kawasaki_rick
Zone Head
Posts: 512
|
posted October 11, 2006 07:09 PM
Aftermarket exhaust hanger
I was wondering who makes an aftermarket exhaust hanger for the 14? I hate my stock 1, already took left 1 off , now need 1 for the right. Stock 1 doesnt look good with aftermarket exhaust. thanks
  
|
BobC
Pro
Posts: 1736
|
posted October 12, 2006 12:30 AM
 Edited By: BobC on 12 Oct 2006 03:03
I was thinking along the same lines, haven't seen a hanger yet.
One thought I had though was about leaving the rear wheel totally exposed on the left hand side. Could be a hazard in an accident, as could the lower run of the chain with the standard exhaust removed. So I was considering fitting a hugger which looks neat too and a lower guard on the swing-arm where the chain feeds into the sprocket, like on race bikes.
http://www.skidmarx.co.uk/kawasaki_huggers.htm in the UK have a hugger for the 14.
____________
Candy Thunder Blue 2006 ZZR1400
Stock wheelbase
Max: 205.4 mph in 1.25 miles
2012 ZZR1400 in Golden Blazed Green
Brock CT Full System. etc
Max: 203.1 in 1 mile (so far)
|
makenna
Expert Class
Posts: 355
|
posted November 28, 2009 03:11 AM
Old thread I know...
Anybody have any luck finding a nice looking aftermarket exhaust hanger? Sato makes a decent set, price and only one side though.
____________
English is the only language that matters.
|
14nooby
Zone Head
Posts: 987
|
posted November 28, 2009 05:06 AM
The one Schnitz sells is sweet but expensive
|
makenna
Expert Class
Posts: 355
|
posted November 28, 2009 05:32 AM
It is very nice, but the problem with that one is just that, it's only one. Need one for each side as I have dual Yosh's.
____________
English is the only language that matters.
|
starchild
Expert Class
Posts: 366
|
posted November 28, 2009 08:01 AM
hey how's it going, just was on the lookout for the same thing, too much money for the aftermarket hangers. i simply went to home depot bought a length of aluminum and took measurements, cut lenghts and drilled holes and made my bracket. no bling bling but it works just as good for 10.00 bucks there is no better deal.
____________
jay
|
Nbrion
Parking Attendant
Posts: 29
|
posted November 28, 2009 08:47 PM
quote:
hey how's it going, just was on the lookout for the same thing, too much money for the aftermarket hangers. i simply went to home depot bought a length of aluminum and took measurements, cut lenghts and drilled holes and made my bracket. no bling bling but it works just as good for 10.00 bucks there is no better deal.
Sounds cool, post some pics! 
|
INTIMIDA2OR
Needs a life
RED rider!
Posts: 13081
|
posted November 28, 2009 10:05 PM
____________
'06 Passion Red ZX-14
*Lee*
|
Flame On
Needs a life
Fuel Air & Spark
Posts: 17104
|
posted November 28, 2009 10:42 PM
I bought one from ebay
____________
77 RD 400
80 GS1000 GT
06 ZX14
|
Flame On
Needs a life
Fuel Air & Spark
Posts: 17104
|
posted November 28, 2009 10:46 PM
____________
77 RD 400
80 GS1000 GT
06 ZX14
|
makenna
Expert Class
Posts: 355
|
posted November 29, 2009 12:52 AM
Anybody know if the 10R aftermarket braket will fit the 14R?
Flame, you don't happen to rememmber from which seller on E-Bay you bought that from?
____________
English is the only language that matters.
|
Flame On
Needs a life
Fuel Air & Spark
Posts: 17104
|
posted November 29, 2009 12:57 AM
No I dont looked dont see him posting them on ebay any more
____________
77 RD 400
80 GS1000 GT
06 ZX14
|
makenna
Expert Class
Posts: 355
|
posted November 29, 2009 01:02 AM
Anybody know if the 10R aftermarket braket will fit the 14R?
Flame, you don't happen to rememmber from which seller on E-Bay you bought that from?
____________
English is the only language that matters.
|
starchild
Expert Class
Posts: 366
|
posted November 29, 2009 11:29 AM
hope this makes it worthwhile lol simplicity and no bling
____________
jay
|
starchild
Expert Class
Posts: 366
|
posted November 29, 2009 11:33 AM
i suck at posting pics
____________
jay
|
makenna
Expert Class
Posts: 355
|
posted November 30, 2009 06:48 AM
Well, I found a spot that manufactures them, Clean and simple. I ordered my rear hugger from this company and they make a good quality product and their customer service is great too.
http://projektd.com/index.php?cPath=26_30_37
____________
English is the only language that matters.
|
|
|
HOME
NEW TOPIC
