750 turbo
Expert Class
Posts: 252
|
posted April 08, 2009 03:34 PM
Piston kits
Where is the best place to buy a 1418 piston kit for a 2006 zx14?
  
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted April 08, 2009 06:42 PM
IMO run drop ins with a 4mm crank. its a big pain in the ass to get it bored out because of the mono block/case
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
smokinZX14
Needs a life
Posts: 10197
|
posted April 08, 2009 06:47 PM
quote:
IMO run drop ins with a 4mm crank. its a big pain in the ass to get it bored out because of the mono block/case
+1 Screw boring it ... do a 4 mill stroker with drop in pistons ...I'll take stroke over bore anyday ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Bawls
Needs a job
re-learning to ride
Posts: 2701
|
posted April 08, 2009 08:35 PM
Hey lee... How reliable is a 4mill for street use? Also, what all do you have to do for it? Headwork, cams, springs, and a lockup?
____________
Best 60ft: 1.42
Best 1/8th: 5.97
Best 1/8th MPH: 119
Brockland Police Badge # 001
|
SteddyTeddy
Pro
Posts: 1664
|
posted April 09, 2009 04:27 AM
 Edited By: SteddyTeddy on 9 Apr 2009 12:27
http://www.bikeland.org/board/viewthread.php?FID=27&TID=45985&set_time=1239243474
|
|
|
HOME
NEW TOPIC