gms118
Expert Class
Posts: 258
|
posted July 06, 2007 10:03 PM
Who does Oil Pan Mods????
I just knocked the oil plug into the pan. i need my pan modified. Does anyone know who can do it so that I can still run my smeg. I dont want a sidewinder. Help please!!!
   
|
johnsonzx14
Expert Class
Posts: 487
|
posted July 07, 2007 09:55 AM
Do a search, lots of guys have done it....or had it done rather.. Im looking into getting a pan modified also..
|
BlackMagic14
Needs a job
Posts: 2058
|
posted July 07, 2007 10:23 AM
gms118 Coby addams modifies them for 300 bucks but the one I am having made at RPM should be ready in another week or two and it will work with the SMEG price will be 500 but when they are ready I am going to try to get a group buy going so let me know if you are interested
|
gms118
Expert Class
Posts: 258
|
posted July 07, 2007 02:51 PM
thanks BlackMagic.
|
lietoome
Needs a job
Posts: 2033
|
posted July 08, 2007 01:48 PM
my welder did it for $60. welded a drain plug on the kickstand side, grinded off the 'guard' around the old plug and welded up the old drainplug hole.
take it off and take it to them to save some $ on labor. Order your new gasket now though.
The local dealer ripped his out last Friday night....I warned him when I did mine...
|
johnsonzx14
Expert Class
Posts: 487
|
posted July 08, 2007 02:45 PM
Yeah, if that RPM one doesnt come out soon Im going to get a stock one and modify it.. but black magic said that its going to be pretty bad ass so I might wait..
|
gms118
Expert Class
Posts: 258
|
posted July 08, 2007 06:03 PM
When is RPM going to have it ready. I would like a billet one
|
THEMADKAW
Expert Class
Posts: 211
|
posted July 10, 2007 02:26 PM
schnitz has the adam's pan but it is high $$$$$$$$$! and requires mods
|
MakennaEllen
Novice Class
Posts: 33
|
posted July 10, 2007 02:51 PM
This may be a stupid question on my oart, but how did you manage to knock the plug up into the oil pan?
|
1badzx12r
Needs a life
Posts: 8321
|
posted July 10, 2007 03:19 PM
quote:
This may be a stupid question on my oart, but how did you manage to knock the plug up into the oil pan?
most time its a lower bike..... ive got a 4to1 muzzy pipe protecting my plug.... few bangs on pipe from curbs but never hit plug yet....ain't saying it can't happen but it looks like its gonna need be a left turn with whole lotta lean ....
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
gms118
Expert Class
Posts: 258
|
posted July 10, 2007 04:24 PM
The bike is very low, the plug was the lowest point on the bike. Came up on a wheelie at the track and you can fill in the blanks!
|
gms118
Expert Class
Posts: 258
|
posted July 10, 2007 04:25 PM
And the adams pan requires a sidewinder.
|
countersteer
Needs a job
Didn't read the owners manual
Posts: 2207
|
posted July 10, 2007 08:58 PM
quote:
my welder did it for $60. welded a drain plug on the kickstand side, grinded off the 'guard' around the old plug and welded up the old drainplug hole.
take it off and take it to them to save some $ on labor. Order your new gasket now though.
The local dealer ripped his out last Friday night....I warned him when I did mine...
jeff you got any pics?
____________
Scott
Long Island, New York
2006 ZX-14, 2003 ZX-12R
|
BlackMagic14
Needs a job
Posts: 2058
|
posted July 10, 2007 11:41 PM
I was promised that the pan from RPM would be done before july 28th I plan on racing that weekend and Jason said it would for sure be done before then I am hoping for sometime around the 20th
|
gms118
Expert Class
Posts: 258
|
posted July 11, 2007 08:32 AM
Well if you get one. Let me know how it turns out. I got my stock pan being modified right now. But i want a billet pan.
|
BlackMagic14
Needs a job
Posts: 2058
|
posted July 11, 2007 11:07 PM
I will post pics as soon as it is done if it is anywhere near as nice as there ZX10 pan it will be super trick
|
johnsonzx14
Expert Class
Posts: 487
|
posted July 12, 2007 01:34 PM
awesome, get a group buy going...
|
lietoome
Needs a job
Posts: 2033
|
posted July 12, 2007 05:07 PM
http://www.bikeland.org/board/viewthread.php?FID=3&TID=32918&set_time=1184257927
some of you guys were asking about an extra pan? there's one in the buy sell.
I didn't take any pics because mine looked identical to halvesfast' set up. I'll see if I can find the link i used to have.
|
lietoome
Needs a job
Posts: 2033
|
posted July 12, 2007 05:11 PM
 Edited By: lietoome on 12 Jul 2007 18:14
this is the pic halvefast did of his pan. My welder welded the actual drainplug on the kickstand side. I really like the way his(below) turned out. Rich's set up involved much more welding than mine...my guy just welded up the original drainplug.
|
gms118
Expert Class
Posts: 258
|
posted July 12, 2007 06:51 PM
I think this was done by Drag Bike Direct. And they are the ones doing my pan. If anyone wants there contact info let me know.
|
stu64
Zone Head
Posts: 548
|
posted July 13, 2007 04:21 AM
quote:
I think this was done by Drag Bike Direct. And they are the ones doing my pan. If anyone wants there contact info let me know.
How much are they charging for this?
|
gms118
Expert Class
Posts: 258
|
posted July 13, 2007 02:39 PM
150$
|
johnsonzx14
Expert Class
Posts: 487
|
posted July 13, 2007 03:01 PM
dang, thats cheap....
|
iflyems
Expert Class
Posts: 233
|
posted July 18, 2007 10:17 AM
Got a phone number for RPM??
|
BlackMagic14
Needs a job
Posts: 2058
|
posted July 18, 2007 01:30 PM
RPM's Number870-863-4630 please if you contact them tell them you heard about them from Matt with the Black ZX14 Thanks oh A girl Named Suzzanne will answer the phone she is very friendly and helpfull but you need to speak with Jason
|
|
|
HOME
NEW TOPIC