01smokes
Needs a job
Posts: 2243
|
posted March 13, 2009 08:17 PM
nitrous ?
has anyone put there nozzles in the inspection plates of the air box???
If so how did it work out for you?
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
  
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted March 13, 2009 09:14 PM
the best route is in the ram air tubes for good mixing, or a rail with a nozzle for each intake velocity stack .
The important issue is equal N2O charge to each cylinder
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
01smokes
Needs a job
Posts: 2243
|
posted March 13, 2009 09:21 PM
quote:
the best route is in the ram air tubes for good mixing, or a rail with a nozzle for each intake velocity stack .
The important issue is equal N2O charge to each cylinder
Ya i was thinking about that after i installed the kit, i did with them in the inspection plate but i have not sprayed it yet
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
kaw-rick
Pro
Posts: 1167
|
posted March 14, 2009 04:53 AM
quote:
has anyone put there nozzles in the inspection plates of the air box???
If so how did it work out for you?
Yes that works great.
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted March 14, 2009 10:28 AM
i really doubt you would get even distribution with the inspection plate method. may work ok on small shots, but i wouldnt run more than 20 hp that way personally. go with the ram air tubes or direct port
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted March 14, 2009 11:48 AM
quote:
i really doubt you would get even distribution with the inspection plate method. may work ok on small shots, but i wouldnt run more than 20 hp that way personally. go with the ram air tubes or direct port
+1
better to be safe than sorry
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
|
|
HOME
NEW TOPIC