Rickey Gadson
Expert Class
Posts: 253
|
posted February 22, 2006 07:01 PM
300 hp ZX14
Just got off the phone with Coby, and you are not going to believe this but he just made 300hp and 195ftlbs of torque from a stock motor with Nitrous.
Stock pistons and all!!!!!!!!!!
First he made 240 before the clutch started slipping, and then after shimming the stock clutch he made 265 before clutch started slipping again.
After more shimming he made 300hp.
All with stock pistons and a slip on pipe and NO power commander.
UN-BELIEVABLE!!!!!!!!!!!!!!!!!
____________
Rickey Gadson
   
|
osti33
Needs a job
Posts: 2973
|
posted February 22, 2006 07:06 PM
That is a whole lot of power for a stock top end!! WOW! 
|
pmkin10r
Expert Class
Posts: 191
|
posted February 22, 2006 07:15 PM
Sweeet!! Now how much did it make without the slip-on and NOS?
|
zx12richard
Pro
The Green Monster..
Posts: 1133
|
posted February 22, 2006 07:16 PM
Wet or dry??? There goes the neighborhood...
|
Rickey Gadson
Expert Class
Posts: 253
|
posted February 22, 2006 08:09 PM
wet!
____________
Rickey Gadson
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted February 22, 2006 08:55 PM
Oh, my God!!!! that is awesome!!!
____________
200-MPH CLUB MEMBER!
|
gunner
Needs a life
Posts: 5778
|
posted February 22, 2006 10:13 PM
Yea and if that was Coby's dyno you can bank on it being there and MORE! His numbers are always low compared to most all others. His numbers are REAL!!!! NO MATTER where you take it and pull it next you will see those numbers and more! The 14 is still ugly BUT I'm impressed with the power. It will be like a less that Stellar woman with great sex  Not much to look at BUT watch her get the job done 
|
Ninjaman12R
Needs a job
as a Deal's Gap tour guide.
Posts: 4767
|
posted February 23, 2006 03:29 AM
Hell my ol' 185 Exciter mad that much power.
NOT!!!!
That's insane man, just insane. It's an ugly bastard, but no doubt it's a fast sumbiatch. 
____________
What we're dealin' with here is a complete lack of respect for the law.
Sheriff Buford T. Justice of TEXAS
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted February 23, 2006 04:22 AM
Most impressive!
How many pulls were made with that much Nitrous?
Richard Gadson told me it had a very stout engine design.
Stated that Rob Muzzy was very impressed with the strength engineered in to this motor!
Like to see some new timeslips !
Nasty looks, nasty is, nasty she does!
ride dat biotch.
Gotta love her eh!
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
harryzx-12
Needs a job
Posts: 3643
|
posted February 23, 2006 04:27 AM
That's a lot of HP!
____________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways- Body thoroughly used up, totally worn out...Screaming "WOO HOO, What a Ride !!!"
|
kawasabi
Expert Class
Posts: 150
|
posted February 23, 2006 04:38 AM
 Edited By: kawasabi on 23 Feb 2006 04:38
HOLY HORSEPOWER, BATMAN!
|
mrsantafe
Zone Head
Posts: 521
|
posted February 23, 2006 11:03 AM
Wow! Now i'm waiting for someone to do a bigbore kit that makes a reliable 220-225 hp. When this happens they will be getting my business! This will be for normal everyday cruising and then add the Nos to make the bike over 300 hp. Then, when some of those busa fellas with mild turbo's want to get frisky, i'll be waitng so serve them humble pie!!
____________
9.78@155.13 mph 1.71 60 ft @ a near mile high dragstrip
2006 ZX14 gone
2006 ZX10r (Wifes street bike)
2004 zx10r (her race bike)
2002 ZX12 (still kicking a--)
2007 gsxr 1k (race bike)
|
Megabyte
Pro
Posts: 1047
|
posted February 23, 2006 11:03 AM
Can you describe the Nitrous system and Setup ?
