gunner
Needs a life
Posts: 5778
|
posted December 22, 2005 11:27 AM
Not for me Sir. A 500 Hp ZX10 would only be fit for Drag Racing. I've already been down that road and don't care to make a return trip. Because I've been there and done that I'll share for free to everyone How to make a Small Fortune Drag Racing!! This is a secret that you only learn after years in the sport and I'm about to share it for free.
Start with a Large fortune and it will turn into a small one right before your eyes 
  
|
rac4it
Needs a job
Bergie
Posts: 3009
|
posted December 22, 2005 11:28 AM
quote:
You got a lot to learn, but with luck maybe you'll get there. And watch that mouth. Could I intrest you in a slightly used bridge 
To be clear, exactly who are you talking to with that statement?
|
gunner
Needs a life
Posts: 5778
|
posted December 22, 2005 11:38 AM
quote:
One loser post to ruin a good thread. Maybe it should have been in the news rather than a thread.
I would think it's fairly clear isn't it. It was clear to me. I would call it a draw at this point & to be even more clear Not a single comment I made was to your ass.
|
rac4it
Needs a job
Bergie
Posts: 3009
|
posted December 22, 2005 11:43 AM
OK I think you've represented yourself well here 
|
gunner
Needs a life
Posts: 5778
|
posted December 22, 2005 11:51 AM
Fair enough Sir. The comments I made were never intended to Cause a stink with you or Rob. I respect Rob and admire the man for what he's done. I just wanted to say that I see so many people beating their chest over a dyno sheet and dyno sheets can be fake if someone had a mind to do that. I wish I had picked another thread to post that in. I wouldn't Defame Rob for anything. I can't eat this damn thread and make it go away or I would. I hate it caused hard feelings. I'm not here for that kind of shit.
For the thrird time Rob I'm sorry for the shit I caused here. NO harm was intended.
|
ninerrider01
Novice Class
Posts: 70
|
posted December 22, 2005 12:18 PM
Hey Gunner, I've taken the 'road of regret' before too... just delete your posts if you want, not many people quoted you so you can still get them outta there.
|
gunner
Needs a life
Posts: 5778
|
posted December 22, 2005 02:45 PM
Nah! I'll take the heat. It takes more of a man to stand up for his actions. I think I've made it clear what my intent was. I'm fair game for any and all. Climb on boys
|
turbo1320
Novice Class
Posts: 51
|
posted December 22, 2005 04:56 PM
 Edited By: turbo1320 on 22 Dec 2005 17:20
Gunner your a POSER
POSER!!!
|
fish_antlers
Administrator
The Truth is Out There
Posts: 21894
|
posted December 22, 2005 05:26 PM
quote:
POSER!!!
thank you.
You're making it hard on us saying "what you did" before.
____________
What business is it of yours where I'm from, Friendo?
|
osti33
Needs a job
Posts: 2973
|
posted December 22, 2005 05:30 PM
quote:
quote:
POSER!!!
thank you.
You're making it hard on us saying "what you did" before.
You saw that too huh?? 
|
D
Needs a job
Posts: 3365
|
posted December 22, 2005 05:34 PM
I would be interested to know about how much power the stage 1 kit is good for (I know it's variable)?
I'd also like to know what kind of install time would be involved for someone that is a fairly good wrench.
Also like to know what Muzzy recommends off of the accesory list for best street use.
Will Muzzy do the install and for how much $?
Available when?
|
gunner
Needs a life
Posts: 5778
|
posted December 22, 2005 06:47 PM
Edited By: gunner on 22 Dec 2005 19:22
quote:
quote:
POSER!!!
thank you.
You're making it hard on us saying "what you did" before.
Shit that just the stuff I can remember But you're right that's yesterday. Let's talk about today. As for the POSER smack talk. Keep that shit up and I'll cut your Child Support off
|
turbo1320
Novice Class
Posts: 51
|
posted December 22, 2005 07:00 PM
quote:
I would be interested to know about how much power the stage 1 kit is good for (I know it's variable)?
I'd also like to know what kind of install time would be involved for someone that is a fairly good wrench.
Also like to know what Muzzy recommends off of the accesory list for best street use.
Will Muzzy do the install and for how much $?
Available when?
Call Dave at Muzzys 541-389-9938 EXT 106 he will try and help you out.
|
zxhoya
Zone Head
Posts: 631
|
posted December 22, 2005 08:14 PM
quote:
I would be interested to know about how much power the stage 1 kit is good for (I know it's variable)?
I'd also like to know what kind of install time would be involved for someone that is a fairly good wrench.
Also like to know what Muzzy recommends off of the accesory list for best street use.
