14nooby
Zone Head
Posts: 987
|
posted May 17, 2009 04:05 PM
Hit the 8's.......Yeah
What a great day. Finally hit 8's. I ran MR9 with Brocks track map and WOW look at the MPH. I know this 09 makes the HP compared to the 06-07 models. Bike should be capable of much more. STOCK MOTOR>>>>>> Missed you today Smokin.
  
|
kaw-rick
Pro
Posts: 1167
|
posted May 17, 2009 04:09 PM
Yeh with that 1.50 sixty the bikes def doing its job.
|
Beondwacko
Expert Class
Posts: 393
|
posted May 17, 2009 04:14 PM
That thing is rolling out HARD !!!! 126 in the 1/8 ?!? Dayummm
Good for you !
____________
08' Atomic Silver, PCIII, Brocks pipe,BMC, -1, strapped front end
|
smokinZX14
Needs a life
Posts: 10197
|
posted May 17, 2009 04:21 PM
Very very good ...... That bike would go 8.60s with a 1.40 60 footer .. Sorry i didn't make it but had honey do list today ...Drier took a shit and had to fix it before wife went to work ..
From my testing so far with my 09 it seems the 08 09 just maybe faster than the 06 07 bikes ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
smokinZX14
Needs a life
Posts: 10197
|
posted May 17, 2009 04:28 PM
Here is a ticket from BMP on the 06 zx14 ...This one is pretty close to yours ... I can remember but i think that was on MR9 also , it could have been the old U4 that worked very well also..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted May 17, 2009 04:35 PM
Good job!
|
smokinZX14
Needs a life
Posts: 10197
|
posted May 17, 2009 04:40 PM
quote:
Good job!
Your next to get an 8 Bently.........
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted May 17, 2009 04:52 PM
it's on my list this year but don't know if I can pull it off on motor at 200lbs unsuited. might have to at least get some mr9.
|
14nooby
Zone Head
Posts: 987
|
posted May 17, 2009 04:58 PM
I know with more seat time I will get into the low 1.40s. I had 2 1.40 60 ft passes but wheelied and ran 9.0s. Well now 8.60s will be my new goal. Thanks Smokin
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted May 17, 2009 05:43 PM
 Edited By: dubious on 18 May 2009 01:44
I think you got a wednesday motor! 
That motor is pulling nice!
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
KaiBosh
Novice Class
Posts: 66
|
posted May 18, 2009 04:40 AM
With no other change than running normal 87 octane, what would the difference in time be?
|
kawboy4ever
Novice Class
Posts: 65
|
posted May 18, 2009 05:35 AM
Hey smokin and 14nobody,
Do you guys roll on full throttle when you leave the line from what you staged at and ride the clutch out? Or do you roll on a little from what you staged at and then get to full throttle once the clutch is fully out?
I have a habit of rolling on full throttle and ride clutch out when leaving line, but when I had my 14 I would just wheelie. was running 16/43
|
14nooby
Zone Head
Posts: 987
|
posted May 18, 2009 05:48 AM
My bike picked up 2 Mph in the 8th and 4 in the 1/4 running MR9. As far as the throttle yes I pin it @100% off the line. I use the clutch to adjust the throtlle as needed.
|
kawasakijockey
Pro
Posts: 1876
|
posted May 18, 2009 06:00 AM
quote:
My bike picked up 2 Mph in the 8th and 4 in the 1/4 running MR9. As far as the throttle yes I pin it @100% off the line. I use the clutch to adjust the throtlle as needed.
That is a nice gain with just fuel. That is like 10 more hp by numbers.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost
|
smokinZX14
Needs a life
Posts: 10197
|
posted May 18, 2009 06:29 AM
I have run 8.80s on MR9 , U4 and 87 pump gas all at 153 to 154 ...Hell if i know why ? I have run 123 to as high as 127 in the 1/8 mile on pump gas , strange is it not ? That is why i stopped buying MR9 about 2 years ago... My 8.70s passes where on MR9 and i have never done that on pump gas ..My best 1/8 mile numbers ( 5.60 ) was also on MR9 but i have run many low 5.60s ( 5.62 a few times )on pump gas .. That is why i can't see paying all that money for MR9 ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
00Busa
Expert Class
Trying to go FASTER !
Posts: 270
|
posted May 18, 2009 07:10 AM
You guys are "riding" the wheels off of those things. I hope to see similar times at a local 1/4 track thats opening here in SC. I already know I can't match that mph !
____________
'00 Busa / '06 14 /
IT AINT BRAGGING, IF YOU CAN BACK IT UP !
|
SteddyTeddy
Pro
Posts: 1664
|
posted May 18, 2009 07:11 AM
Real good times for only a 1.50 60'!
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted May 18, 2009 03:05 PM
wow!
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted May 18, 2009 10:57 PM
That bike is making some MAJOR power for sure! Great time!!!!!!
|
Superman T
Pro
Posts: 1831
|
posted May 19, 2009 01:21 AM
great times!
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted May 19, 2009 04:08 PM
isn't it amazing all the 8 second cool running zx14s live in florida? only wednesday bikes sent here 
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
Shane661
Needs a life
Posts: 11494
|
posted May 19, 2009 04:11 PM
I have an unopened 5 gallon jug of MR9 here. Any suggestions for special care/precautions?
|
14nooby
Zone Head
Posts: 987
|
posted May 19, 2009 04:27 PM
Keep it as cool as possible. Any heat will make the oxygenated properties disappear pretty quick. Once you open the can good luck from there. IT SMELLS and my wife is ready to kick me out because my whole house smells like it.
|
|
|
HOME
NEW TOPIC