Shane661
Needs a life
Posts: 11494
|
posted May 05, 2009 07:28 AM
3 Hole Links...Measurements?
Does someone have a set of 3 hole lowering links that they can measure? I am interested in the distance between holes, primarily on the lowest setting. I believe most of these links go about 3" lower than stock Max...but I would need to know that as well.
Thanks...
Shane
  
|
bsebastian
Novice Class
Posts: 33
|
posted May 05, 2009 08:22 AM
I don't know if it matters on the brand but I have Diamond Powersports links and they say in Parts Unlimited that the settings are 1.5 and 3 inch. Measured 6 7/8, 7 1/2, and 8 1/16TH center to center of each bolt hole on mine that are sitting here. Don't have stock ones here to go off of. Sorry. Hope this helps!
|
Shane661
Needs a life
Posts: 11494
|
posted May 05, 2009 08:32 AM
Thanks! That is what I needed to know!
|
eb2318
Novice Class
zx14
Posts: 82
|
posted May 05, 2009 08:34 AM
my stock ones are 7in center of hole to center. my lowering links on my bike are 8in center of bolt to center. I have them in the bottom hole and i have 3/12 clearance from tire to stock undertail. Hope that helps you any
____________
i luv my zx14
|
Shane661
Needs a life
Posts: 11494
|
posted May 05, 2009 08:36 AM
Yes, it does. I currently have my adjustable links at 7.75", center to center. I am going to lengthen them a little after getting this info. I have increased clearance with my undertail and fuel pump already.
|
LAB3
Needs a job
Posts: 2977
|
posted May 05, 2009 04:29 PM
Shane I have Muzzy Gold 3 hole links 7" 7.5 and 8" center to center.
|
Shane661
Needs a life
Posts: 11494
|
posted May 05, 2009 07:48 PM
Perfect, I am going to try setting them at 8...
|
|
|
HOME
NEW TOPIC