brent davis
Zone Head
Posts: 504
|
posted October 29, 2007 07:16 AM
How much for a '06 ZX-14???
I am willing to part ways with the '06 as iswhich includes:
2400 miles
Brock SMEG that I modified to sit lower than the original SMEG(see photo)
PC with Brock maps
Muzzy air-shifter kit
Roaring Toyz extensions sitting at 64"
16/43 gearing
High flow air filter
smoked turn signals
painted foreman grills
Chromed stock wheels
Shinko 200 U-soft rear
Shinko front tire
Front strapped
Muzzy rear lowering links
Custom cut down stock seat
smoked windshield
ALL STOCK PARTS COME WITH THE BIKE TOO
Problem is, a good price to settle on for the bike with parts. My dealership is saying no more than $7500 with/without mods. LMFAO.
"OR" I can take everything off and put all the stock parts back on.
How much as is and how much with all stock parts put back on?
modified SMEG that I modified to sit lower....kinda like the Alien Head pipe
Stock 14 fender
ZX-10 fender
____________
Black '06 ZX-14
  
|
stevewfl
Moderator
Posts: 27920
|
posted October 29, 2007 07:23 AM
Maybe this will assist you, here's an '06 with low miles and mods for sale:
http://www.bikeland.org/board/viewthread.php?FID=3&TID=35095&set_time=
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
duncan
Expert Class
Posts: 341
|
posted October 29, 2007 07:34 AM
Thats an absolutely beautiful bike, how much do you want for it as is?
|
brent davis
Zone Head
Posts: 504
|
posted October 29, 2007 07:58 AM
DAMN stevewfl.....................fuk that. That is waaaaaaay too low of a price for me plust that is in Canada. LMFAO AGAIN!
duncan, that is why I posted it up to see what I may beable to get out of it. I want a '08 bike now and will either take my '06 back to stock or sell as is.
____________
Black '06 ZX-14
|
stevewfl
Moderator
Posts: 27920
|
posted October 29, 2007 08:05 AM
hey I didn't price it I just saw it
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
brent davis
Zone Head
Posts: 504
|
posted October 29, 2007 08:28 AM
quote:
hey I didn't price it I just saw it
Oh I know, I am just in awe of that price as well but there's no way I can let mine go like that.
____________
Black '06 ZX-14
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted October 29, 2007 08:28 AM
sold already of course!
for $5700 yet.
Unreal he had $5700 in parts!
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
brent davis
Zone Head
Posts: 504
|
posted October 29, 2007 08:33 AM
quote:
sold already of course!
for $5700 yet.
Unreal he had $5700 in parts!
I hope the guy that bought it checked the VIN. I know of a guy that bought a bike from a SHOP and to later found out the bike was stolen.
____________
Black '06 ZX-14
|
duncan
Expert Class
Posts: 341
|
posted October 29, 2007 08:45 AM
I'll buy your bike for $5700, maybe $5800. Just kidding, lol!
|
brent davis
Zone Head
Posts: 504
|
posted October 29, 2007 08:51 AM
quote:
I'll buy your bike for $5700, maybe $5800. Just kidding, lol!
LOL. you so crazy!
____________
Black '06 ZX-14
|
johnsonzx14
Expert Class
Posts: 487
|
posted October 29, 2007 02:17 PM
how much for the fender and brackets?
|
Brent Davis
Zone Head
Posts: 504
|
posted October 29, 2007 02:57 PM
quote:
how much for the fender and brackets?
