Wheelie
Needs a life
Old Man
Posts: 6902
|
posted November 17, 2007 05:35 PM
 Edited By: Wheelie on 17 Nov 2007 17:50
Matt and Wheelie @ Kennedale Vids
Not a great turn out, but it was still fun, Matt (dont know your username) finally got his 14 in the 5's after this pass, he hit some 5.92's, hard to get video when riding. lol my BlackCow got a couple of 5.89's. Saw one 08 Busa, needed a good rider, 6.8's@113mph. Matt send me your emaill address and I can send you all the videos I got of you. mrwheelie@tx.rr.com wee
1100rr.com/MFZX14.wmv
1100rr.com/Kennedale5.89.wmv
  
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted November 17, 2007 05:41 PM
Edited By: Wheelie on 17 Nov 2007 17:41
oh yeah, Lucky14 showed up as well as RichCraft1 (spectpotators), that Blue sparkle zx14 looks good! wee
|
stevewfl
Moderator
Posts: 27920
|
posted November 17, 2007 05:51 PM
great video's...thanks!
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
Old Scholl Cubed
Parking Attendant
Posts: 28
|
posted November 17, 2007 06:41 PM
We were out at Kennedale today, great weather and lots of street bikes. Did you guys see the old school 750 running low 5s ??? That little bike was sick !!!!
____________
Old Scholl rulz
|
KillaKAW4Life
Expert Class
Posts: 348
|
posted November 17, 2007 08:01 PM
Tried to make it but had the lil one.
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted November 17, 2007 08:51 PM
Edited By: Wheelie on 17 Nov 2007 20:51
quote:
We were out at Kennedale today, great weather and lots of street bikes. Did you guys see the old school 750 running low 5s ??? That little bike was sick !!!!
The 2 stroke? He said it run's 5.15 with his rider on it. what were ya'll riden? wee
|
Silver08
Expert Class
Posts: 461
|
posted November 17, 2007 09:02 PM
wheelie, nice vids, this is RR_Monster from 1000rr.net.
how long are those bikes?
____________
08 ZX14
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted November 17, 2007 09:19 PM
Edited By: Wheelie on 17 Nov 2007 21:20
quote:
wheelie, nice vids, this is RR_Monster from 1000rr.net.
how long are those bikes?
64" both bikes are identical except for the exhaust, same gearing, air shifters, same chip. wee
|
Silver08
Expert Class
Posts: 461
|
posted November 17, 2007 09:37 PM
what extentions are those, roaring toyz? I weigh about 210 unsuited, how long should i go and what gearing, 16/43? If the roaring toyz are set all the way back it should be 65.5in, is that too much?
do you have any more vids/pics?
____________
08 ZX14
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted November 17, 2007 09:44 PM
quote:
what extentions are those, roaring toyz? I weigh about 210 unsuited, how long should i go and what gearing, 16/43? If the roaring toyz are set all the way back it should be 65.5in, is that too much?
do you have any more vids/pics?
yes, they are roaring toyz, im also 210lbs. im running 16-44 and its not enough, I will be running 16-47. you need some space on the swingarm for chain adjustments. wee
|
smokinzx14
Needs a life
Posts: 10197
|
posted November 17, 2007 09:53 PM
Cool wheely !!!
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted November 17, 2007 09:56 PM
Smokin, the Boyz didnt show up. wee
|
smokinzx14
Needs a life
Posts: 10197
|
posted November 17, 2007 10:06 PM
quote:
Smokin, the Boyz didnt show up. wee
Maybe they were hidding in the bushs...LOL  Good job Wheelie on that 5.80 pass !!!!!
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
mwrzx12
Expert Class
Posts: 115
|
posted November 17, 2007 10:17 PM
Great videos!! Thanks for sharing.
|
smokinzx14
Needs a life
Posts: 10197
|
posted November 17, 2007 10:19 PM
Wheelie here is a link to the post about the 08 busas coming to put some smack down on all the 14s that would show up ... lol....
http://www.hayabusa.org/forums/?act=ST;f=77;t=83484;st=0;r=1;
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Old Scholl Cubed
Parking Attendant
Posts: 28
|
posted November 18, 2007 04:52 AM
We were hanging around with House and O'shea, just doing some spectating, it was a great day to hang out at the track.
____________
Old Scholl rulz
|
lucky14
Pro
Posts: 1439
|
posted November 18, 2007 06:10 AM
quote:
Wheelie here is a link to the post about the 08 busas coming to put some smack down on all the 14s that would show up ... lol....
http://www.hayabusa.org/forums/?act=ST;f=77;t=83484;st=0;r=1;
And here's what Mr. StirringThePot said over there:
Well what happened ??? Wait wait i know what happened, i just got the info from two people that saw the hole thing ..One zx14 ran 5.80s and one ran 5.90s and the 08 Busas that was going to lay some smack down on the zx14s ran....Drum roll please ................ 6.8's@113mph ....
