HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: This is Crazy - Gen 2 Busa NEW TOPIC NEW POLL POST REPLY
rich s



Posts:
posted July 16, 2009 01:35 PM        
quote:
quote:
I just checked with my reputable builder to see how my 350hp Busa was doing. He said better then expected. He has three days of work in it and almost has the plastics off. So far so good, and am so happy I switched from a 14 and got a real bike.


If your stretching the truth you just made your engine builder look like an idiot. the palstic comes off an 08 busa in minutes if your half way smart.


Like I would take somebodies word on this forum over that of a reputable builder. I am just stating facts here. My builder has worked on both Kaw's and Zooks and knows what he is doing.

  Ignore this member   
Shane661


Needs a life
Posts: 11494
posted July 16, 2009 01:36 PM        
quote:
quote:
quote:
I just checked with my reputable builder to see how my 350hp Busa was doing. He said better then expected. He has three days of work in it and almost has the plastics off. So far so good, and am so happy I switched from a 14 and got a real bike.


If your stretching the truth you just made your engine builder look like an idiot. the palstic comes off an 08 busa in minutes if your half way smart.


Like I would take somebodies word on this forum over that of a reputable builder. I am just stating facts here. My builder has worked on both Kaw's and Zooks and knows what he is doing.


I agree. It sounds to me like he is taking his time and doing the job right.

  Ignore this member   
1badzx12r


Needs a life
Posts: 8321
posted July 16, 2009 01:37 PM        Edited By: 1badzx12r on 16 Jul 2009 21:41
quote:
quote:
busa clutch is bad compared to a zx14 clutch too.. as me how i know that


oh and putting the plastics or fairings back on a busa is a bitch too ..and busa builders want to tell you how easy it is to work on ..i'm simplifying it now as i reinstall it back on the bike after installing a ti-force exhaust ..


Why is a busa clutch worse then a 14?



you should know ..its just not smooth on the let go .. or just not steady on its release ..or is not as refined .. it just don't have that feel to it compared to the zx14 .. i just can't pinpoint it .


but it not as good as the zx14 ..


and the plastics are a bitch and i don't care how easy you say they are .. to many push pins in hidden hard to get to areas .. unless you took all in inner fairings off and never reinstalled

and i'm talking about a gen 2 ..i just got done stripping bike and reinstalling everything ..
____________
http://www.youtube.com/watch?v=S06nIz4scvI

  Ignore this member   
Bently


Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
posted July 16, 2009 03:56 PM        
Yup I'm talking gen 2 and they are cake and we reinstall everything. first one i did I thought they sucked but after doing a couple I realized how easy they are if you do it right.
And about the clutch that's your opion, you can't ride a busa as good as a 14 that don't make the clutch junk. For me it's the other way around I have learned how to launch my 14 but it took alot more seat time for me. I can jump back on a busa and still out 60ft what I can do on the 14, does that make the 14 clutch junk, nope it's just my clutch hand. Both bikes have clutches that will last 200 passes and more with the right rider.

  Ignore this member   
1badzx12r


Needs a life
Posts: 8321
posted July 16, 2009 07:05 PM        Edited By: 1badzx12r on 17 Jul 2009 03:07
hmmmmmmmmm bently why did you sell your busa and repurchased a zx14 then.... and thats your opinion on how great a bike it is ...cough WAS ..




BUT AFTER OWNING THIS ONE 08 nobody is gonna sell me on how great it is .. or how easy it is to work on ..
____________
http://www.youtube.com/watch?v=S06nIz4scvI

  Ignore this member   
bigdtd


Needs a job
Interceptors
Posts: 4209
posted July 16, 2009 07:32 PM        
if you want to ride a buzzy busa go ahead, i will take the smooth 14. also if smokin and bill eason say its the shit ITS THE SHIT end of story.
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT

  Ignore this member   
Ninja ZX-14


Expert Class
Posts: 111
posted July 16, 2009 08:10 PM        
"As long as I'm spending my money on my own bike, who the hells business is it what I got done to it?!"
You post a forum trying to compare bike for bike, but you don't want to post up what you got done?? Now That's being shady my friend...


eklipse636, I have posted up at least a couple times what I got done to my bike earlier on this same thread. You got to go back and read it. Not enough reading on this forum. Too much looking at Avatars or something.
____________
Ninja 14

  Ignore this member   
Bently


Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
posted July 17, 2009 03:48 AM        
quote:
hmmmmmmmmm bently why did you sell your busa and repurchased a zx14 then.... and thats your opinion on how great a bike it is ...cough WAS ..




BUT AFTER OWNING THIS ONE 08 nobody is gonna sell me on how great it is .. or how easy it is to work on ..


Actually I would still have the Busa if I would not have put a turbo on it. And it is a great bike just like the 14 is. nothing wrong with either one.