____________
We First make our habits and then our habits make us.
|
RAC4IT
Needs a job
Bergie
Posts: 3009
|
posted February 23, 2006 12:14 PM
Not surprising to me since my basic 1290cc ZX12 makes over 290rwhp with a simple two-nozzle dry shot.
|
kcadby
Pro
Posts: 1733
|
posted February 25, 2006 10:47 AM
AWSOME Ricky/Coby...
DOESN'T surprise me a bit though
John's 1260 makes 272+/168 with my ONE-nozzle Dry-Shot so far without touching the Map-or-buttons on the PC
John isn't used to riding it with the 270+ yet so I haven't had to up the jet...YET...
I ran 164mph with the "old gearing"...John (40-50Lb more than me) has been 164 with the new gearing...
Can't wait to see/hear the ET/ MPH Ricky!?!?!?
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted February 25, 2006 01:19 PM
The best part about the 14 is that its big factory horsepower...
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
FearsomeK
Novice Class
Posts: 96
|
posted February 27, 2006 02:28 AM
Hey Rickey, or anyone else in the know,
Alot of Busa guys in the UK are saying the coby Adams run of 8.7 stock motor could not have been right and that spray has been used up to 330ft then let off to show more normal mph figures. The bike did have a NOS bottle on for the shifter which is helping their scepticism.
Was this run truly stock motor and is there evidence of other bikes with 200hp or slightly less doing as quick a 330ft?
|
VPN
Zone Head
Posts: 718
|
posted February 27, 2006 03:14 AM
Ofcourse these former reliable persons love to ruin their reputation (and KHI's) forever
by doing such a fraud - the busanists are always right
especially if Hayabusa is suddenly losing badly!!
|
CrotchRocket
Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted February 27, 2006 06:37 AM
quote:
Ofcourse these former reliable persons love to ruin their reputation (and KHI's) forever
by doing such a fraud - the busanists are always right
especially if Hayabusa is suddenly losing badly!!
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
bossman12r
Zone Head
Posts: 513
|
posted March 02, 2006 01:31 PM
So how different is the frame from a 12? Will a 14 motor bolt in a zx12?
____________
gen 4 zx10 is fast
|
nightmare
Pro
ACP Racing
Posts: 1797
|
posted March 24, 2006 06:07 PM
damn now that's what I like to hear boys
!
____________
2006 ZX14 Ninja "SWINE FLU"
60ft 1.23
8th Mile 5.16
ACP Racing
|
VPN
Zone Head
Posts: 718
|
posted March 25, 2006 01:25 AM
Edited By: VPN on 27 Mar 2006 22:41
quote:
So how different is the frame from a 12? Will a 14 motor bolt in a zx12?
Will Not !
The connection points are different - compare the pictures
Remember that everything is new
Handling has changed a lot - this is a whole new bike!
|
bossman12r
Zone Head
Posts: 513
|
posted March 27, 2006 01:55 PM
To bad for the old school zx12 and to bad my motor throw a rod or i could have sold it and bought a zx14 
____________
gen 4 zx10 is fast
|
BobC
Pro
Posts: 1736
|
posted March 28, 2006 07:05 AM
Edited By: BobC on 28 Mar 2006 07:05
I know you're using the bike for drag racing Rickey and top speed isn't so important, at least until you exceed 186 in a quarter but are you still using the stock ECU ?
____________
Candy Thunder Blue 2006 ZZR1400
Stock wheelbase
Max: 205.4 mph in 1.25 miles
2012 ZZR1400 in Golden Blazed Green
Brock CT Full System. etc
Max: 203.1 in 1 mile (so far)
|
hotzxrod
Novice Class
Posts: 99
|
posted March 30, 2006 08:03 PM
its going to be a great day when papa gets his ...
____________
tilthewheelsfalloff
|
|
|
HOME
NEW TOPIC