$10,000.00
____________
Black '06 ZX-14
|
BlackMagic14
Needs a job
Posts: 2058
|
posted October 29, 2007 07:42 PM
I will take 12.5k for mine with the ceramic coated SMEG, PCIII, Air Shifter, NItrous, BMC FIlter,Extensions set at 64in, New Vortex sprockets 16/44, two seats one cut to hide the nitrous bottle, New Shinko on the back pilot power on the front, All the red dress up parts inluding axle mount billet LP bracket in candy red fork caps in candy red, steering stem nut in candy red, candy red chain gaurd, candy red heel gaurds, candy red spike bar ends, candy red oil fill cap, candy red brake and clutch resevoir caps... Oh wait I forgot the big stuff!!! Carpenter Racing Ported head milled to bump compression with degreed cams well over 200 HP on motor almost 260 HP on nitrous bike has been (i cant believe I am about to tell you guys this) 8.30's on nitrous with a 170 pound rider best motor pass 8.52
Oh yeah I forgot a few things it has a puig red windscreen side grills off a LE that match the candy red dress up stuff and it has a Custom billet oil pan that gives an extra 1.5 inches of ground clearance price is FIRM!!!! I dont really want to sell it but If I can get 12.5 out of it I will let it go to get the new 08 LE
bike is filthy in the pics but it cleans up nice no scratches has never been down and has a little over 8000 miles
|
stevewfl
Moderator
Posts: 27920
|
posted October 29, 2007 08:15 PM
if you part it gimmie first dibs on the ceramic full exhaust. or trade for some cash and my brocks gen3 carbon full exhaust
my porn star nipple red 14 would look great with all that flat black!
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted October 30, 2007 02:10 AM
I think realisticly you can expect to get between 8000 and 8500. I sold mine for 8800 with 4500 miles and Brocks smeg and lowerd. But that was before the updated 08 was released.
Black magic even with your work done I think you will have a hard time pulling 11,000.
|
Cajunboyz
Zone Head
Posts: 702
|
posted October 30, 2007 03:39 AM
 Edited By: Cajunboyz on 30 Oct 2007 06:31
quote:
I am willing to part ways with the '06 as iswhich includes:
2400 miles
Brock SMEG that I modified to sit lower than the original SMEG(see photo)
PC with Brock maps
Muzzy air-shifter kit
Roaring Toyz extensions sitting at 64"
16/43 gearing
High flow air filter
smoked turn signals
painted foreman grills
Chromed stock wheels
Shinko 200 U-soft rear
Shinko front tire
Front strapped
Muzzy rear lowering links
Custom cut down stock seat
smoked windshield
ALL STOCK PARTS COME WITH THE BIKE TOO
Problem is, a good price to settle on for the bike with parts. My dealership is saying no more than $7500 with/without mods. LMFAO.
"OR" I can take everything off and put all the stock parts back on.
How much as is and how much with all stock parts put back on?
modified SMEG that I modified to sit lower....kinda like the Alien Head pipe
Stock 14 fender
ZX-10 fender
Brent Davis, Where are you located & whats your price for the bike as it sits withthe stock parts??
____________
"Cajun Boyz with Bad Ass Toys"
|
brent davis
Zone Head
Posts: 504
|
posted October 30, 2007 05:17 AM
BlackMajic, man that is a stout bike on motor. How much was it to get the head ported? I just may keep my fuggin' bike becvause ppl think you are going to give your chit away for cheap. I talked to Terry @ Mr. Turbo and he is a VERY cool person to talk with about his kits and I just may go that route and keep the bike. I mean I am hyped about the '08 ZX-14 but heck, with a turbo kit on ANY bike and makign 260 HP, who needs to keep upgrading?
____________
Black '06 ZX-14
|
Cajunboyz
Zone Head
Posts: 702
|
posted October 30, 2007 05:34 AM
Hey, Black Magic, that 8.52 et, was that with just a carpenter milled & ported head? or is there aftermarket cams with this package??
____________
"Cajun Boyz with Bad Ass Toys"
|
Nelson Taylor
Zone Head
Posts: 927
|
posted October 30, 2007 06:10 AM
Brent I would keep your bike if I were you.
"Its one of a kind". and I cant see you just giving it away. $7500 hell no
This time of year the price on bikes go way down.
Thats how I bought mine cheap last year.
I'm also interested in putting some more money into my bike to get it above the 200hp mark.