ROFL!!! 
We should see a response soon, complete with 1000 excuses......................
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted November 18, 2007 07:04 AM
Did the Busa go 6.80's or the rider? They way I read his post in the link smokin posted, he even had exhaust. Sad. Lucky are you going to run your bike? and if so what set-up.
|
smokinzx14
Needs a life
Posts: 10197
|
posted November 18, 2007 07:13 AM
quote:
Did the Busa go 6.80's or the rider? They way I read his post in the link smokin posted, he even had exhaust. Sad. Lucky are you going to run your bike? and if so what set-up.
You bet it was all rider ...These guys should not have called out anyone till they learn to ride ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
smokinzx14
Needs a life
Posts: 10197
|
posted November 18, 2007 07:34 AM
quote:
quote:
Wheelie here is a link to the post about the 08 busas coming to put some smack down on all the 14s that would show up ... lol....
http://www.hayabusa.org/forums/?act=ST;f=77;t=83484;st=0;r=1;
And here's what Mr. StirringThePot said over there:
Well what happened ??? Wait wait i know what happened, i just got the info from two people that saw the hole thing ..One zx14 ran 5.80s and one ran 5.90s and the 08 Busas that was going to lay some smack down on the zx14s ran....Drum roll please ................ 6.8's@113mph ....
ROFL!!!
We should see a response soon, complete with 1000 excuses......................
...Only thing i hear over there are Crickets .....lol....
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
tg1820
Expert Class
Posts: 199
|
posted November 18, 2007 08:46 AM
Awesome times. I going need some coaching. What kind of mph were you guys running with the 16/44 gearing. I am 210 unsuited. I am just looking for what would be a good gear to start with. Great job!!!
TG
|
Halvefast
Zone Head
Posts: 806
|
posted November 18, 2007 09:11 AM
Edited By: Halvefast on 18 Nov 2007 09:13
Wheelie- sweet vids, glad to see you hung onto the black cow
Come on down to SAR Dec. 7-8 two days of bike racing, plenty of busas to pick on 
TG- 16/44 is not going to work well at all on your turbo.
Hell I bet you'll blow thru stk gearing pretty quick
____________
Texas Mile 200.256mph - Oct. 2007 (Update 202.577mph Oct 2008) NOS assisted
ECTA Ohio Mile 195.132mph
TexasMile 2012 199.9 mph all motor!
Streetriders Shootout 2008 series Pro/ET Champ!
Streetriders Shootout 2007 Series Pro/ET Runner-up!
|
tg1820
Expert Class
Posts: 199
|
posted November 18, 2007 09:25 AM
TG- 16/44 is not going to work well at all on your turbo.
Hell I bet you'll blow thru stk gearing pretty quick
It is unreal! But that does not change the fact I will have to get a good 1/8 mile to make a good pass in the 1/4! I need to find a gear low enough to get a good 1/8 but not so low that I run out of gear in the 1/4! What kind of 1/4 mph are you guys running with the 16/44 and in what gear and RPM is it going through the traps. I am thinking of starting with 17/44 and working from there. I suspect that with the tranny gear ratio's will want a lower gear than you might think.
I am not trying to high jack this thread I just know you, wheelie and several others on here have already chased their gearing. I just want to get the 1/8th down first and then we can worry about the 1/4! Any help will be greatly appreciated!
TG
|
duliz
Parking Attendant
Posts: 8
|
posted November 18, 2007 09:37 AM
Edited By: duliz on 18 Nov 2007 09:38
Awesome run Mr. WEEEEEEEEEEEEEEEEEEEEEEE. Last time I went your best time was 6.16 not extended. Congratulations
|
lucky14
Pro
Posts: 1439
|
posted November 18, 2007 01:39 PM
quote:
Did the Busa go 6.80's or the rider? They way I read his post in the link smokin posted, he even had exhaust. Sad. Lucky are you going to run your bike? and if so what set-up.
The Busa rider actually was a *decent* rider - not a pro, but not a newbie either.
I hope to run "soon" whatever that is. Didn't work out yesterday, was pretty sure I was going today and other things came up............................ If family and work didn't get in the way.................... J/K LOL!
The good news is that the tracks here are open year-round , depending on the weather on the specific day. I would like to run it "showroom stock" or maybe just a strap, then add exhaust and PC. It will probably stay at stock WB, as I enjoy the backroads near me, maybe more than drag racing, 'cause they're always open.................
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
|
|
HOME
NEW TOPIC