DR Yosh
Parking Attendant
Posts: 18
|
posted July 18, 2006 10:04 AM
 Edited By: DR Yosh on 18 Jul 2006 13:39
YOSHIMURA RELEASE PIPE,EMS
We have got a Yoshimura EMS for a ZX14R,you can have three maps already programmed on the unit.The maps are controlled by a billet toggle switch mounted to the handlebars it replaces the brake lever bracket.There is also muiltable shift light unit that can also be programmed to certain rpm.Our ems is made here in the usa not china unlike power commander and so far they are perfect ..no failures
We have also our full system (sorry about the delay) with slipons (carbom trc to our r22 bling series)there also a full system that should be ready for the shelf by the end of the week....bar ends,crash protectors also
I am to build cams,head gasket,adjustble cam sprockets ...what I would like to know is there anything else that you would like for this bike.....
So you zx14 riders the new gsxr1400r won't be out till 2008 not 2007 and that was straght from suzuki japan...thanks for the feed back
  
|
zerMATT
Pro
Posts: 1931
|
posted July 18, 2006 10:18 AM
Edited By: zerMATT on 18 Jul 2006 11:19
When will these parts be posted on your website?
Can you post pictures of the ZX-14 frame protectors installed so we can see what they look like?
____________
'06 Passion Red ZX-14 | Black D&D Slip-ons | Speedo Healer | V1 | zumo 550 | Heli-Risers | PhantomX
|
fastestbusaaround
Needs a life
I eat Fish...
Posts: 7889
|
posted July 18, 2006 10:47 AM
TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER
TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER TROLL-SPAMMER
There is no Dr. Yosh...this is just SPAM IMO...until he proves otherwise...we all know that the new Busa or whatever it may be, won't be seen till 08 (old news)...Logic dictates that...and if this guy was a legit company rep...he wouldn't be pissing all over the PC3. This guy's a lying sack of shit and should be banned from here. No if's but's or and's about it.
____________
FYYFF!!!
|
zerMATT
Pro
Posts: 1931
|
posted July 18, 2006 11:35 AM
Good points. That also explains why there is no ZX-14 info on their website...
____________
'06 Passion Red ZX-14 | Black D&D Slip-ons | Speedo Healer | V1 | zumo 550 | Heli-Risers | PhantomX
|
Stalwart
Needs a job
Posts: 3360
|
posted July 18, 2006 12:01 PM
quote:
TROLL-SPAMMER . . . .This guy's a lying sack of shit and should be banned from here. . . .
But FBA, how can we have fun with him if he's banned? I say let him provide credentials, meanwhile continue with the abuse until he buggers of on his own volition. BTW, did you notice he spelled it "Yoshiomura" above not Yoshimura. Flame on!
____________
Stuart
________________________________
Ridin' the Trump train.
|
zerMATT
Pro
Posts: 1931
|
posted July 18, 2006 12:20 PM
Kapow!!!
____________
'06 Passion Red ZX-14 | Black D&D Slip-ons | Speedo Healer | V1 | zumo 550 | Heli-Risers | PhantomX
|
DR Yosh
Parking Attendant
Posts: 18
|
posted July 18, 2006 12:35 PM
Dear tosser's ...my email is credpath@yoshimura-rd.com.....or just ring me you lossers....also they aren't posted as only the dealers found out on monday.....
|
D
Needs a job
Posts: 3365
|
posted July 18, 2006 12:47 PM
Losers.
That would be "losers" , not "loosers".
Loosers applies mostly to the gum flapping I believe.
That is all, carry on.
|
zerMATT
Pro
Posts: 1931
|
posted July 18, 2006 12:50 PM
Edited By: zerMATT on 18 Jul 2006 13:51
What's a "tosser"?
Oh, Mr Yosh, are you a sponsor here at bikeland.org? I haven't seen any indication that there is a Yosh sponsor here... you may wanna get ready to pay "the man" for your free advertising.
____________
'06 Passion Red ZX-14 | Black D&D Slip-ons | Speedo Healer | V1 | zumo 550 | Heli-Risers | PhantomX
|
DR Yosh
Parking Attendant
Posts: 18
|
posted July 18, 2006 12:55 PM
I passed the information on as a favour to zx14r riders.....up too you what you do with the information
|
mustmoto
Expert Class
e-famous
Posts: 230
|
posted July 18, 2006 12:57 PM
Tosser is a jerk off. A term used in the UK. Not very nice if your trying to sell your wares if you ask me...
|
Stalwart
Needs a job
Posts: 3360
|
posted July 18, 2006 01:05 PM
quote:
Dear tosser's ...my email is credpath@yoshimura-rd.com.....or just ring me you lossers....also they aren't posted as only the dealers found out on monday.....
Dear Dr. Dickhead,
You expect us to believe a word you say when you can't even spell the name of the company you allegidly work for?
