LLcooljebb
Expert Class
Upgrade I Must
Posts: 146
|
posted May 10, 2009 08:16 PM
quote:
I just got my engine builds, it is making a 194 Hp on pump gas. I weight 178 pound and my gearing is 16/43 is that to much gearing. It has bent raining, I can not get to the track.
The Bike is a 06' ZX14
Just installed a Flux Capacitor on my 06 ZX14. Unable to run on a dyno or at the track due to the risk of time travel and possible rain in the past/future. Any idea on gearing...mph in the 80's becomes an issue! Any questions pertaining to the Flux Capacitor should be directed to Doc Brown!
____________
"no time to be void or save up on life
you got to spend it all.."
  
|
Matt D
Parking Attendant
Posts: 30
|
posted May 13, 2009 02:15 AM
FYI, Supersport gearing is 17/40
____________
2007 ZX14
|
Nelson Taylor
Zone Head
Posts: 927
|
posted May 17, 2009 08:53 AM
Kaw Man,
You been to the track yet?
Im interested to see some numbers.
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
Kaw Man
Expert Class
Posts: 186
|
posted May 17, 2009 05:50 PM
I went to the track Thur. night . First time on track this year , need practice. But this is What I
ran 1.80 60ft 6.36at121.35 1/8 9.62at148.53
second run 1.67 60ft 6.18 at 121.89 1/8 9.45 at 147.54
third run 1.65 60ft 6.11 at 121.75 1/8 9.38 at 147.67
Going back Tuesday night with Mr9 gas and 16/41 gearing in bike.
The bike is ready but I'm not . Taking it slow.
|
Nelson Taylor
Zone Head
Posts: 927
|
posted May 19, 2009 07:30 AM
Looks like your from your numbers the bike is strong.
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
Shane661
Needs a life
Posts: 11494
|
posted May 19, 2009 08:36 AM
quote:
I went to the track Thur. night . First time on track this year , need practice. But this is What I
ran 1.80 60ft 6.36at121.35 1/8 9.62at148.53
second run 1.67 60ft 6.18 at 121.89 1/8 9.45 at 147.54
third run 1.65 60ft 6.11 at 121.75 1/8 9.38 at 147.67
Going back Tuesday night with Mr9 gas and 16/41 gearing in bike.
The bike is ready but I'm not . Taking it slow.
Where are you at? Those mph numbers seem a bit low...
|
Nelson Taylor
Zone Head
Posts: 927
|
posted May 19, 2009 12:15 PM
His 60ft are slow but the bike still picked up decently. If he can get the short times down to high 1.4's or low 1.5's he will be moving pretty good. The MPH seems down though.
Whats your weight Kaw Man?
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
Shane661
Needs a life
Posts: 11494
|
posted May 19, 2009 12:18 PM
The mph would be right in line with a stock motor, but I would think a little more from a built motor? Maybe the track conditions, elevation, etc. aren't great...
He said 178 lbs...
|
Kaw Man
Expert Class
Posts: 186
|
posted May 19, 2009 05:33 PM
I was looking for more to but I was not doing my job. When I get that 60ft down I think it will go fast. I was told it would run 8.80 at 150+ and He was going to show me the number but it rain Prostar out. He did not make it down tell that Sat. I live near Memphis Tn.
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted May 19, 2009 07:13 PM
If he was late getting the throttle open it will kill mph
|
|
|
HOME
NEW TOPIC