HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: flies out for street use or install stacks? NEW TOPIC NEW POLL POST REPLY
icetee


Expert Class
Posts: 132
posted January 27, 2007 03:02 PM        
flies out for street use or install stacks?

I've noticed that a lot of the fellows are taking the flies out,is that and good thing for street use with sometimes going to the track or is it better to just buy the stacks...I know with the stacks you should improve the mid-range....I need the mid-range weigh over 250....
____________
THE VIEW FROM THE REAR NEVER CHANGES,UNLESS YOUR IN THE FRONT!

  Ignore this member   
dbeadling


Zone Head
Posts: 699
posted January 27, 2007 04:24 PM        
flies out ......power commander and 16 tooth = new beast and killer midrange
  Ignore this member   
Tool man


Needs a job
Posts: 4493
posted January 27, 2007 06:17 PM        
quote:
flies out ......power commander and 16 tooth = new beast and killer midrange


+++1
____________
The banks are failing..
The banks are failing...
Invest in Ammo

  Ignore this member   
BlackMagic14


Needs a job
Posts: 2058
posted January 27, 2007 08:30 PM        
+2
  Ignore this member   
blackbullet76


Pro
Posts: 1134
posted January 28, 2007 09:00 AM        
I was worried about the flys out on the street too, but I did it and it's very smooth. You will need more throttle control in the curves though. A tiny little twist on the throttle and it will accelerate, unlike it is with the flys in. I won't be putting mine back in
  Ignore this member    Click here to visit blackbullet76's homepage. 
icetee


Expert Class
Posts: 132
posted January 28, 2007 09:08 AM        
thanks for the info bullet76...was it a big deal getting the flies out? It seems like I can save money by just taking the flies out. instead of buying the stacks.... that will free-up some money for the pipe...by the way what pipe did you choose for your bike?
____________
THE VIEW FROM THE REAR NEVER CHANGES,UNLESS YOUR IN THE FRONT!

  Ignore this member   
blackbullet76


Pro
Posts: 1134
posted January 28, 2007 09:22 AM        Edited By: blackbullet76 on 28 Jan 2007 09:23
Once you have your tank loose and access plates off, it won't take no more than ten minutes. Just be careful and don't drop the screws. Use a good magnetic #2 phillips screwdriver. I bought a brand new one just for removing the flys. Some people say they had a hard time getting them loose, but I had no trouble with mine. Once you have the screwdriver in place, give it a small tap it with hammer. Should help break loose the locktight. The pipes I have are just D&D slip-ons. I just wanted something for sound because I can't stand a quiet bike and the D&D was the cheapest. Oh yeah, when you ride it for the first time with them out, be careful! It will have alot more on the lowend. I had a big grin after my first ride
  Ignore this member    Click here to visit blackbullet76's homepage. 
kawabusakid


Expert Class
Fast as my $$ will take me
Posts: 292
posted January 28, 2007 02:56 PM        
They dont make the stacks ,...yet,not available,still in making...schnitz has listing for them and no price,that is why
  Ignore this member    Click here to visit KAWABUSAKID's homepage. 
stevewfl


Moderator
Posts: 27920
posted January 28, 2007 05:29 PM        
I must be the last person alive with my secondaries still in.
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike

  Ignore this member   
INTIMIDA2OR


Needs a life
RED rider!
Posts: 13081
posted January 28, 2007 06:21 PM        
quote:
I must be the last person alive with my secondaries still in.


Actually there's one old guy i know who's 14 will always have the flies in as long as he owns the bike.
Only one i know of personally
____________
'06 Passion Red ZX-14



*Lee*

  Ignore this member   
stevewfl


Moderator
Posts: 27920
posted January 28, 2007 06:24 PM        
quote:
quote:
I must be the last person alive with my secondaries still in.


Actually there's one old guy i know who's 14 will always have the flies in as long as he owns the bike.
Only one i know of personally


lmao- thanks for sharing that info!
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike

  Ignore this member   
bigdtd


Needs a job
Interceptors
Posts: 4209
posted January 28, 2007 06:25 PM        
still got mine in oh yea
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT

  Ignore this member   
bigdtd


Needs a job
Interceptors
Posts: 4209
posted January 28, 2007 06:27 PM        
no dif at 150+
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT

  Ignore this member   
stevewfl


Moderator
Posts: 27920
posted January 28, 2007 06:29 PM        
quote:
no dif at 150+


dude I know I've seen your bike around by now, I just hate to go up to another another 14 owner and say "do I know you from the Internet" lmao

I think Tony and I (Black ZX14 and my Red one) passed by you and some friends in St Pete between Ulmerton and the Gandy......


