Boman

Expert Class
Posts: 410
|
posted July 12, 2004 01:03 PM
(Don't holler about this): What oil are you using ?
I know this is a question that has been asked before,but humor me and answer the question.Which brand of oil do you prefer? Do you use the synthetic ? Do you stay with Kawasaki oil filters ?
|
papawheelie

Expert Class
Posts: 381
|
posted July 12, 2004 02:41 PM
royal purple.
|
CanyonCarver

Expert Class
Posts: 121
|
posted July 12, 2004 03:05 PM
Motul. 5100. Yes.
|
whitesands26
Novice Class
Posts: 84
|
posted July 12, 2004 03:16 PM
Mobile 1 MX4T or Mobile1 15W50 red cap car oil. Stock oil filter
|
sabersaw30
Parking Attendant
Posts: 8
|
posted July 12, 2004 03:21 PM
10w40 kawa chem with oem oil filters.Stick with kawasaki oil that way if something goes wrong they can't say you did not use there oil.
|
ice 1
Novice Class
Posts: 32
|
posted July 12, 2004 03:30 PM
Mobil MX-4T Synthetic
Why? OK, since you asked. I think any of the premium brands of synthetic oil are good - Mobil, motul, amsoil, etc. But I have a good Mobil MX4T story.
For the last race weekend of the CMRA 2001 season, we decided to enter the TL1000R into the 6-hour endurance race just for fun. We were gridded at the back of the pack since we had no season endurance points, but were leading the race by the end of the second hour. During a red flag about 1/2 way through the race, the bike smelled like it was really hot, and the rider confirmed that the temp gage had been going crazy, but the bike kept running well. We didn't realize it then, but the back side of the front cylinder block had developed a crack and we lost all the coolant.
We went on to run for 3 more hours and take the class and overall wins. There was absolutely no coolant left in the bike after the race. When I tore down the motor, I found that the heads were warped and the pistons were cracked in several places. But all the bearings looked fine. We were running Mobil MX4T, and after a torture test like that, I've never seen a reason to run anything else.
|
kz2zx

Pro
Nobody in Particular
Posts: 1166
|
posted July 12, 2004 03:32 PM
Motul. 5100. No - Purolator Pure One something-something-something-610.
____________
ASMA 47
WERA 147
www.dhowellbooks.com
|
theturboeffect

Novice Class
Posts: 56
|
posted July 12, 2004 03:34 PM
Right now since I am still breaking in I am using Kendall Gt1. After that Motul.
|
kdecelle

Novice Class
Posts: 47
|
posted July 12, 2004 08:04 PM
suzuki brand 10w40 4 stroke engine oil. Next oil change - castrol gtx 10x40
____________
Hey indian larry, even my 5 year old knows that "no helmet equals no bike".
|
TEAM WFO
Novice Class
Posts: 37
|
posted July 12, 2004 08:37 PM
Mobil 1 15-50wt Use the stock Kawi oil filter.
|
Nelson10R
Novice Class
Posts: 41
|
posted July 12, 2004 11:46 PM
Ditto Team WFO
I get the non energy conserving type Mobil 1 5-50wt from Wal mart dirt cheap NO clutch slipping at all. Tranny shifts soooooooo smooth now. More power too. :-)
Nelson10R
____________
Why put off till tomorrow a wheelie you can do today...
|
Nelson10R
Novice Class
Posts: 41
|
posted July 12, 2004 11:53 PM
Opps 15-50wt ( NOT 5-50 wt )
____________
Why put off till tomorrow a wheelie you can do today...
|
dougmeyer

Needs a job
moderated
Posts: 2713
|
posted July 13, 2004 06:57 AM
OK I'll tell you a Motul war story.
In 94 or 95 or so I was at Willow Springs for a 24 hr WERA Endurance race. There was a "back door" ZX-7 team run by some guys from KMC. I think Jason Pridmore was one of the riders but I could be wrong. Anyway, it seems that at one point they had some issue and had to fix the bike. In the ensuing thrash, the bike was sent out (full throttle tire spinning wheelie launch from the pits) with zero coolant in it. After at least 4 laps (maybe more) at race speeds the rider came in. The bike was so hot that, you literally couldn't get near it. Somebody spit on the cam cover and it sizzled like a cast iron griddle. They took a hose and cooled it off so they could work on it. The steam cloud looked like a nuclear power plant cooling tower. The engine came out and I watched as they disassembled it. It smelled absolutely horrible. Anything plastic or rubber was melted. The pistons skirts looked like silver cake frosting. But, the came lobes, buckets, bearings, crank- anything steel was perfect. Maybe a little gold, but no wear or spalling of any kind. I asked what the hell kind of oil they had in that thing, and that's the day I became a Motul guy.
Doug
|
Hamilton
Novice Class
Posts: 49
|
posted July 13, 2004 07:27 AM
Honda GN4. Yes.
____________
The liberal left never kept their promise...to move to Europe.
|
JNM

Expert Class
Posts: 109
|
posted July 13, 2004 02:40 PM
Ice1, Great story man. My 10 will be switching to Mobil 1 MX4T at 2500 miles, and my race bike (SV650 - Supersport motor) runs the Mobil 1. The SV shifts noticeably better since switching from dino.
____________
CCS #428
|
zeta xray

Expert Class
Posts: 416
|
posted July 13, 2004 05:08 PM
Mobil 1 MX4T 10w40 or Mobil 1 15W50. Stock Kawasaki oil filter.
The most amazing oil story I know of centers around an oil that I doubt should be used in motorcycles with wet clutches. Red Line Racing synthetic oil. I was working on an SCCA Sports 2000 race car. Hero driver ran off road leading a race. He managed to run over some small trees that ripped the oil lines out of the bottom of the car. He ran 3 more laps with no oil. Won the race. On the post race overhaul we found NO damage to pistons, rings, cylinder bores, bearings, crank, cam, NADA. I think it has a teflon additive which might make it undesirable for motorcycle use. But great oil.
|
AGT
Parking Attendant
Posts: 8
|
posted July 14, 2004 06:04 AM
Motul 300v Factory Line 10w40
|
salsa1
Needs a life
Posts: 5971
|
posted July 14, 2004 07:33 AM
Mobil 1 15 -50w for 1992 ZX-11 ; Mobil 1 MX4T for 2004 ZX-10R
PLUS MILITEC OIL: Proven Bang for buck HP gains. (dyno tested)
http://www.militec.co.nz/motorcycles1.asp
|
|
|