jessejames82
Zone Head
Posts: 550
|
posted April 30, 2009 08:38 AM
reverse shift pattern on a zx14 with stock rearsets
im looking to reverse my shift pattern on my 14 and was wondering if anyone has made anything or done anything to go motogp style without buy aftermarket rearsets
____________
Orient Express Rider
SuperSport ZX 14
6.000 8th mile
  
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted April 30, 2009 08:51 AM
I haven't seen or heard of anything, would be really interesting to find out!
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Compton
Zone Head
Posts: 969
|
posted April 30, 2009 08:56 AM
would be hard to do without that pivot point.
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted April 30, 2009 09:16 AM
Very true... The shifter bolts directly to the shaft huh... I haven't payed attention to a zx14 with aftermarket rearsets, but they still don't give the shifter a pivot point do they?
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Compton
Zone Head
Posts: 969
|
posted April 30, 2009 09:47 AM
no, aftermarket sets like the vortex allow GP shift. they goto a conventional rear set with shift shaft and pivot joint.
____________
b.w.
zx14, little longer, little louder, little lower.
08 Busa, just a little longer and louder and lower than the 14
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted April 30, 2009 10:46 AM
Trac had vortex sets on sale for $250 a while back....
I think thats the cheapest way you will find....
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
14nooby
Zone Head
Posts: 987
|
posted April 30, 2009 01:59 PM
Not possible. I want the same thing but dont want to splurge for the new rear sets. Try the linkage off of a 600 or 1000 and see if it fits. You might be able to do that.
|
jessejames82
Zone Head
Posts: 550
|
posted April 30, 2009 02:19 PM
well i cant afford to right now im just having trouble shifting it seems i run a real good 60ft...like 1.52 but then miss a gear.... i had some trouble last nite i ran 6.09 twice but both times missed a gear...im trying to run supersport..so i am saving my pennies for the motor...and BTW u have to buy an aftermarket kickstand also it wont fit with the stock one
____________
Orient Express Rider
SuperSport ZX 14
6.000 8th mile
|
lacloudchaser
Parking Attendant
Posts: 3
|
posted May 02, 2009 08:04 AM
Im installing the vortex rear sets on my 2007 ZX, too many shift erors on the track going back and forth, ran in to a snag that I will work around (any suggestions from those that have this set up)...
The welded rod on the kickstand mounting frame that secures the recoil spring of your stand is right inline with the shift rod when you invert the shift knuckle for GP config!!! There are a few work arounds, none that I'm crazy about doing , but its raiing all friggin wek on the east coast so if anyone's dealt with this, please let me know!
Drew
|
lacloudchaser
Parking Attendant
Posts: 3
|
posted May 02, 2009 08:04 AM
typin fast, excuse the missssspelllls
|
BLK ICE
Pro
we'll leave the light on for u
Posts: 1709
|
posted May 03, 2009 07:11 AM
Use a quick shifter, if it is allowed in supersport.
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
|
|
|
HOME
NEW TOPIC