StrokedOutZX14
Novice Class
Saving for a turbo by tax time
Posts: 55
|
posted July 29, 2008 04:00 PM
Video Of my ZX14 on the lot, to the 1530cc monster it is today
From the day I bought it off the lot, till today, bored, stroked, and repainted
____________
07 ZX14 Stroked to 1530cc
Muzzy 5mm Stroker Crank, 86mm JE Pistons, Carillo Connecting Rods, Muzzy Billet Cams, Muzzy Valve Springs, Rings, Pins, Clips.
Muzzy M10 Exhaust
K&N Air Filter
Power Commander 3 With Ignition Module.
Secondaries Removed
   
|
ratbyk
Expert Class
Posts: 179
|
posted July 29, 2008 04:32 PM
Very impressive, congratulations on the effort and the result.
Now watch out for those concrete curbs!
|
shane661
Needs a life
Posts: 11494
|
posted July 29, 2008 04:38 PM
 Edited By: shane661 on 29 Jul 2008 17:39
Hey man. I'm a little confused. I read your post on 7/4:
"Well I went to a local bike event and there was a mobile dyno on site and figured what the hell. Before I tell you the results, let me tell you whats done to the bike.
K&N Air filter,
Power commander 3,
Ignition module,
Muzzy M10 Full Exhaust,
Ivan's TRE"
But now it is a 1530 stroker motor with 256 hp?
Enlighten us....
|
StrokedOutZX14
Novice Class
Saving for a turbo by tax time
Posts: 55
|
posted July 29, 2008 04:50 PM
Edited By: StrokedOutZX14 on 29 Jul 2008 18:00
the Dyno crap was done in like January when i put the 2 brothers on. I believe i even wrote it was a forty degree night. not many of them here in florida in june or july. i posted that in july cause someone was talking about mobile dyno's and i was talking about a bad experience. I didn't say it was recent, i was just telling a story. hp and torque meet usually around 5252rpm's, when you have more horsepower then torque on a high rpm motor, then the dyno is usually not reading rpm's.
____________
07 ZX14 Stroked to 1530cc
Muzzy 5mm Stroker Crank, 86mm JE Pistons, Carillo Connecting Rods, Muzzy Billet Cams, Muzzy Valve Springs, Rings, Pins, Clips.
Muzzy M10 Exhaust
K&N Air Filter
Power Commander 3 With Ignition Module.
Secondaries Removed
|
smokinzx14
Needs a life
Posts: 10197
|
posted July 29, 2008 05:24 PM
Edited By: smokinzx14 on 29 Jul 2008 18:26
StrokedOutZX14 I need to get my bike on the dyno , can you give me the name and number of the guys that did your stroker motor dyno work ... Thanks ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted July 29, 2008 05:49 PM
who did your motor work? i've been looking at some muzzy kits....
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
StrokedOutZX14
Novice Class
Saving for a turbo by tax time
Posts: 55
|
posted July 29, 2008 06:17 PM
i'll send it to you big and smokin when i get back to the house, I'm on a mobile, and don't wont to just post it to the public cause it's my dad's number. he's always looking for side work. He's a certified diesel mechanic for mack trucks.
____________
07 ZX14 Stroked to 1530cc
Muzzy 5mm Stroker Crank, 86mm JE Pistons, Carillo Connecting Rods, Muzzy Billet Cams, Muzzy Valve Springs, Rings, Pins, Clips.
Muzzy M10 Exhaust
K&N Air Filter
Power Commander 3 With Ignition Module.
Secondaries Removed
|
smokinzx14
Needs a life
Posts: 10197
|
posted July 29, 2008 06:17 PM
StrokedOutZX14 Looking at the dyno chart it shows an air fuel ratio of 15.1 ...Better get them to fatten that thing up to 12.9 to 13.1 or it's going to have a melt down real fast .. It's at 15 .1 now , just think what it's going to be with the ram air ... The dyno chart also shows a 4 Deg advance , i hope with them 13.5.1 J&E pistons you are running some very good fuel like 101 or better..
Smokin ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
RyuNinja14
Expert Class
Posts: 142
|
posted July 29, 2008 09:20 PM
Bikes looks great! Good choice of music for the video 
|
702fowler
Novice Class
Posts: 64
|
posted July 29, 2008 11:27 PM
Bike looks great and glad youre ok after the spill. The cams you said were muzzys? Wierd. in your video of your bike you show pics from factorypro.com . its the installation of the cam (intake only) manufactured by megacycle. the work was done by mark salvisburg. The pics you took from the website are of MY BIKE!!!!!!!!! You can even read the cam card in your video. Factory pro used my bike to develop : 1. Teka box. a fuel management system.somewhat like a power commander 2. The cam in you picture is a drop in cam made by megacycle for factory pro. 3 the velocity stacks. There are 2 different sets available from them. both of witch were developed on MY bike. The pic of the trans work is from the install of a shift star. the guy in the pic is named raul. I just love the spike oil cap. especially when i put it on.
