kawracer
Novice Class
Posts: 94
|
posted May 13, 2007 05:37 PM
Another 8 second 14
I was in the right lane.
  
|
F_Sik
Expert Class
Posts: 121
|
posted May 13, 2007 05:50 PM
if i didnt weigh 280lb i might be able 2 do That
____________
As long as y'all don't have any kryptonite/I'm gonna be alright.
|
F_Sik
Expert Class
Posts: 121
|
posted May 13, 2007 05:51 PM
ya right / good job makn us pride
____________
As long as y'all don't have any kryptonite/I'm gonna be alright.
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted May 13, 2007 06:07 PM
What's your set up?
|
flatoutbu
Pro
Posts: 1054
|
posted May 13, 2007 06:17 PM
hmmm...with that MPH...spray?
____________
06 Blue 14
9.008 at 153mph @ 195 suited
|
kawracer
Novice Class
Posts: 94
|
posted May 13, 2007 06:19 PM
I was testing a wet nitrous system that I installed........ I wanted to get it on the dyno before I took it to the track , but that didn't happen, So I ran a VERY conservative tune-up, I can't wait to get it dialed in....I think it should see some 8 teens or twentys.
|
flatoutbu
Pro
Posts: 1054
|
posted May 13, 2007 06:21 PM
How big a hit..if you dont mind me asking...
____________
06 Blue 14
9.008 at 153mph @ 195 suited
|
blackbullet76
Pro
Posts: 1134
|
posted May 13, 2007 06:42 PM
I'd say about a 40-shot
____________
2007 ZX-14 black
Brocks s-meg exhaust
PCIII w/track map
BMC race filter
Flies removed
16 tooth front sprocket
Speedohealer
APE cam chain tensioner
Vortex rearsets
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted May 13, 2007 06:46 PM
Oh it's bigger then a 40 shot I would say how about 60 to 80 if thats a stock motor, Kawracer fill us in on the wet kit and what kit it is and the rest of your set up
|
flatoutbu
Pro
Posts: 1054
|
posted May 13, 2007 06:49 PM
yea you could hit it with a 40 dry easy...hmm...must be a decent size wet shot for 165 and no tune....yea i'm thinking 60-80 too
____________
06 Blue 14
9.008 at 153mph @ 195 suited
|
smokinzx14
Needs a life
Posts: 10197
|
posted May 13, 2007 06:52 PM
 Edited By: smokinzx14 on 13 May 2007 20:10
Yup must be bigger than a 40 shot with that MPH ...Look at his 60 foot ( 1.50 ) and still ran a 8.54 !!!! I had a 1.40 60 foot and ran 8.56 @ 163 on a 30 dry shot and his numbers Smoked mine ...His MPH is killer !!!! His 135 MPH in the 1/8 mile is an oh shit that was fast ....
WELCOME TO THE 8 SECOND CLUB !!!!!.............. 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
flatoutbu
Pro
Posts: 1054
|
posted May 13, 2007 06:55 PM
looks like he made up alot of ground from the 330 on....and what the hell was he racing that ran a 8.15...that's haul'n ass too for that 60'
____________
06 Blue 14
9.008 at 153mph @ 195 suited
|
blackbullet76
Pro
Posts: 1134
|
posted May 13, 2007 06:56 PM
Wonder what was in the left lane?
____________
2007 ZX-14 black
Brocks s-meg exhaust
PCIII w/track map
BMC race filter
Flies removed
16 tooth front sprocket
Speedohealer
APE cam chain tensioner
Vortex rearsets
|
smokinzx14
Needs a life
Posts: 10197
|
posted May 13, 2007 07:03 PM
quote:
Wonder what was in the left lane?
One fast bike ....lol....
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
kawracer
Novice Class
Posts: 94
|
posted May 13, 2007 07:28 PM
This was the bike in the left lane.
____________
2004 & 2005 PMRA Street E.T. Champion
|
kawracer
Novice Class
Posts: 94
|
posted May 13, 2007 07:48 PM
quote:
Oh it's bigger then a 40 shot I would say how about 60 to 80 if thats a stock motor, Kawracer fill us in on the wet kit and what kit it is and the rest of your set up
It is a kit that I pieced together using cold fusion stuff ( I'm a cold fusion dealer)
also using a schnitz 2 dial progressive controller and the schnitz EFIR-14 to pull the timing out of it.
100 h.p. jetting .026 nitrous .030 fuel
2 dial was set to start at 30% and build to 100% over 5 seconds and I was pulling 8 degrees of timing out of it.
____________
2004 & 2005 PMRA Street E.T. Champion
|
nightmare
Pro
ACP Racing
Posts: 1797
|
posted May 13, 2007 08:59 PM
holy shit that had to be one hell of a ride man! I mean to just pick all of that speed up after running a 1.5 60'. Sounds like one hell of a rodeo! Can't wait to hear what you are putting out on the dyno! I think that I am getting that there is no motor/head work done yet either right? Also, did you replace the valve springs?
____________
2006 ZX14 Ninja "SWINE FLU"
60ft 1.23
8th Mile 5.16
ACP Racing
|
Nelson Taylor
Zone Head
Posts: 927
|
posted May 13, 2007 10:26 PM
Whoa!!!!!
I have to agree with the rest of the guys the back half numbers are blistering.
Congrats!!!!!
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
ZXLNT
Needs a job
Kawpuke Extraordinare
Posts: 2853
|
posted May 13, 2007 10:47 PM
Anytime you can back half 30 mph your doing good.!!!!!
|
nightmare
Pro
ACP Racing
Posts: 1797
|
posted May 13, 2007 11:12 PM
Now I got a question. Just say he would have pulled like a 1.38 60'. What kind of time would he have ran?
____________
2006 ZX14 Ninja "SWINE FLU"
60ft 1.23
8th Mile 5.16
ACP Racing
|
ZXLNT
Needs a job
Kawpuke Extraordinare
Posts: 2853
|
posted May 14, 2007 01:05 AM
.1 on the front half is usually worth .15-.2 on the back..
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted May 14, 2007 02:04 AM
A bike with a well tuned map and nos will pick up 30 mph from the 1/8 to the 1/4. I do it all the time
|
kawracer
Novice Class
Posts: 94
|
posted May 14, 2007 02:09 AM
quote:
I think that I am getting that there is no motor/head work done yet either right? Also, did you replace the valve springs?
Your right stock motor and valve springs.
I'm still working on getting my 60' better......just need more practice!!!!!
I did turn the controller up on one pass.......but the front of the bike started bouncing off of the ground about 200' from the finish line...scared the hell out of me....so I shut it down.
____________
2004 & 2005 PMRA Street E.T. Champion
|
Brent Davis
Zone Head
Posts: 504
|
posted May 14, 2007 03:24 AM
Very nice numbers man. Did you scare the Busa boyz off?......LOL.
BTW, any pics of your bike?
|
ZXLNT
Needs a job
Kawpuke Extraordinare
Posts: 2853
|
posted May 14, 2007 04:28 AM
quote:
A bike with a well tuned map and nos will pick up 30 mph from the 1/8 to the 1/4. I do it all the time
Even without nitrous if your bike is well tuned and has a strong motor..
|
|
|
HOME
NEW TOPIC