kawpower
Zone Head
Mr kawasaki 2 you!
Posts: 887
|
posted August 01, 2006 05:09 AM
AREA P exhaust
Does anyone have an area p, full or slipon exhaust on there 14 and if so how do you like it? fit and finish, sound and ease of repacking.
   
|
navigator
Expert Class
Posts: 308
|
posted August 01, 2006 05:49 AM
PM Jack69, he is running a set of the stainless slipons on his. Seems happy enough.
|
kawpower
Zone Head
Mr kawasaki 2 you!
Posts: 887
|
posted August 01, 2006 09:41 AM
Talked to kbryant and i gotta say he is a real down to earth person with honest answers, i wouldnt hesitate to buy from him again.Cant wait to get my exhaust.
|
da blk 1
Novice Class
Posts: 58
|
posted August 01, 2006 10:18 AM
 I have an AreaP slip-on system on my 14. 1st they're stainless steel oval slip-on... 2nd the finish is polished and mirror or chrome in appearance.... 3rd the sound is the deepest sound I have heard....I have dual two brothers slip-ons on my CBR1100xx and the AreaP sound is heard over the two brothers.... and where ever I go everyone ask about the exhaust and says how good it sounds.....4th I have had them next to other exhaust systems and as far as deep sounding tone//////// none sound like the AreaP....5th real good construction it's assemble with screws for easy packing and the mid pipes are held together with band clamps... Its a great system and I am very happy with it !!!!!! ......HOPE THIS HELPS YOU.........PEACE/OUT DUDE
|
QWICKR
Novice Class
Posts: 98
|
posted August 02, 2006 09:38 PM
Wife has the polished 15" slip-ons and loves them. They look and sound great. Super folks at Area-P.
____________
YES... Her ZX-14 !!!
|
D
Needs a job
Posts: 3365
|
posted August 02, 2006 11:00 PM
Someone needs ta post pics.
|
Jack69
Novice Class
Posts: 50
|
posted August 07, 2006 05:06 AM
Yeah, I have them and they are very nice.
I was instantly wowed by the build quality and the look. They were just a little loud and almost "tinny" sounding until the packing wore in a little. This is pretty common. But the really cool thing is that the day they showed up Area P had uploaded their slip-on map to Dynojet.com (powercommander.com) So I was able to stick the map in right away.
They sound great, deep but not overly loud. I've had a lot of compliments at signal lights from cage drivers. One even asked me if they were the stock pipes.
Here are some pics.
____________
'03 Mille Silver - ZX-14 Blue
|
fullzx12r
Zone Head
French Guy
Posts: 864
|
posted August 07, 2006 09:02 AM
great LOOK !!!!!
noise ??? an exemple ?
____________
zx-12r 01'
zzr 1400 06'
hayabusa 08'
zzr 1400 12'
|
fish_antlers
Administrator
The Truth is Out There
Posts: 21894
|
posted August 07, 2006 09:03 AM
try visiting the AreaP website.... use your computer.
____________
What business is it of yours where I'm from, Friendo?
|
frEEk
Administrator
ummm... yeah
Posts: 9660
|
posted August 07, 2006 09:12 AM
quote:
I've had a lot of compliments at signal lights from cage drivers. One even asked me if they were the stock pipes.
gotta love that unique option from Area P of leaving the branding off. don't know of anyone else who offers that.
|
zerMATT
Pro
Posts: 1931
|
posted August 07, 2006 10:01 AM
Are those the factory mid-pipes? If not, it's pretty cool that AreaP left room for the centerstand on the left-side.
____________
'06 Passion Red ZX-14 | Black D&D Slip-ons | Speedo Healer | V1 | zumo 550 | Heli-Risers | PhantomX
|
warbird
Needs a job
Posts: 2739
|
posted August 07, 2006 12:24 PM
Those are very nice.............good job Area P............. 
____________
I'd Rather Be Roadracing.
|
TeamSpeed
Expert Class
Posts: 449
|
posted August 07, 2006 01:49 PM
quote:
Are those the factory mid-pipes? If not, it's pretty cool that AreaP left room for the centerstand on the left-side.
Their site shows mid-pipes and mufflers.
|
B True
Novice Class
Posts: 69
|
posted August 07, 2006 04:35 PM
Jack69,
how does the Area P sound once you get down on it? do they still have the deep sound?
