osti33

Needs a job
Posts: 2973
|
posted April 28, 2010 12:54 PM
Edited By: osti33 on 28 Apr 2010 20:54
quote: nice work, mike!!!
whose tail is that??
It looks like a catalyst or similar type tail section that they just cut back to move the seat further back.
|
Phantom13

Zone Head
Posts: 736
|
posted April 28, 2010 01:09 PM
I'm taking my time with my bike. Little work here, little work there.... just freetime when I get bored. Still waiting on my ECU..... so it's not like I can even start tuning yet.
The motor is still 1287cc's.. but with a MUCH better head than before with the latest and greatest tricks we learned on Dale's engine.
See, since my 1287 was the original guinea pig.... we went super conservative on everything. Over time and multiple teardowns for inspection between both our engines, we found a pretty effecient combo/set-up by making small changes and trying new things.
Right now for the first time, Dale and I have identical motors.
Mile Marker-1 only did the standing mile. Top Gun Run does the 1.25 mile run the last couple hours of the event.
As for Loring.... I wouldn't hold your breath. Besides, you seem to be doing a fine job upholding the ZX-12R's honor in that neck of the woods, as you do at your home track.
It would be interesting to see what these bikes would do in a standing 1.5 miles with great conditions on GPS. Perhaps a trip to the 9/10th's with continuous video footage of the run would suffice?
It wouldn't be anything official, but it would be enough for me.
____________
"The only place Success comes
before Work is inside the Dictionary."
|
Phantom13

Zone Head
Posts: 736
|
posted April 28, 2010 01:42 PM
Edited By: Phantom13 on 28 Apr 2010 21:53
Here's a couple pics of that 214mph Carbon Fiber N/A GSXR1000...


Rider: Nelson / Owner: Gabe
Jamtek Performance
WORLD'S FASTEST N/A LITERBIKE
R1 powered Go Kart

____________
"The only place Success comes
before Work is inside the Dictionary."
|
Shane661

Needs a life
Posts: 11494
|
posted April 28, 2010 03:11 PM
Edited By: Shane661 on 28 Apr 2010 23:12
quote: Here's a couple pics of that 214mph Carbon Fiber N/A GSXR1000...

That is a pretty nasty looking bike! It must have a WHOLE lot of motor.
|
ZRXDean

Needs a job
Posts: 2225
|
posted April 28, 2010 03:49 PM
That is a really impressive all motor speed, no matter what the displacement.
|
Phantom13

Zone Head
Posts: 736
|
posted April 28, 2010 03:52 PM
The bike itself is a work of art. I had the privilage of doing a complete inspection of the bike after the runs. Tailsection off the bike, tank lifted, inside fairings checked, swingarm, airbox, ram air tubes, nose section...... nothing.
Not a single line or nitrous component anywhere, very clean and professional bike with a cool team of guys.
____________
"The only place Success comes
before Work is inside the Dictionary."
|
osti33

Needs a job
Posts: 2973
|
posted April 28, 2010 04:03 PM
Edited By: osti33 on 29 Apr 2010 00:04
quote: That is a really impressive all motor speed, no matter what the displacement.
+1
That is a pretty impressive NA speed even for a 1350 class bike. Which I'm guessing is where that bike would fall in.
Nice looking bike too.
|
Phantom13

Zone Head
Posts: 736
|
posted April 28, 2010 04:11 PM
quote:
quote: Here's a couple pics of that 214mph Carbon Fiber N/A GSXR1000...

That is a pretty nasty looking bike! It must have a WHOLE lot of motor.
I don't know any details on the build, can't even remember the exact displacement.....
Let's just assume that if they can afford carbon fiber bodywork, carbon fiber wheels, carbon fiber complete ram air system, top shelf components everywhere, etc....... they probably have everything money can buy in the motor as well.
Just a guess, it would only make sense judging by the speed (and these speeds were consistantly between 210-214mph all day!)
For all I know, it could just be a really good build on an extremely well ridden and fine tuned uber light bike with nothing particularly exotic. I'd definately believe it, I know none of our racebikes have any crazy exotic parts like titanium rods, ti valves, billet cranks, etc... and they are running great speeds.
____________
"The only place Success comes
before Work is inside the Dictionary."
|
shiphteey

Needs a job
Posts: 2529
|
posted April 29, 2010 04:16 AM
Mike, bike looks good, hopefully one of these days we'll get to play. I'd like to run down at FL this year, I'll let you know more about if/when as time passes. Most likely post-Loring.
As for that Carbon 1k, wasn't that the one that Lee jumped on at Maxton...1143 cc or something? This one shown looks a little different...but its gotta be the same one. How many all carbon stroker 1k can there be? Especially ones that ran at the 9/10ths?
That looks like a fun 1k but I would say your 12 should walk it when push comes to shove.
A.
____________
Gemini Motorcycles
Topping out everything from Ninja 250s to nitrous ZX-14s.
|
Phantom13

Zone Head
Posts: 736
|
posted April 29, 2010 08:09 AM
Thanks Ali!
Yeah, that's the one.
I'm sure we will get to play again one of these days.
____________
"The only place Success comes
before Work is inside the Dictionary."
|
capt10ed
Expert Class
Posts: 327
|
posted April 29, 2010 05:22 PM
That is one SWEET ride!!!
____________
2014 Loring AFB 14 runs over 200mph
with a best of 208.1 in 1.5 miles
and 204.5 in the mile.
|
|
|