I'll apologise as soon as someone I trust can confirm you aren't some TROLL feeding us LABS (Lies And Bull Shit).
____________
Stuart
________________________________
Ridin' the Trump train.
|
DR Yosh
Parking Attendant
Posts: 18
|
posted July 18, 2006 01:09 PM
why don't you just email me then ....and it was a typing error
|
DR Yosh
Parking Attendant
Posts: 18
|
posted July 18, 2006 01:22 PM
there won't be a photo on the yoshimura site as so far it's not that bigger news....as I said it was a favour telling zx14 riders whats new and what they can see later from us .I didn't expect this much shit....I have left my email and emailed certain people my phone number here in chino....I just wanted to help you guys out as I have had this bike since november last year....thanks
|
flyboy
Pro
Posts: 1536
|
posted July 18, 2006 01:23 PM
Lossers??????
I still remember Pearl Harbor. I'll stick with Brock.
____________
'There's more living in five minutes flat-out on a bike than some men have in an entire life'.
"The World's Fastest Indian"
One fast red ZX-14,
Three World and four National Land Speed Records,
One faster red and white Cessna Turbo 210
|
D
Needs a job
Posts: 3365
|
posted July 18, 2006 01:24 PM
We're all perfect here - at least I know I am :P
Is this EMS hub gonna control shifter/ignition kill like previous models? Can the ignition timing be mapped as well? Will Ben beat Matt?
How bout rear sets, muffler brackets, decent priced damper, cams, wheels?
|
fastestbusaaround
Needs a life
I eat Fish...
Posts: 7889
|
posted July 18, 2006 01:24 PM
Edited By: fastestbusaaround on 18 Jul 2006 14:26
I'm just responding to his e-mail now...this is what he wrote to me:
"-----Original Message-----
From: DR Yosh (bikeland.org) [mailto:credpath@yoshimura-rd.com]
Sent: Tuesday, July 18, 2006 4:45 PM
To: steve_______XXXXX@gmail.com
Subject: tosser
maybe you should get sum balls and ring me ....chris in R&D in chino....909 6284722...
or email me credpath@yoshimura-rd.com and just for your knowledge I\'m from New Zealand and I expect more from someone from Canada....maybe you should move to the U.S you will fit in!"
_________________________________
Nice way to sell product...
____________
FYYFF!!!
|
DR Yosh
Parking Attendant
Posts: 18
|
posted July 18, 2006 01:32 PM
I have asked the guys in sales to post it on our web site but the won't as the dealers only got the info yesterday and the international guys like matt madlin imports(aussie) haven't received it also....
|
DR Yosh
Parking Attendant
Posts: 18
|
posted July 18, 2006 01:34 PM
you have already abused me you have my details...and as I said get sum balls and get hold of me....
|
DR Yosh
Parking Attendant
Posts: 18
|
posted July 18, 2006 01:41 PM
there was two ems one produced by dynojet for us in 2000-2002 that used to kill the ignition....this quickshifter is a sep unit that is plug and play...fits between the two shift rods and you can adjust all the gears on sep adjusters.Rear sets would be cool but I see we don't make much of them now and there is alot of other people making some trick rear sets maybe try steve harris....cams and as a option cam sprockets shouldn't be too far away...muffler brackets are with the pipes...wheels....oz wheels are pretty cool and it is what we are using on our project bike we are building....
|
D
Needs a job
Posts: 3365
|
posted July 18, 2006 02:01 PM
OZ?
What happenned to Galespeeds?
And the project bike is???
|
TONYHUFFMAN
Expert Class
Posts: 152
|
posted July 18, 2006 02:07 PM
Dr yosh dont pay attention to stalewart and fastestcocksucker, these pussies cant even ride a stock zx-14. They have no idea about high performance bikes. they spend most of thier time on the forum correcting peoples english. Thanks for the update. Please ignore the hardcore fagots on here.
|
DR Yosh
Parking Attendant
Posts: 18
|
posted July 18, 2006 02:22 PM
oz wheels are made in australia they do most of WRC and F1 and were doing motogp...and have a similar look as the standard rims....by chance would zx14r owners buy rearsets and comestic stuff...or hardcore performance parts like cams,piston kit ...I am trying to design a new piston kit for our project bike ...my idea was to get 200bhp at the wheel from just owners buying cams,head gasket ,pc3or ems(ignition mapped),air box mod (we have already done) and maybe pistons as a last resort....
as I said if anyone wants something made give a me a bell so I can research it and then produce it .....also heavy duty billet engine covers are people still buying these or are the crash protectors good instead
|
stevewfl
Moderator
Posts: 27920
|
posted July 18, 2006 02:59 PM
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
Vegasdude
Zone Head
Posts: 821
|
posted July 18, 2006 03:01 PM
|
|
|
HOME
NEW TOPIC