woppi
Pro
Posts: 1362
|
posted October 14, 2010 04:16 AM
? ? ?
any News ?
? ? ?
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
  
|
zxboy
Expert Class
Posts: 292
|
posted October 14, 2010 04:27 PM
 Edited By: zxboy on 15 Oct 2010 00:29
Hi Woppi....
Actually I do have some news !! Here are some pics of my charging system mod, as in "I removed it"
and I started messing around with a Muzzy timing advancer. The end result is it runs 5.60's on motor in the heat. My motor REALLY likes timing.
And I've got a few full 1/4 mile N2O passes on it....with the best being a 1.28 sixty footer, 5.32 @130 and 8.36 @159 that's with four #16 jets !!
Oh.... and I almost forgot. I made it onto the Speedtv "Passtime" dragrace game show. They were down here in August filming a bunch of episodes, me and a few of my dragbike buddies showed up and we made the show ......It should be airing sometime this month. I dusted a "outlaw" GSXR !! I'm excited to see how they edited all the film they took.
That's all for now....later, Roy
|
Stuart Racing
Zone Head
N.H.R.A . Dragracing.
Posts: 999
|
posted October 14, 2010 05:14 PM
Yeehaaw congrats on the Passtime show....Be lookin for ya....
Almost got ya a Top Gas bike there.....Good mph and e/t for a small tire bike....Good job....How are you retarding the timing on N20??
____________
Life in the Fast Lane..........
|
zxboy
Expert Class
Posts: 292
|
posted October 14, 2010 05:26 PM
Right now I'm setting the Muzzy advancer to -2 degrees if I'm gonna spray.....but I'm going to have to figure something out before I start spraying any bigger jets..... Maybe the DJ ignition module ?? I already have the hub
|
Stuart Racing
Zone Head
N.H.R.A . Dragracing.
Posts: 999
|
posted October 14, 2010 06:48 PM
If you have the hub do you have the LCD screen....If so you could have your N20 map loaded in there along with your N/A map and switch to the N20 whenever you are going to run the juice....
I have the LCD screen but not the hub and have about 6 different maps loaded, and depending on what I want to run I can just load whatever one I want.(touch screen).....
Are you just going to run the cover or make a plate for it....
Good job.....
____________
Life in the Fast Lane..........
|
zxboy
Expert Class
Posts: 292
|
posted October 14, 2010 07:55 PM
Edited By: zxboy on 15 Oct 2010 03:58
The software that comes with the hub allows a 2nd map to be stored and I'm running with the MPS relay that plugs into the hub...It activates the 2nd (N2O) map whenever the spray is on..... soooo if i got the ignition module I could also have a different "timing" map stored into the N2O map. I didn't know that the LCD screen was able to store so many maps ??
I'm running the stock cover...I just had to seal the hole with some RTV where the stator wires ran through the grommet. I have considered a trick looking coverplate....but that's a project for later on....
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted October 14, 2010 09:29 PM
Roy, last time we talked on the phone, did I talk to you about timing?
I bet that joker revs quick now......
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
Stuart Racing
Zone Head
N.H.R.A . Dragracing.
Posts: 999
|
posted October 15, 2010 06:07 AM
Ya Roy, it can store way over 10 diferent maps at one time....And being a touch screen you just pull the map down and touch and load....Very cool...But sounds like you got exactly what you need already.... Are you retarding only or adding it down track somewhere too.....
____________
Life in the Fast Lane..........
|
zxboy
Expert Class
Posts: 292
|
posted October 15, 2010 10:32 AM
Manual timing plate only......the markings aren't all that accurate...... so i set it by eye -2 while spraying  +5 for 1/4 mile +8 for 1/8 mile and Nox, yes its alot snappier with the flywheel off...................... you might want to think about it 
|
Stuart Racing
Zone Head
N.H.R.A . Dragracing.
Posts: 999
|
posted October 15, 2010 12:51 PM
I`m sure it is snappy...Taking off about 10 lbs(?) off the end of the crank will do that.....
We used to do that with the KZ motor`s and would really wake up the throttle response big time...
____________
Life in the Fast Lane..........
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted October 16, 2010 09:17 AM
Hmmmm
Might be my ticket to super comp at OK elevation.......LOL
You still button start?
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
zxboy
Expert Class
Posts: 292
|
posted October 16, 2010 04:36 PM
Yep, still button start. I've got one of those little lithium-ferrous batteries. I hit it with a 6 amp auto charger between rounds and I haven't (knock on wood) had a problem yet !!
|
|
|
HOME
NEW TOPIC