____________
To be true to others; one must first be true to himself
Muzzy Carbon fiber exhaust, PC III, SpeedHealer,
16-42 gearing, BST Wheels, CF fairing, Corbin
Seat, Puig windshield, Dyno LCD purchased but
not on yet
|
big easy
Novice Class
Posts: 35
|
posted August 07, 2006 05:53 PM
I have a set coming but rode with da blk one and trust me, they have a really deep sound when on the throttle. So much so, that I ordered a set. Guess you can say that I was impressed. Not with just the sound but the quality of the mid and canister. I heard the others, but to me, the Area P's have the sound that I expect when I push the start button on a 1400cc bike. The sound is deep at idle but not overly loud, but a good bit louder than stock, of course. Just nice and deep. But you should hear them at about 3200 rpm! They really get deep and sound like a Mustang with a great set of Flowmasters and tuned just right!
I talked to Kerry and he was great on the input side too. Explains his pipe and quality very well and was very patient and descriptive answering the questions. He cemented the deal with me for sure. He told me on Wednesday that they were building 14 pipes on Thursday and I was right on time. He said that it would ship and Friday and sure enough, I got the e-mail on Friday night stating that they shipped. Now, I am waiting on Fed Ex and will get to hear the thunder myself!
|
lucky14
Pro
Posts: 1439
|
posted August 07, 2006 07:42 PM
STOP IT!!! STOP IT NOW!!!
I really want an exhaust and had my mind made up on either the Brock or the Two Brothers, or the Yosh or the D&D or the Muzzy or the..................................well, I guess you get the picture. 
The AREA P is starting to "sound" like what I am looking for.
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
Jack69
Novice Class
Posts: 50
|
posted August 10, 2006 12:36 PM
quote:
Jack69,
how does the Area P sound once you get down on it? do they still have the deep sound?
They sound really tight. A buddy of mine was about 200' behind me when I pulled out to pass a slow mover and he said it sounded like an IRL car gettin' Jiggy with it.
I had a full Muzzy system on a ZX-12C (ZZR1200) and it sounded a little lighter at idle and a little louder at WOT. The Area P's are mellower but deeper all of the time. I don't know how to describe it but at WOT they just sound mean.
I also like that they shipped the set without the logo stickers on them. Gives it that stock look without the length of the stock pipes.
Yes, the mid pipes come with the set and they are nicely polished SS.
____________
'03 Mille Silver - ZX-14 Blue
|
kawpower
Zone Head
Mr kawasaki 2 you!
Posts: 887
|
posted August 11, 2006 04:53 AM
Got my AP slipons today , it was love at first site when i opened the box ,carbonfiber 18" cans with 2.50 outlets , i dont think i have ever seen such topnotch quality ,workmanship and materials for the price, OR WELL ABOVE the price for that matter and the sweet,deep music they play is beautiful, seat of the pants dyno says the beast has awaked, thanks K BRYANT U THE MAN.
|
TeamSpeed
Expert Class
Posts: 449
|
posted August 11, 2006 06:04 AM
Need pics of the CF shorter pipes please!!! Their site has a really bad shot of the CF prototype.
|
14black
Expert Class
Posts: 280
|
posted August 11, 2006 06:10 AM
kawpower - can you post a bunch of pics? I am looking at the 18" cf cans, as well...thanks...
|
kawpower
Zone Head
Mr kawasaki 2 you!
Posts: 887
|
posted August 11, 2006 06:33 AM
as soon as i can get my son to do the digital camera thing. they realy look good on my black 14, im not into the bling , will have the wheels powdered black this winter.
|
14black
Expert Class
Posts: 280
|
posted August 11, 2006 07:41 AM
quote:
as soon as i can get my son to do the digital camera thing. they realy look good on my black 14, im not into the bling , will have the wheels powdered black this winter.
Cool - looking forward to the pics...
|
D
Needs a job
Posts: 3365
|
posted August 11, 2006 08:42 AM
quote:
Need pics of the CF shorter pipes please!!! Their site has a really bad shot of the CF prototype.
No need to worry bout their CF - they use some of the best stuff I've seen. My extreme core s/o on the 10 looks unphased after a year and 10k miles of use.
|
zrx4me
Novice Class
Posts: 42
|
posted August 17, 2006 06:55 AM
hey kawpower ,where's the pics???
|
14black
Expert Class
Posts: 280
|
posted August 17, 2006 07:28 AM
I'll post pics, as I already went ahead and ordered them after speaking with Kerry Bryant on the phone. They were shipped yesterday and I'll post pics most likely same day they arrive. I got the 18" carbon slips with the 2.25" cores for my black 14...here is the email from Kerry yesterday:
Hi Paul,
Your ZX14 Carbon Fiber Slip-Ons with 2.25" cores are now ready. We will ship by FED-X today. They will send you an tracking number directly.
Thank you again for the order.
Sincerely,
Kerry Bryant
Kerry Bryant
CEO - Area P
Silent Sport N.A.
1240 Simon Circle, G/H
Anaheim, CA 92806
Ph - 714-630-2386
Fx - 714-630-2422
areapnolimits.com
|
|
|
HOME
NEW TOPIC