stevewfl
Moderator
Posts: 27920
|
posted October 02, 2006 08:49 PM
quote:
I agree,
trolling and flaming doesn't belong with assistance, and repair threads....
No one would appreciate it ,If it was anyone of us and our thread was hijacked.
Trolls and gheys look like this:
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
  
|
fastestbusaaround
Needs a life
I eat Fish...
Posts: 7889
|
posted October 02, 2006 11:55 PM
Duhhhh...what's a "ghey"?:P
Question -- besides the light, are there any other issues...power loss or anything like that?
____________
FYYFF!!!
|
serius blk
Zone Head
Posts: 543
|
posted October 03, 2006 04:34 AM
I had the same error code on my bike. I found one of the wires that connects the speedohealer to the harness. Once i put the wire back. Put the bike in gear on the stand and let the back wheel spin. The computer resets its self once the problem has been solved. So what ever you do if it doesnt reset theres still a problem. I tried everything like unhooking the ground. Nothing worked. Once fixed, it will reset.
|
swft
Needs a life
Full throttle!
Posts: One MEEEEEELLION
|
posted October 03, 2006 06:17 AM
quote:
Ok, guys this is a custom show bike with probably 15-20K worth of work.
And you can't afford a fewkin service manual??
|
speedgene
Zone Head
Posts: 996
|
posted October 03, 2006 07:35 AM
If you just put the bike together, then most likely the wiring may have (pulled out) disconnected at the unit itself?.... Maybe a pinched harness?
Follow the wires out of the sprocket cover. Look for the connections to be snapped together, or when you did snap the connectors back together, a pin connector may have backed out? Look at the plastic connectors from behind? Lightly pull out each wire from the back of the plastic? You are looking for that one wire that's not connected to the system?
Pull the sprocket cover off. Follow the wire harness sheathing, and find a crushed area where the cover going back on, may have pinched a wire? You'll see that evidence by viewing the wire harness from end to end.
Main wire colors to look for are: the black/yellow wire, and black/blue wire from the 3 pin connector.
____________
E-tard
|
NINJA12
Needs a job
Posts: 3310
|
posted October 03, 2006 03:57 PM
Swft , Are you trying to be a ass or is this normal for you?
A friend asked for help with his bike not his wallet, OK?
It's fixed!
He checked all the connection and when he tested it, all's well.
Thanks guys.
|
ninja14
Pro
Posts: 1136
|
posted October 03, 2006 04:20 PM
quote:
...... Put the bike in gear on the stand and let the back wheel spin. .....
Really.............mine will shut off. Did you disable the stand switch?
I ordered the manual for the 14 some time ago....backordered...may never get it.........should get my $80 back..... I go to the shop and Xerox pages when I need something :-)
|
swft
Needs a life
Full throttle!
Posts: One MEEEEEELLION
|
posted October 03, 2006 05:37 PM
Think he means on a spool lift type of stand...
*grin*
|
|
|
HOME
NEW TOPIC