  Ignore this member   
1badzx12r


Needs a life
Posts: 8321
posted July 17, 2009 03:56 AM        
then bently why did you buy another zx14 instead of another busa when you sold the turbo busa ....
____________
http://www.youtube.com/watch?v=S06nIz4scvI

  Ignore this member   
Bently


Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
posted July 17, 2009 04:05 AM        
cause I stole the 14. and knew they where great bikes. had 400 miles on it and bought it for around 6900.00 with tons of extras. at the time 08 busa's were 9000 or better used mostly stock. And remember I've never bad mouthed the 14 so I don't have to justify buying one, but I would buy a Busa again as well. they are bullet proof to. And both bikes are the same as far as et's go. i've proven that to myself. Give me a gen 2 busa and a 14 set up the same and I will run almost the same et. Like I've said before love both bikes and would be proud to own either one.
  Ignore this member   
1badzx12r


Needs a life
Posts: 8321
posted July 17, 2009 04:44 AM        
well i got my busa now and i'm scared to put a 40 shot on it due to the cylinders splitting that i've been reading about .. most likely won't happen .. but i've got that luck when it comes to stuff like that .. also my bikes are not just dragbikes .. i ride them daily .. busa did a 200 mile hike yesterday and will see around 1500 miles a month ..and some track duty around 100 passes a month .. i'm active
____________
http://www.youtube.com/watch?v=S06nIz4scvI

  Ignore this member   
rich s



Posts:
posted July 17, 2009 06:04 AM        
My reputable builder just got done installing the MBC and put it on the dyno naked. He is at 275hp right now and said we will get another 20 by just adding the plastics. He still has the other mods to do yet, I can't wait!!
  Ignore this member   
1badzx12r


Needs a life
Posts: 8321
posted July 17, 2009 07:00 AM        Edited By: 1badzx12r on 17 Jul 2009 15:12
rich s .. did your builder install a J-Force pipe with the self lubing air flow coating . i've seen results from this pipe and at 7500.0 for 65hp thats a deal






https://www.motomummy.com/store/product.php?productid=17061&cat=25



https://www.motomummy.com/store/popup_magnifier.php?productid=17061&imageid=

Heres the dyno graph to prove HP
____________
http://www.youtube.com/watch?v=S06nIz4scvI

  Ignore this member   
zixxer14


Pro
Damn that was Quick
Posts: 1233
posted July 17, 2009 07:26 AM        
quote:
rich s .. did your builder install a J-Force pipe with the self lubing air flow coating . i've seen results from this pipe and at 7500.0 for 65hp thats a deal






https://www.motomummy.com/store/product.php?productid=17061&cat=25



https://www.motomummy.com/store/popup_magnifier.php?productid=17061&imageid=

Heres the dyno graph to prove HP


You believe that shit? I got some land I need to sell you!

  Ignore this member    Click here to visit zixxer14's homepage. 
1badzx12r


Needs a life
Posts: 8321
posted July 17, 2009 07:30 AM        
send pics of said land so i'll know what it looks like ..also do you have a dyno result graph of said land so i know what the R factor of the soil is .. thanks
____________
http://www.youtube.com/watch?v=S06nIz4scvI

  Ignore this member   
LAB3


Needs a job
Posts: 2977
posted July 17, 2009 07:39 AM        
quote:
send pics of said land so i'll know what it looks like ..also do you have a dyno result graph of said land so i know what the R factor of the soil is .. thanks


LMAO that is some Funny shit.This thread has been Fun. keep throwing out the bait.

  Ignore this member   
Ninja ZX-14


Expert Class
Posts: 111
posted July 17, 2009 08:27 AM        
quote:
quote:
rich s .. did your builder install a J-Force pipe with the self lubing air flow coating . i've seen results from this pipe and at 7500.0 for 65hp thats a deal






https://www.motomummy.com/store/product.php?productid=17061&cat=25



https://www.motomummy.com/store/popup_magnifier.php?productid=17061&imageid=

Heres the dyno graph to prove HP


You believe that shit? I got some land I need to sell you!

Hahaha! Pipe giving you an additional 65 HP. LMAO! And y'all thought I was crazy.
____________
Ninja 14

  Ignore this member   
rich s



Posts:
posted July 17, 2009 09:31 AM        Edited By: rich s on 17 Jul 2009 17:34
quote:
rich s .. did your builder install a J-Force pipe with the self lubing air flow coating . i've seen results from this pipe and at 7500.0 for 65hp thats a deal






https://www.motomummy.com/store/product.php?productid=17061&cat=25



https://www.motomummy.com/store/popup_magnifier.php?productid=17061&imageid=

Heres the dyno graph to prove HP


Thanks for the tip bud!! I just got of the phone with my reputable builder. He told me he could make me one that will gain me 70RWHP out of used chewing gum, a toothpick and another used condom for half that price. Now for you 14 lovers, he said you are screwed. Because the Busa is so much more advanced then the 14 it is the only bike this particular mod will work on.