____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike

  Ignore this member   
bigdtd


Needs a job
Interceptors
Posts: 4209
posted January 28, 2007 06:32 PM        
just go to the lube or oz on wed i'll buy the first beer
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT

  Ignore this member   
stevewfl


Moderator
Posts: 27920
posted January 28, 2007 07:06 PM        
quote:
just go to the lube or oz on wed i'll buy the first beer


aight!
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike

  Ignore this member   
mano 2


Expert Class
Posts: 360
posted January 28, 2007 07:59 PM        
Yes
  Ignore this member   
zxlnt


Needs a job
Kawpuke Extraordinare
Posts: 2853
posted January 28, 2007 09:35 PM        
quote:
quote:
I must be the last person alive with my secondaries still in.


Actually there's one old guy i know who's 14 will always have the flies in as long as he owns the bike.
Only one i know of personally



Naw mine are still in at the moment, I'll pull them out sometime before riding season starts again..

  Ignore this member   
Smiffy


Parking Attendant
Posts: 26
posted January 28, 2007 11:58 PM        
quote:
I must be the last person alive with my secondaries still in.


I still have mine in at the moment, but am planning to pull them this weekend.
Doubt if I will be able to get out and give it a test though, as the weather forecast is shite

  Ignore this member   
icetee


Expert Class
Posts: 132
posted January 29, 2007 09:00 AM        
smiffy! let me know how the bike turns out with the flies out.....icetee
____________
THE VIEW FROM THE REAR NEVER CHANGES,UNLESS YOUR IN THE FRONT!

  Ignore this member   
riaansh


Expert Class
Posts: 195
posted January 29, 2007 12:14 PM        
I pulled the secondary throttle plates today and installed the pc with Brock's map. Total different bike, I promise. Day and night difference. I hope I made it clear. Do it it's still smooth.
  Ignore this member   
old guy


Expert Class
Posts: 470
posted January 29, 2007 04:06 PM        
quote:
quote:
I must be the last person alive with my secondaries still in.


Actually there's one old guy i know who's 14 will always have the flies in as long as he owns the bike.
Only one i know of personally


Taint Me ! Actually will pull mine in acouple months when theres more traction here in Wa. !!!

____________
Living the good life...,
On a XZ !!!!!
Tsukigi stainless full system
pcIII w/custom map
NO freakin flies!!
GP suspension forks
Penske rear shock
Rich's custom seat
And a whole bunch of other stuff.

97 zx6r full race bike with all the
good stuff

  Ignore this member   
nightmare


Pro
ACP Racing
Posts: 1797
posted January 29, 2007 04:26 PM        
Just a tip, we removed the fies out of 2 14s. the first one, the bike had been sitting for about 2 days. The screw were hell to come out! On mine, we rode for about 15 minutes to wam it up. the screws came out with no problem! Guess the heat from the brief ride helped. Just a suggestion. Heat her up!
____________
2006 ZX14 Ninja "SWINE FLU"
60ft 1.23
8th Mile 5.16
ACP Racing

  Ignore this member    Click here to visit nightmare's homepage. 
mano 2


Expert Class
Posts: 360
posted January 29, 2007 07:27 PM        
a good screwdriver was the key for me....5 minutes cold
  Ignore this member   
phytrax


Zone Head
Posts: 526
posted February 16, 2007 08:41 AM        
Tapping the screwdriver into the head of the screw just a bit with a hammer helped tremendously for me. Amazing difference, no regrets at all, acceleration is still VERY smooth and predictable with flies out. Flies are just training wheels for noobies that don't know what a 190hp bike can do.
____________
Concourse14- Corbin Seat, Candy Apple Red Paint, Area P Slip-On
RIP+ZX-14- Brock's Gen3, Heli Risers, Corbin Bags, Corbin Seat and Oval Backrest (Burgandy Snakeskin and black alligator), Muzzys Frame Sliders, flies out, 18t front sprocket, PC3, Puig Double Bubble, Pirelli Diablo Strada's
KX450F - kickstand
>>> MySpace --CLICK-- <<<

  Ignore this member    Click here to visit Phytrax's homepage. 
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: flies out for street use or install stacks? NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.37254309654236 seconds processing time