dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted February 17, 2009 07:28 PM
zx14 rear axle Inside diameter?
Can anyone give me the ID of the stock rear axle?
Preferably with a vernier caliper.
I sold mine so I can't measure it.
Thanks,
Lyle
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
  
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted February 17, 2009 07:30 PM
LOL I need to know this as well!
|
masszx14
Pro
A mind beside itself!
Posts: 1806
|
posted February 17, 2009 08:20 PM
it's 19.5 mm (measured on the sprocket side)
and 16 mm inside of the threads (axle nut side).
My caliper is acurate
____________
universal@mind
|
kawasakijockey
Pro
Posts: 1876
|
posted February 17, 2009 08:33 PM
.767 on the chain side and .625 on the rotor side according to my calipers.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted February 17, 2009 09:40 PM
 Edited By: dubious on 18 Feb 2009 06:13
Thanks guys! 
appreciate it.
Bently the Mac zx14 axle ID is .610" or 15.6 mm in each end.
if the Pit bull insert is smaller than my dimensions your good.
can you machine down the inserts if necessary?
LMK
Lyle
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
|
|
HOME
NEW TOPIC