eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted February 16, 2009 08:01 AM
air shifter box
I bought a air shifter used and the box is bad on it. Anyone have any adeas on one to replace it with? The cheaper the better! Thanks
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
  
|
Shane661
Needs a life
Posts: 11494
|
posted February 16, 2009 08:04 AM
Cycle-Tek. I use one on my 14.
Cheap, and good service.
Shane
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted February 16, 2009 08:18 AM
Phone numb for cycle tek?
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted February 16, 2009 09:25 AM
 Edited By: dubious on 16 Feb 2009 18:34
I have a used Muzzy digikil available!
It has the muzzy horn harness and switch too.
$100 shipped
4 wires to plug in and go!
eldubois@telus.net
403-850-2539
Lyle
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
NINJA12
Needs a job
Posts: 3310
|
posted February 16, 2009 11:46 AM
use the PC usb as your kill box.
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted February 16, 2009 12:02 PM
you mean the hub... the pc doesn't have a relay actuator, then you need a relay and the wiring
didn't like that route much, delay and kill are not independant
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
|
|
HOME
NEW TOPIC