On a side note, I am SO glad I started saving my used condoms. As you can see they have many uses. My only problem is I have only had protected sex 3 time so I am down to one backup. If anybody wants to help a brotherout with a couple magnums I can pay through paypal. Thanks all, love this forum!

  Ignore this member   
Bently


Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
posted July 17, 2009 04:21 PM        
quote:
well i got my busa now and i'm scared to put a 40 shot on it due to the cylinders splitting that i've been reading about .. most likely won't happen .. but i've got that luck when it comes to stuff like that .. also my bikes are not just dragbikes .. i ride them daily .. busa did a 200 mile hike yesterday and will see around 1500 miles a month ..and some track duty around 100 passes a month .. i'm active


1Bad is your busa a 1441? if not you should have no worry about cylinders splitting as I've only heard it happeing to 1441's. my buddy has been spraying a 40 shot on his all year with out a hint of an issue'

  Ignore this member   
1adam12


Expert Class
Posts: 292
posted July 17, 2009 05:51 PM        
OH BOY HERE WE GO AGAIN!!!!!!!!! 2 strokes lube there pipes is that why there so fast?
  Ignore this member   
Bad in Black


Expert Class
Posts: 348
posted July 18, 2009 02:05 AM        Edited By: Bad in Black on 18 Jul 2009 10:13
quote:
quote:
quote:
busa clutch is bad compared to a zx14 clutch too.. as me how i know that


oh and putting the plastics or fairings back on a busa is a bitch too ..and busa builders want to tell you how easy it is to work on ..i'm simplifying it now as i reinstall it back on the bike after installing a ti-force exhaust ..


Why is a busa clutch worse then a 14?



you should know ..its just not smooth on the let go .. or just not steady on its release ..or is not as refined .. it just don't have that feel to it compared to the zx14 .. i just can't pinpoint it .


but it not as good as the zx14 ..


and the plastics are a bitch and i don't care how easy you say they are .. to many push pins in hidden hard to get to areas .. unless you took all in inner fairings off and never reinstalled

and i'm talking about a gen 2 ..i just got done stripping bike and reinstalling everything ..

Rob I can't believe you went and picked up an 08 busa....didn't you learn your lesson with the first gen? And I agree 100%....the busa slipper clutch is a drag (lol) to launch, it slips to a point then locks up.....makes getting a good launch damn near impossible. And the plastics suck ass as well
One thing I can say tho is anything engine related, like changing plugs, is wayyy wayyy WAYYY easier on the busa with the hinged lift up tank. The 14's monoque frame makes it feel deceptively light and flickable for a big bike, but also makes working on it a MAJOR pain

  Ignore this member   
1badzx12r


Needs a life
Posts: 8321
posted July 18, 2009 03:56 AM        
http://my.sportbikeclub.com/_BusaMan-Anthem/video/631774/46089.html




no bently mines bone stock motor ..

BB yeap i never learn .i just had to have 1 to try out ..was gonna put a smaller front sprocket on it last nite ..but i quit cause of removal of 1/2 the fairing to get to the sprocket cover dayum .. yes i agree with you on plug removal .. but try oil filters
____________
http://www.youtube.com/watch?v=S06nIz4scvI

  Ignore this member   
Bently


Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
posted July 18, 2009 04:23 AM        
1BAD I wish I was close to you so I could show you how easy the plastics come off.Side fairing to change sprocket less then 4 minutes. But I have had lots of experience with that plastic as the other 4 bikes I help work on are all gen 2s If your motor is bone stock you won't have the cylinder problem.
  Ignore this member   
1badzx12r


Needs a life
Posts: 8321
posted July 18, 2009 06:36 AM        Edited By: 1badzx12r on 18 Jul 2009 14:37
if you can pull the side fairings in 4 minutes ..i'd buy you a beer .. but i can do my zx14 lower fairing in 2 minutes


hey bently what other bikes front sprockets will fit a 08 busa you know .. like an 07 gixxer 1k will it fit ..
____________
http://www.youtube.com/watch?v=S06nIz4scvI

  Ignore this member   
gilberjj


Needs a job
Friend of Fast
Posts: 3196
posted July 19, 2009 01:47 PM        
Correct me if I'm wrong, but has a 14 gone into the 8s in supersport trim? Bill was saying that busas aren't competitive like the 14s and gsxr1000s at that level, but brocks went 8.99@155 without any motor work. Simply bolt-ons. That's flying!

http://www.youtube.com/watch?v=wrsIt_I6hqw

  Ignore this member   
All times are America/Va [ This thread is 8 pages long: 1  2  3  4  5  6  7  8     Next» ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: This is Crazy - Gen 2 Busa NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.34526705741882 seconds processing time