navigator
Expert Class
Posts: 308
|
posted June 16, 2006 09:23 AM
I just spoke with a tuner on the North side of Houston who says he has removed secondary flys for a couple of ZX-14 owners and is doing another one this afternoon. He also said he has a couple maps ready to install. He has high praise for this mod.
So who in Houston has had this done? Speak up.
____________
Depression is merely anger without enthusiasm.
  
|
mugsymd
Expert Class
Posts: 169
|
posted June 18, 2006 02:50 AM
Where are you all going that fast - heck in Virginia you'll get thrown in the slammer for going that fast - I have to keep my speed down - heck I get in trouble for going that fast flying in this area!
____________
1987 Red/White Ninja 750
1988 K1
1991 FatBoy
2004 VROD
2005 K1200S
2006 ZX-14 - Red
|
zxbob
Pro
Posts: 1692
|
posted June 18, 2006 04:45 AM
quote:
Ditto zxbob.
You didn't change the map... or didn't have to?
I just did some playing with the map. I increased the fuel in the 20% to 40%
throttle range - 2750 rpm to 5000 rpm.
I then did a map compair. For those of you running a Schnitz map you can
see that this will take out some of the dips in Ryans map.
My bike hits like a hammer ........ still no dyno results yet, but forthcoming.
But again, this bike is flying. I still highly reccomend this mod for seasoned
riders !
Bob
|
teetime86
Parking Attendant
Speed, and Women, Never Enough
Posts: 2
|
posted April 15, 2009 07:19 PM
!!!! I STRIPPED A SCREW ON ONE OF THE FLIES!!!! HOW DO I GET IT OUT!!!!
|
Obba
Expert Class
Posts: 455
|
posted April 15, 2009 09:22 PM
LOL!
I thought WTF when i saw this post pop up again. and it's poor old Teetime86 with 2 posts.... :0
TeeTime, [if] the search is working you will find LOTS of info over stripped screws in the flies. Don't panic!
I'm sure someone will reply and give you the answer. I can't as i don't own one. I'm saving up to by Shanes 
|
kawpower
Zone Head
Mr kawasaki 2 you!
Posts: 887
|
posted April 16, 2009 04:58 AM
ALWAYS HEAT THE SCREWS UP WITH A SOILDERING PENCIL BEFORE TRYING TO REMOVE THEM , it loosens the loctite on them and removal is easy.
____________
Cecil County 2010 Motorcycle ET Champ. 9 Wins- 4 RUs .06zx14 turboed for 2012 .
|
kawpower
Zone Head
Mr kawasaki 2 you!
Posts: 887
|
posted April 16, 2009 05:03 AM
number 2 philips and use a good quality one.
____________
Cecil County 2010 Motorcycle ET Champ. 9 Wins- 4 RUs .06zx14 turboed for 2012 .
|
kawasakijockey
Pro
Posts: 1876
|
posted April 16, 2009 05:32 AM
Talk about a gravedig post...
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 17, 2010 03:45 PM
quote:
It's sort of a waste because you still have the Mikuni gear box, and the "SUBTHROTTLE'S" TPS still attached to the sub's bar. The subthrottle's electronics still commands the "MAIN" via ECU/sensors/temp/etc.... Who said Redundant?
Play with the air screws... what do you have to lose?
LOL
wee
|
LAB3
Needs a job
Posts: 2977
|
posted April 18, 2010 04:33 PM
quote:
number 2 philips and use a good quality one.
Or purchase a J.I.S. screw driver. Google J.I.S. screws. But a like new Snap on Phillips will do it, but.......... Wheelie posted this last year.
|
reggiegroober
Expert Class
Posts: 376
|
posted April 19, 2010 04:18 AM
Reading this post now feels like watching cavemen discover the wheel.
All the guys, FBA, smokin, Fish etc talking about the flies for the first time.
Now it's the first mod anyone does.
It's like opening a time capsule from 2006.
any regrets on removing the secondaries.......yeah right
____________
Ducati 1198S, Black as Satan's Heart and twice as fast....Fuck you Salsa
|
68gts2
Zone Head
hobbies ( Beating you !!! )
Posts: 927
|
posted April 19, 2010 04:34 AM
Only 1,wish I hadn't rode with them for 2000 miles.
____________
Chromed-out,in the dirt 08SE with all the good stuff!!!
|
LAB3
Needs a job
Posts: 2977
|
posted April 19, 2010 04:53 AM
quote:
Reading this post now feels like watching cavemen discover the wheel.
All the guys, FBA, smokin, Fish etc talking about the flies for the first time.
Now it's the first mod anyone does.
It's like opening a time capsule from 2006.
any regrets on removing the secondaries.......yeah right
I agree, on a 2006/2007 with a PCIII and map..... Great Mod. I was just letting the new members know Jap bikes have J.I.S. screws. Not Phillips.
|
speedgene
Zone Head
Posts: 996
|
posted April 19, 2010 06:12 AM
quote:
Reading this post now feels like watching cavemen discover the wheel.
Here is the original trick and guys were trying to move to some 5th gear deal and without those 3 basic variables banging on page 4-47 of the 1999-2000 Ha Ya Boosay how much wording do you need to comprehend the wheel?
I'm not sharp in the math dept., but the concept...Well, since 1999 or 2000, I'm not soldering a drop behind a clutch for how many years you were turning that wheel or outer clutch basket is dis basket case says other wise. Ass the wheel turns, eye van be drive inn... ____________ Fill in the blanket is poo sea and wheels is nice if you can...
Wheelllllll, WATT say ye now, bluff full low job????
Pull up the lean out thread and PC needed > You'll seize the bike [without] is another wheel turns direction. Yeah? No!
____________
E-tard
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 19, 2010 06:30 AM
Gixxer's have been pulling secondaries many years before 14's
wee
|
speedgene
Zone Head
Posts: 996
|
posted April 19, 2010 06:38 AM
 Edited By: speedgene on 19 Apr 2010 14:40
I meant the tre thing that ties in with the flies. Busa had the same flies, only in the air cleaner system.
____________
E-tard
|
|
|
HOME
NEW TOPIC