|
posted July 02, 2011 05:28 PM
Now here's a question for guys that run C16, Q16, MR9, 11 etc. How long do you leave your fuel in the bike? Can you leave that in there overnight for racing all weekend? Once you're done for the weekend, do you drain it back into the jug or get rid of it? Just wondering. I like that E85 can sit in my tank until I run it out. Then again mine gets used on a daily basis for the most part. Not sure how much that added convenience plays into it for everyone else.
____________
07 Green and Black, How fast is fast?
203 for now. Limited $$ = limited HP.
|
Shane661

Needs a life
Posts: 11494
|
posted July 02, 2011 05:33 PM
Edited By: Shane661 on 3 Jul 2011 01:35
quote: Now here's a question for guys that run C16, Q16, MR9, 11 etc. How long do you leave your fuel in the bike? Can you leave that in there overnight for racing all weekend? Once you're done for the weekend, do you drain it back into the jug or get rid of it? Just wondering. I like that E85 can sit in my tank until I run it out. Then again mine gets used on a daily basis for the most part. Not sure how much that added convenience plays into it for everyone else.
C16 is no problem to leave in the tank. MR9 is ok for the weekend, but then you need to siphon it out and use it pretty soon. The big drawback for MR9 is cost...like $135 for 5 gallons. That is a big, big factor.
|
THOR_NZ

Parking Attendant
Posts: 27
|
posted July 03, 2011 12:00 AM
quote: if you have a good pump gas map , add 35 to the entire map. shoot for a 12:1 AFR if you are using one set up for gasoline... if it is set for lambda, i think it is .80.
stock pump and injectors will work to around 200 hp with the 06-07 injectors , so if you are spraying nitrous get some 660 or 720 cc injectors. Over 250 HP you will also need a 255 lph pump and a lockup clutch.
hope that helps,
Roy
Hi Roy and others..
I have just set up my ZX14 on E85. Starts and Runs fine, however I am still not 100% sure of the mixture settings still.
I had a base Ethanol E85 Map sent to me from a guy in the USA which he had been running Mid 8's on a stock ZX14 ( Slight Modifications - secondary butterflies removed etc)
I Started the bike on that....then I modified the map to use the richer settings from your Map that you posted here. Running both statically the first map was giving an airfuel ratio of around 14.5 - 15 to 1.on the wide band and analog gauge.
With your map sttings It brought the Fuel Air Ratio Back to about 14: 1.
I then added +10 across all of the numbers but the Air Fuel ratio Remained the same.
I added another +10 giving +20 above your Map figures and the Air Fuel ratio reverted back to between 14:1 and 14.5 :1 but it was definitely rich as there was almost a slight mist from the exhaust pipe.
At the same time I used a Friends Diagnostic Infra Red Analyzer.
Using the anaylyzer in the exhaust at the same time as checking the Fuel air on the wide band
The First Base E85 Map I had from the USA gave a Co% of 8.9 which I believe equates to a Fuel Air Ratio of between 11 and 11.5 : 1 and had a HC Reading of 271ppm
With the map modified to your Autotune Figures it gave a CO% of 9.41 - 9.5 which I think would equate to a Fuel Air Ratio of about 10.5 - 11 to 1 . HC Reading was 256ppm
With the last run with +20 map over your figures the CO% was 9.07 - 9.15 which I think must be about 10: 1 Fuel Air Ratio and an HC of 168 ppm
As mentioned the bike appears to be very rich at the last setting, but the reading on the Fuel Air on the wide Band Commander and analogue guage are throwing me a wee bit.
My Fuel Air Probe is definitely for Gasoline....but should the readings be as high as what I am reading??? Any thoughts and comments would be appreciated. ( Perhaps my probe is not reading correctly??)
Cheers
Alan - Black Thunder Racing NZ
|
wrongway
Pro
Posts: 1078
|
posted July 03, 2011 05:29 AM
I am not familiar with the wideband commander... will it try to adjust the fuel to a trim table like the autotune on the PCV?
are you confident that the O2 sensor is ok? I have had no problems getting the bike to go very rich on a dyno ..... so I am concerned that you have not been able to see AFR's below 14:1 , but you have the fuel so rich you can see it...
is it only on top end runs that the fuel stays around 14:1 or is it over the entire rpm range...
why did you try to modify the flies out map ? have you tried to run that on the dyno or track ?
Roy
|
THOR_NZ