Go to factorypro.com click products; kawi; scroll to 1400; on the right side you will see a link marked k 96 that will put you on the build page of MY bike. Im not sure how to post a link directly to it.
Again glad you are ok and walked away from the spill. Glad you like my bike too
____________
how do you spell relief ?
G U M B A L L !
|
nczx14
Expert Class
Posts: 108
|
posted July 30, 2008 01:30 AM
Stroked looks like you got busted. I saw the exact same pics on FactoryPro's site also.
____________
2K7 everything possible without going in the engine.
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted July 30, 2008 03:33 AM
WTF?
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
lowcel
Expert Class
Happy on 2 wheels.
Posts: 157
|
posted July 30, 2008 03:52 AM
____________
2007 Z14 SE - Yoshimura TRC full race exhaust w/ carbon can - PCiii w/ map from HPC - Flies removed - Pipercross air filter - Speedohealer - Puig Double Bubble - Fender Eliminator - GPR Steering Damper - Puig Frame Sliders - HID's - Halo's
|
madboost
Expert Class
Posts: 187
|
posted July 30, 2008 04:24 AM
i knew it all along that this guy was a douchebag.
1st his dyno experience was some crap story
2nd he hit a cement parking lot bumper that fell out from the back of the truck
3rd he got a hedious paint job with while sidewall letters.
now this wow
____________
08 zx14-with a few things.
94z28 383,TH400,YSI,9",DFI and much more
9.44@144 w 1.5060ft
|
smokinzx14
Needs a life
Posts: 10197
|
posted July 30, 2008 05:01 AM
I saw this coming ..........I was hoping it would go a little longer and deeper before someone raised the bull shit flag ... Oh well cats out of the bag........
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
SteddyTeddy
Pro
Posts: 1664
|
posted July 30, 2008 05:10 AM
Better grab a front row seat for this. Anybody bring something to drink?
|
smokinzx14
Needs a life
Posts: 10197
|
posted July 30, 2008 05:13 AM
quote:
Better grab a front row seat for this. Anybody bring something to drink?
I got the Root Beer and someone should be along with the Tar and Feathers soon ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
nightmare
Pro
ACP Racing
Posts: 1797
|
posted July 30, 2008 06:34 AM
You guys are mean! Now slide over Lee and Teddy. I got a cooler and it's full of ice!
____________
2006 ZX14 Ninja "SWINE FLU"
60ft 1.23
8th Mile 5.16
ACP Racing
|
ghostman
Expert Class
Posts: 456
|
posted July 30, 2008 06:49 AM
. . . . . . . . . . . . . . . . . 
____________
I'm There Whether You See Me Or Not.
|
nightmare
Pro
ACP Racing
Posts: 1797
|
posted July 30, 2008 07:26 AM
Come on stroked! Here is your chance to set it straight! Or you can  cause you got caught!
____________
2006 ZX14 Ninja "SWINE FLU"
60ft 1.23
8th Mile 5.16
ACP Racing
|
bawls
Needs a job
re-learning to ride
Posts: 2701
|
posted July 30, 2008 07:54 AM
dun dun duuuuuuuuuuh
____________
Best 60ft: 1.42
Best 1/8th: 5.97
Best 1/8th MPH: 119
Brockland Police Badge # 001
|
billeason
Zone Head
Posts: 711
|
posted July 30, 2008 08:09 AM
That's why i asked him to share the street manners of that stroker,I wanted to see if his ran any longer for a commuter then most. I have to admit i did not think anyone would go to all this trouble and to what ends? Nouthing surpizes me anymore.......
____________
bill eason
|
702fowler
Novice Class
Posts: 64
|
posted July 30, 2008 08:51 AM
hey stroke... your bike is an 07 special ed white right? if you are going to steal pics and claim work done to your bike at least be smart enough to steal pics that are the same color as your bike! as you can see in your pics all the pics of the engine work the bike is black. just like mine!!!!! or did you paint yours black after you wrecked it and then back to white when it was ready for the road?
____________
how do you spell relief ?
G U M B A L L !
|
nczx14
Expert Class
Posts: 108
|
posted July 30, 2008 09:04 AM
quote:
hey stroke... your bike is an 07 special ed white right? if you are going to steal pics and claim work done to your bike at least be smart enough to steal pics that are the same color as your bike! as you can see in your pics all the pics of the engine work the bike is black. just like mine!!!!! or did you paint yours black after you wrecked it and then back to white when it was ready for the road?
The how to section on their site even gives credit to this dude Stroked.
____________
2K7 everything possible without going in the engine.
|
shane661
Needs a life
Posts: 11494
|
posted July 30, 2008 09:05 AM
Edited By: shane661 on 30 Jul 2008 10:08
This is getting to be a little like the Alien Autopsy video, so here's another mistake. The picture shown of the stroker kit is from a ZX-12. It's the 1394 kit from APE:
If nothing else, I commend this as a purely fantasy work. I see the video has been removed now....
Shane
|
|
|
HOME
NEW TOPIC