Axel from Germany
Novice Class
Posts: 34
|
posted October 22, 2009 09:36 AM
 Edited By: Axel from Germany on 22 Oct 2009 17:48
My Dynorun
Hello,
Yesterday I was on a Dynorun, here you see the result.
I have the model 2008 with Akrapovic full System with Muffer, BMC, PC V, Autotune, Flys out.
What Facktorypro Stacks recommends it to me?
Race? or Midrange ?
[URL=http://img405.imageshack.us/i/hinterradzzr1400211009.png/] [/URL]
  
|
ZX11D
Zone Head
Internet Police
Posts: 674
|
posted October 22, 2009 10:01 AM
Very respectable numbers 
187.72 PS = 185.15 HP
147.35 Nm = 108.67 lb.ft
____________
'94 ZX-11
'07 ZX-14
|
Shane661
Needs a life
Posts: 11494
|
posted October 22, 2009 10:10 AM
I have the race stacks in my bike, but I think that for the street the oem are very good. I may even switch back to them for the dragstrip.
Shane
|
Axel from Germany
Novice Class
Posts: 34
|
posted October 22, 2009 10:12 AM
quote:
I have the race stacks in my bike, but I think that for the street the oem are very good. I may even switch back to them for the dragstrip.
Shane
Hi Shane, what is oem? Do you mean the original?
|
Shane661
Needs a life
Posts: 11494
|
posted October 22, 2009 11:18 AM
Yes, the original...original equipment manufacturer.
|
INTIMIDA2OR
Needs a life
RED rider!
Posts: 13081
|
posted October 22, 2009 12:29 PM
quote:
Very respectable numbers
187.72 PS = 185.15 HP
147.35 Nm = 108.67 lb.ft
Yes those are good numbers! Very cool !
____________
'06 Passion Red ZX-14
*Lee*
|
Douglas Home
Zone Head
Posts: 710
|
posted October 22, 2009 12:44 PM
Some trivia
1ps=.9863hp
.746kw=1hp
ft/lbs x rpm
hp= -------------------
5252
Ducks Nuts= awsome!!!!!!
____________
Doug Mackay Australia
|
LAB3
Needs a job
Posts: 2977
|
posted October 22, 2009 04:05 PM
Odd that at 5250 RPM the torque and HP did Not cross over each other.Looks
like 7000 RPM???
|
ZX11D
Zone Head
Internet Police
Posts: 674
|
posted October 22, 2009 04:11 PM
They would, if the units would be in HP / lb.ft.
____________
'94 ZX-11
'07 ZX-14
|
Axel from Germany
Novice Class
Posts: 34
|
posted October 23, 2009 03:24 AM
Thanks for the recognition.
How much Wheel HP does a model 2008 2009 in Stocks?
|
Axel from Germany
Novice Class
Posts: 34
|
posted October 23, 2009 06:15 AM
quote:
Yes, the original...original equipment manufacturer.
Hello,
Shane, what do you think about ported head.
Will the reward for my engine?
I thought also to increase the compression ratio of 12.1 to 12.5.
|
Flame On
Needs a life
Fuel Air & Spark
Posts: 17104
|
posted October 23, 2009 06:37 AM
Low octain oxigen fuel and I cleand my chain really good and shot it with wd40 and got a great # also on my last dyno shoot out
____________
77 RD 400
80 GS1000 GT
06 ZX14
|
Flame On
Needs a life
Fuel Air & Spark
Posts: 17104
|
posted October 23, 2009 06:41 AM
I dont use wd40 as a chain lube I use motul after the dyno shootout
____________
77 RD 400
80 GS1000 GT
06 ZX14
|
Shane661
Needs a life
Posts: 11494
|
posted October 23, 2009 06:43 AM
Edited By: Shane661 on 23 Oct 2009 14:43
quote:
quote:
Yes, the original...original equipment manufacturer.
Hello,
Shane, what do you think about ported head.
Will the reward for my engine?
I thought also to increase the compression ratio of 12.1 to 12.5.
I don't know about porting, but a basic "Supersport" style head with compression increase and degree's cams is supposed to be good for 6-8 hp.
|
Flame On
Needs a life
Fuel Air & Spark
Posts: 17104
|
posted October 23, 2009 06:46 AM
next months dyno shoot out I will run with no K&N air filter and comare the Suzuki stakes will also be hire hope I still win.
____________
77 RD 400
80 GS1000 GT
06 ZX14
|
|
|
HOME
NEW TOPIC