Will Muzzy do the install and for how much $?
Available when?
Stage I: 233.61hp
109.67ft/lbs
____________
''The angle of my dangle is inversely proportional to the heat of my meat'' Will Ferrell
|
ikezixxer
Expert Class
Posts: 268
|
posted December 22, 2005 10:32 PM
I got a question...Rob muzzy isnt too much into GP is he? more drag and SS. Just wondering...But what I really want to know, being in the tuning business, etc has he ever met any of the big GP riders, rossi, particularly? I have wanted to watch him on a track in person...just fun.
|
gunner
Needs a life
Posts: 5778
|
posted December 22, 2005 11:32 PM
Edited By: gunner on 22 Dec 2005 23:44
Ever heard of some guys named Lawson, Rainey, Chandler, Russell? Mr. Muzzy could write a book on GP if he wanted to do so. BUT, you'll probably do much better directing those questions to turbo1320 his knowledge runs deep and I'm considered a poser by his standards. But on second thought he probably won't have that knowledge because his poser statement pretty well land marked his age. He was still dripping down his daddy's leg when Mr. Muzzy was doing that stuff
|
fish_antlers
Administrator
The Truth is Out There
Posts: 21894
|
posted December 23, 2005 08:46 AM
Edited By: fish_antlers on 23 Dec 2005 09:00
hey gunner... Please take you're battle with turbo to the Smackhouse. Leave this topic open to technical discussion.
Thanks
____________
What business is it of yours where I'm from, Friendo?
|
gunner
Needs a life
Posts: 5778
|
posted December 23, 2005 09:03 AM
Wouldn't that be HEY turbo take that shit, AND not hey gunner? Reread the post Sir I said nothing to him before he started his crap.
Thanks
|
fish_antlers
Administrator
The Truth is Out There
Posts: 21894
|
posted December 23, 2005 09:13 AM
All he's said is that you're a poser. You can take that debate to the Smackhouse and argue for days or months if you want. That's why that section of the site exists.
So, to make you feel better, Gunner, AND turbo, can you please take your personal arguement to the Smackhouse and leave this topic open to technical discussion.
____________
What business is it of yours where I'm from, Friendo?
|
gunner
Needs a life
Posts: 5778
|
posted December 23, 2005 09:14 AM
Fair enough Sir. Merry Christmas to you 
|
worm~hole
Needs a life
Miles to go before I sleep....
Posts: 10623
|
posted December 23, 2005 09:17 AM
...I've read and re-read this thread to gain a better understanding of what the crew MUZZY'S has accomplished...I applaud the crew at MUZZY'S, job well done, guys!...but the thing that grabbed my attention most was this: there's more back-peddling whine by gunner than a turbo at full boost....no worries, gunner...we're all just regular men...we can take it, right?
____________
“We sleep safe in our beds because rough men
stand ready in the night to visit violence on those
who would do us harm.”
-George Orwell
|
gunner
Needs a life
Posts: 5778
|
posted December 23, 2005 09:39 AM
Worm A Hole........Take it to the smack house and we'll discuss it. Fish has spoken on this matter. Don't Jab and smile 
|
worm~hole
Needs a life
Miles to go before I sleep....
Posts: 10623
|
posted December 23, 2005 10:03 AM
...see you there...and remember: the rules of engagement dictate to knock it off below the deck....no joy there....I'm smiling, see?
____________
“We sleep safe in our beds because rough men
stand ready in the night to visit violence on those
who would do us harm.”
-George Orwell
|
ninja12
Needs a job
Posts: 3310
|
posted December 23, 2005 10:04 AM
Good luck guys.
Hope this one is not like the zx12.
Did ANYONE get the MUZZY zx12 package
to perform?
|
turbo1320
Novice Class
Posts: 51
|
posted December 23, 2005 03:08 PM
quote:
hey gunner... Please take you're battle with turbo to the Smackhouse. Leave this topic open to technical discussion.
Thanks
Thank you Fish-Antlers for your statement, Guys this topic is a Technical discussion on The Muzzy 500HP ZX10 so dont let one person ruin this post Thank You!!!! As you guys Know the 1000cc WAR is on and Rob has put togeather the weapon of choice there is no other 1000cc bike out there that will make 500Hp for the same money and stay together even a Busa wont make 500HP with stock rods. This is a strong motor it can handle the power, If you guys are serious about your sport and your racing this is the Turbo Kit to get !!!! For More INFO Call Dave at Muzzys 541-385-0706 ext 106 or E-Mail Dave@muzzys.com You Better make that call now the new season is upon us. First come first serve.
|
|
|
HOME
NEW TOPIC