Come on Black Magic "lettuceknowsumpin".
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
smokinzx14
Needs a life
Posts: 10197
|
posted October 30, 2007 07:10 AM
Edited By: smokinzx14 on 30 Oct 2007 08:17
quote:
BlackMajic, man that is a stout bike on motor. How much was it to get the head ported? I just may keep my fuggin' bike becvause ppl think you are going to give your chit away for cheap. I talked to Terry @ Mr. Turbo and he is a VERY cool person to talk with about his kits and I just may go that route and keep the bike. I mean I am hyped about the '08 ZX-14 but heck, with a turbo kit on ANY bike and makign 260 HP, who needs to keep upgrading?
Carpenders head and cam package is close to 2700 bucks and i'm sure it will make a lot more HP than a piped and p/c 08 zx14 .... I'm in the same boat as most of you guys .. While i would like a brand new zx14 my 06 is like brand new and without a single mark on it ... I hate to take a big hit on trade in for an 08 zx14 ... For that kind of money i can get a turbo or a head and cams or ? whatever ? ......I'm thinking turbo is by far the best bang for the buck but you lose that sleeper look of a built motor ...A turbo is the in your face don't mess with me mod !!! I can make up my mind on what to do .... Smokin...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
smokinzx14
Needs a life
Posts: 10197
|
posted October 30, 2007 07:16 AM
Brent NO way would i give up my 06 for 5800 bucks like the one listed ....Hell it would kill me to give it away for 8000 !!! But the sad part is that is what people are doing just that ...
One could set back and wait a bit till someone crashes an 08 and buy it like i did my extra zx14 for 3500 bucks , pull the motor and install it in your 06 and bang you have a 08 with 06 body work ...Smokin..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
ninja12
Needs a job
Posts: 3310
|
posted October 30, 2007 07:49 AM
Lots of places to get good headwork for less than $2700.
That carpenter package includes valve springs, ti retainers, and cams. a very nice package.
You could get a y2k head soon, Ace performance, Lee's performance,
4th generations, or cycle concepts to name a few probably have head packages for the zx14. Get the cams now or later depending on $$$.
If you can pull and install the head, you have many options.
|
brent davis
Zone Head
Posts: 504
|
posted October 30, 2007 08:14 AM
I just talked to Mr. Bob Carpenter and he told me for $3100, you get the ported head, new valve springs and titanium retainers along with a modified ZX-12 cam tensioner.
Cajun, money talks man and that is why I started this topic to see what ppl thought I can ask for it. You got a number in mind?
Mr. Turbo also kinda helped me with my thinking of keeping the '06 and adding his kit BUT I wonder did Kaw so called fix the frame issues on the '08 along with the start up cam tensioner noise?
Decision, decisions, decisions.
____________
Black '06 ZX-14
|
Cajunboyz
Zone Head
Posts: 702
|
posted October 30, 2007 08:28 AM
quote:
Lots of places to get good headwork for less than $2700.
That carpenter package includes valve springs, ti retainers, and cams. a very nice package.
You could get a y2k head soon, Ace performance, Lee's performance,
4th generations, or cycle concepts to name a few probably have head packages for the zx14. Get the cams now or later depending on $$$.
If you can pull and install the head, you have many options.
No, I don't, As you can see, I have a fine 06, But I do have a COSE friend whom wants a Black one at a goood price. Factors are where your located?? etc.
____________
"Cajun Boyz with Bad Ass Toys"
|
BlackMagic14
Needs a job
Posts: 2058
|
posted October 30, 2007 09:03 AM
My bike has stock cams. And that 8.52 was with a 1.33 sixty foot time the bike was at 68 inches at the time, but i can tell you the 06 responds very well to having the head done and milled also forgot to mention that i have the little muzzy adjustable timing sprocket with the compression bumped you have to pul timing to spray it... And i really woudnt expect anyone to pay 12.5k for my bike but that is kinda the point I dont really want to sell it.
|
|
|
HOME
NEW TOPIC