HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: Bigg CC Turbo kit Development NEW TOPIC NEW POLL POST REPLY
halvefast


Zone Head
Posts: 806
posted October 22, 2006 03:46 AM        
Bigg CC Turbo kit Development

Just caught this over on Psychobike:
http://stage.bigccracing.com/content/item.asp?item=57
____________
Texas Mile 200.256mph - Oct. 2007 (Update 202.577mph Oct 2008) NOS assisted
ECTA Ohio Mile 195.132mph
TexasMile 2012 199.9 mph all motor!
Streetriders Shootout 2008 series Pro/ET Champ!
Streetriders Shootout 2007 Series Pro/ET Runner-up!

  Ignore this member    Click here to visit Halvefast's homepage. 
BobC


Pro
Posts: 1736
posted October 22, 2006 04:54 AM        
Sean at Big CC has a good name over here and has done a lot of work for members of 200.org, the 200 mile-an-hour club. I'm sure this will be an awesome piece of kit.
  Ignore this member   
Robmuzzy


Expert Class
Posts: 295
posted October 22, 2006 07:32 AM        
Looked at web sight. They have done a very nice job. MUZZYS has developed a 650hp kit also. It was built for our Pro Street bike which is almost finished. The MUZZY kit is built to order and cost approx. $10,000.00. The stage 1 kit is in development now and will be approx. $4,000.00.
  Ignore this member   
iflyphi


Zone Head
Posts: 542
posted October 22, 2006 08:12 AM        
quote:
Looked at web sight. They have done a very nice job. MUZZYS has developed a 650hp kit also. It was built for our Pro Street bike which is almost finished. The MUZZY kit is built to order and cost approx. $10,000.00. The stage 1 kit is in development now and will be approx. $4,000.00.


Sign me up for the first $4000 kit. I should be moved to California by the first of the year. Oh, and that $1000 challenge, you can dyno my bike when it gets there. I have the Brock Sidewinder. Probably not a fair challenge, but since I won't need it after the turbo, run the schitt out of it to see what it really does.

On a side not, exhaust related, and not meant to hijack, I went from a muzzy to a Brock sidewinder. MPH, and ET are the same as before.

  Ignore this member   
dubious


Needs a life
Needs more time to ride!
Posts: 8442
posted October 22, 2006 09:20 AM        
How much HP for each kit to public ROB?
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.

  Ignore this member   
dubious


Needs a life
Needs more time to ride!
Posts: 8442
posted October 22, 2006 09:26 AM        Edited By: dubious on 22 Oct 2006 10:35
quote:
Just caught this over on Psychobike:
http://stage.bigccracing.com/content/item.asp?item=57


HOLY FUCK!
thats a sick lookin kit!
Obviously the crank, rods and pistons are changed, but they must be beefing everything.
They must be running heavier head studs, beefed tranny, clutch etc!
Thats a beautiful kit!

Hope I have enough spare $$ come spring!

Come on Rob.

I got a wad burnin in my pocket.
Show us your cards!
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.

  Ignore this member   
iflyphi


Zone Head
Posts: 542
posted October 22, 2006 09:56 AM        
There's another post around here somehwhere. Rob has two kits, one is $4000, and the other is total race at about $10,000. Gonna try and find out what I would get for $10,000.
  Ignore this member   
dubious


Needs a life
Needs more time to ride!
Posts: 8442
posted October 22, 2006 12:31 PM        
$10K around 650 HP. as Rob posted above.
I hope the $4k kit makes around 300HP.

  Ignore this member   
iflyphi


Zone Head
Posts: 542
posted October 22, 2006 02:36 PM        
Screw that....I want the 650hp!!!! Would love to be able to miss a shift, and still run 8.0's....
  Ignore this member   
dubious


Needs a life
Needs more time to ride!
Posts: 8442
posted October 22, 2006 10:09 PM        
Well, better have another $5K to spend on tranny parts, crank , rods, billet lockup clutch etc.
Race fuel only, no not avaiation :P, race fuel
Water injection etc.

  Ignore this member   
kawabusakid


Expert Class
Fast as my $$ will take me
Posts: 292
posted October 23, 2006 02:15 PM        
I can hear parts ,SCaTtErInG from here....LOL!!! i guess you can always make your bike 24"over,and strap on them depend undergarmets...lol!!!
  Ignore this member    Click here to visit KAWABUSAKID's homepage. 
BobC


Pro
Posts: 1736
posted October 24, 2006 06:08 AM        
As a point of interest, the grey 14 shown on the Big CC web site is the bike that belonged to Rob from Colchester Kawasaki. It's the bike that ran 207mph dead at Woodbridge in September with TiForce, PC etc.
____________
Candy Thunder Blue 2006 ZZR1400
Stock wheelbase
Max: 205.4 mph in 1.25 miles

2012 ZZR1400 in Golden Blazed Green
Brock CT Full System. etc
Max: 203.1 in 1 mile (so far)

  Ignore this member   
dubious


Needs a life
Needs more time to ride!
Posts: 8442
posted October 24, 2006 07:09 AM        
Cool,
LOL ...next summer he plans to run 257 mph does he?

  Ignore this member   
GUNNER


Needs a life
Posts: 5778
posted October 24, 2006 09:36 AM        
Faster than that I would hope.. Yancy's Busa run like 260 at Maxton last year... I hope the 14 smashes that mark!
  Ignore this member   
ZXLNT


Needs a job
Kawpuke Extraordinare
Posts: 2853
posted October 24, 2006 07:54 PM        
Thats gonna be a tuff mark to beat. The Busa has better aeros and that helps immensely at record speeds...
  Ignore this member   
Big CC Racing


Novice Class
Posts: 33
posted December 09, 2006 02:38 PM        
The better info so far on this kit is here..

http://www.bigccracing.com/content/item.asp?item=57


We are actually doing 3 systems for the Zx-14. A Modular stret kit upgradable from 270bhp in its stage 1 to 500bhp fully blown with adjustable boost & the fuel to go with it. The Stage 1 race kit which will be good for 600bhp & the stage 2 race kit as in the link above.

Dont wanna sound like an advertising billboard but for info sake we are also in the middle of producing billet wide ratio gearboxes, oil cooler conversion kits & low profile billet swing pick up sump pans.

I will keep you guys updated as we go along, we built Andy heads Turbo ZX12R that went 240mph so we are optomistic that this bike will go well over 260 with the ingrediants involved (subject to the weather)

Regarding Aerodynamics it matters but only in relation to the power you have to add to push it on faster.

In other words at 600bhp it dont really matter. Just keeping it together is what counts.

  Ignore this member    Click here to visit Big CC Racing's homepage. 
dubious


Needs a life
Needs more time to ride!
Posts: 8442
posted December 10, 2006 08:32 AM        
Nice!
  Ignore this member   
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: Bigg CC Turbo kit Development NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.21915292739868 seconds processing time