Parking Attendant
Posts: 27
|
posted July 03, 2011 07:48 PM
quote: I am not familiar with the wideband commander... will it try to adjust the fuel to a trim table like the autotune on the PCV?
are you confident that the O2 sensor is ok? I have had no problems getting the bike to go very rich on a dyno ..... so I am concerned that you have not been able to see AFR's below 14:1 , but you have the fuel so rich you can see it...
is it only on top end runs that the fuel stays around 14:1 or is it over the entire rpm range...
why did you try to modify the flies out map ? have you tried to run that on the dyno or track ?
Roy
Hi Roy,
Sorry but I am not really familiar with the PC V other than it has the Auto Tune Function.
I was wondering if there is an issue in the 02 reading at the probe on my ZX14 as when using your map ( well the part I could read) along with the other USA ZX14 Drag Map....the mixtures seemed pretty good ( perhaps slightly rich) on the CO% Reading
I intentionally made it richer to see if the Fuel air Reading would come down but as mentioned 14:1 seems to be it , and yet the bike is way rich when +20 was added to the your map but the Wide Band did not detect it.
The Dyna Jet Wide Band is using the Bosch 02 sensor Probe and I am wondering if this is different to the one used in your PC V??
Can you confirm the PCV you are using and the year of your ZX14 as I recall you mentioning something about the PCV only being brought out for later model bikes. Mine is an 06 and wonder if one of those would fit??
If I could ask a Big favour........is there any chance of you being able to email me a copy of your full E85 Map for the ZX14?? - thor7@xtra.co.nz
As mentioned what I have used are all of the figures of the map you posted but I did not have your data above what ever was posted before?? I would appreciate it if you can help out.
We do not have a dyo nearby so want to ensure what I am using won't cause any damage by being too lean and your figures loaded in to the bottom end of my map look good on the Infra Red CO % Reading.
Can you confirm that on your ZX14 what typical Fuel /Air Reading you have using the PCV??
I am wondering if all PCIII USB's will have the same reading as mine on E85 whether Dyna Jet have a "Fix" for the Fuel Air Reading on the Wideband if using E85??
Cheers
Alan - Black Thunder Racing NZ
|
Oz Booster
Expert Class
Posts: 230
|
posted July 03, 2011 11:07 PM
Alan how much leaded fuel have you put passed your 02 sensor, ??
the reading for gasoline or e85 or whatever fuel you use is a calibration from the 0-5v output from the wideband , say your reading 2.5v and that equates to 12.0 on the gas scale and 9.0 on the e85 scale , its still 2.5 v and if your familiar with the numbers you want on the gas scale then use it
Numbers above are examples only i don't have a v/af table in front of me
|
THOR_NZ

Parking Attendant
Posts: 27
|
posted July 03, 2011 11:19 PM
Hi Oz Booster
Good Point. The NZ Fuel I normally run is 98 Octane and is unleaded so the majority of the fuel over the sensor has been unleaded. I did run a bit of higher octane leaded in the USA at Bonneville, but ended up changing the O2 Sensor after that anyway.....
But the point you made about about the calibration and the voltage is interesting. I might replace the 02 probe ' just in case and see how it all reads then.
Cheers
Alan
|
Oz Booster
Expert Class
Posts: 230
|
posted July 04, 2011 05:18 AM
Probably the same as the 98 we get here in Aus
You going back to Bonneville any time soon ?? were shipping 3 bikes next week , madness here trying to get finished in time ..
|
THOR_NZ

Parking Attendant
Posts: 27
|
posted July 04, 2011 11:49 AM
quote: Probably the same as the 98 we get here in Aus
You going back to Bonneville any time soon ?? were shipping 3 bikes next week , madness here trying to get finished in time ..
Would like to have gone back this year but just can't make it.
We plan to look at Bonneville for 2012. The $$ are a bit tight this year and we want to get a few more HP out of the engine . Should be a few more kiwis going back in 2012.
Cheers Alan
|
Oz Booster
Expert Class
Posts: 230
|
posted July 04, 2011 02:24 PM
Be a few more Aussies going next year too, 3 cars that were going this year but cancelled early due to worrys about wet salt , will be going plus the several bikes were getting each year now , , Rich Assen will fly the Kiwi flag for you this year then
|
|
|